Skip to content
Zomma Golf
Menu

Wilson iron

The Wilson Staff Model Blade Irons is an iron in 9 options from 18°–46°, offered with 2 stock shafts, RH and LH.

Discontinued. Kept here because the published specs still matter to anyone playing one or buying used.

9
options
18–46
loft °
2
stock shafts
18
shaft × flex options
2021
released
Built against the iron fieldpublished figures only
DIFFERENCE FROM THE MEDIAN OF EVERY RECORD WE HOLDLOFTMEDIAN 33.0°30.0° -3LIEMEDIAN 62.5°61.5° -1LENGTHMEDIAN 37.00"37.75" +0.75OFFSETMEDIAN 0.115"0.075" -0.04
Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on Wilson →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Wilson.

This set's 7-iron is 34° — 86th percentile, weaker-lofted than 86% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

Wilson Staff Model Blade Ironsmiddle half of the field
2030405060123456789PWGW/AWSWLWLOFT (°)Wilson Staff Model Blade Irons — 2: 18°Wilson Staff Model Blade Irons — 3: 20°Wilson Staff Model Blade Irons — 4: 23°Wilson Staff Model Blade Irons — 5: 26°Wilson Staff Model Blade Irons — 6: 30°Wilson Staff Model Blade Irons — 7: 34°Wilson Staff Model Blade Irons — 8: 38°Wilson Staff Model Blade Irons — 9: 42°Wilson Staff Model Blade Irons — PW: 46°

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

Wilson Staff Model Blade Irons · 7-iron

LOFT · X AXIS34°
86th percentile — weaker-lofted than 86% of the 889 sets that publish a 7-iron
LIE · Y AXIS62°
44th percentile — flatter than 56% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Published offset of 0.065 in: the leading edge sits 0.065 in behind the line of the shaft, against a median of 0.12 in for the 7-iron of 580 iron sets on record that publish one.MEDIAN 0.12 inOFFSET 0.065 inSHAFTLEADING EDGE0.25 INLEADING EDGE BEHIND THE SHAFTNOMINAL OUTLINE · SEEN FROM THE TOE · TRUE SCALE

Wilson Staff Model Blade Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

Wilson's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

Wilson Staff Model Blade Ironsmiddle half of the field
0.050.10.150.223456789PWGW/AWSWLWOFFSET (IN)Wilson Staff Model Blade Irons — 2: 0.11 inWilson Staff Model Blade Irons — 3: 0.105 inWilson Staff Model Blade Irons — 4: 0.095 inWilson Staff Model Blade Irons — 5: 0.085 inWilson Staff Model Blade Irons — 6: 0.075 inWilson Staff Model Blade Irons — 7: 0.065 inWilson Staff Model Blade Irons — 8: 0.058 inWilson Staff Model Blade Irons — 9: 0.052 inWilson Staff Model Blade Irons — PW: 0.045 in

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

Stock shaft build

Across every build: this club's stock shafts run weight from the 89th to the 98th percentile, and torque from the 12th to the 14th percentile.

Stock shaft: Weight against Torque

The cloud is every iron shaft variant on record that publishes both weight and torque — 1,534 of them, binned by density.

Specifications by option

What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.

9 rows, unsorted, collapsed — use the button below the table to show every option.

182-ironRH590.11not published39.75D2
203-ironRH59.50.1052.539.25D2
234-ironRH / LH600.0952.538.75D2
265-ironRH / LH610.0852.538.25D2
306-ironRH / LH61.50.075337.75D2
347-ironRH / LH620.065437.25D2
388-ironRH / LH630.058536.75D2
429-ironRH / LH63.50.0525.536.25D2
46PWRH / LH640.045635.75D2

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Wilson did not publish that figure — we don't estimate.

Stock shafts (2)

Every shaft Wilson lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

KBS C-Taper aftermarket 9 builds · 18°–46° · 1 flex · 125 g · 1.85°
Weight
125 g
Torque
1.85°
Launch
low
Spin
low
Flexes
S+

9 rows, unsorted.

182-ironS+RH1251.855939.75D2
203-ironS+RH1251.8559.539.25D2
234-ironS+RH / LH1251.856038.75D2
265-ironS+RH / LH1251.856138.25D2
306-ironS+RH / LH1251.8561.537.75D2
347-ironS+RH / LH1251.856237.25D2
388-ironS+RH / LH1251.856336.75D2
429-ironS+RH / LH1251.8563.536.25D2
46PWS+RH / LH1251.856435.75D2

Full specs for KBS C-Taper →

Nippon Shaft N.S.PRO MODUS3 Tour 120 aftermarket 9 builds · 18°–46° · 1 flex · 114 g · 1.7°
Weight
114 g
Torque
1.7°
Launch
mid
Flexes
S

9 rows, unsorted.

182-ironSRH1141.75939.75D2
203-ironSRH1141.759.539.25D2
234-ironSRH / LH1141.76038.75D2
265-ironSRH / LH1141.76138.25D2
306-ironSRH / LH1141.761.537.75D2
347-ironSRH / LH1141.76237.25D2
388-ironSRH / LH1141.76336.75D2
429-ironSRH / LH1141.763.536.25D2
46PWSRH / LH1141.76435.75D2

Full specs for Nippon Shaft N.S.PRO MODUS3 Tour 120 →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:

  • Stock shafts: FST KBS Tour C-Taper 125 (S), Nippon NS Pro Modus 3 Tour 120 (S) -- only Stiff flex confirmed in surviving sources.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

FigurePublishedAll irons2021Among its peers
Strongest-lofted 7-iron34°=677th of 953=31st of 36=27th of 39 Wilson irons · =246th of 508 low-handicap irons
Most offset at the 7-iron0.065"=566th of 58326th of 26=17th of 18 Wilson irons · =266th of 283 low-handicap irons
Widest loft range28°=719th of 1,104=27th of 4227th of 42 Wilson irons · =304th of 508 low-handicap irons
Most upright lie62°=539th of 941=17th of 35=2nd of 38 Wilson irons · =264th of 505 low-handicap irons
Longest37.3"=49th of 894=3rd of 35=17th of 38 Wilson irons · =8th of 466 low-handicap irons

player level — derived

This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.065", 7-iron loft 34°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs New Level 902-OS · vs Ben Hogan Edge EX Irons · vs Tour Edge Exotics C721 Iron Set

More irons

Other Wilson irons on record. Irons released in 2021 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

  • Wilson's own specs, partly built.Taken from Wilson's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
  • Published options, built.9 configurations with 6 of the 7 specs an iron can publish.
  • Stock shaft, built.2 stock shafts, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 2 fields we don't hold — or tell us something here is wrong