Skip to content
Zomma Golf
Menu

Wilson iron

The Wilson D9 Forged Irons is an iron in 9 options from 19°–49°, offered with 3 stock shafts, RH and LH.

Discontinued. Kept here because the published specs still matter to anyone playing one or buying used.

9
options
19–49
loft °
3
stock shafts
27
shaft × flex options
2021
released
Built against the iron fieldpublished figures only
DIFFERENCE FROM THE MEDIAN OF EVERY RECORD WE HOLDLOFTMEDIAN 33.0°30.0° -3LIEMEDIAN 62.5°62.0° -0.5LENGTHMEDIAN 37.00"37.25" +0.25OFFSETMEDIAN 0.115"0.100" -0.015
Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on Wilson →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Wilson.

This set's 7-iron is 30° — 31st percentile, stronger-lofted than 69% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

Wilson D9 Forged Ironsmiddle half of the field
2030405060123456789PWGW/AWSWLWLOFT (°)Wilson D9 Forged Irons — 3: 19°Wilson D9 Forged Irons — 4: 21.5°Wilson D9 Forged Irons — 5: 24.5°Wilson D9 Forged Irons — 6: 27.5°Wilson D9 Forged Irons — 7: 30°Wilson D9 Forged Irons — 8: 34.5°Wilson D9 Forged Irons — 9: 39°Wilson D9 Forged Irons — PW: 44°Wilson D9 Forged Irons — GW: 49°

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

Wilson D9 Forged Irons · 7-iron

LOFT · X AXIS30°
31st percentile — stronger-lofted than 69% of the 889 sets that publish a 7-iron
LIE · Y AXIS62°
44th percentile — flatter than 56% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Published offset of 0.1 in: the leading edge sits 0.1 in behind the line of the shaft, against a median of 0.12 in for the 7-iron of 580 iron sets on record that publish one.MEDIAN 0.12 inOFFSET 0.1 inSHAFTLEADING EDGE0.25 INLEADING EDGE BEHIND THE SHAFTNOMINAL OUTLINE · SEEN FROM THE TOE · TRUE SCALE

Wilson D9 Forged Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

Wilson's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

Wilson D9 Forged Ironsmiddle half of the field
0.050.10.150.223456789PWGW/AWSWLWOFFSET (IN)Wilson D9 Forged Irons — 3: 0.166 inWilson D9 Forged Irons — 4: 0.15 inWilson D9 Forged Irons — 5: 0.133 inWilson D9 Forged Irons — 6: 0.117 inWilson D9 Forged Irons — 7: 0.1 inWilson D9 Forged Irons — 8: 0.084 inWilson D9 Forged Irons — 9: 0.067 inWilson D9 Forged Irons — PW: 0.05 inWilson D9 Forged Irons — GW: 0.04 in

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

Stock shaft build

Across every build: this club's stock shafts run weight at the 36th percentile, and torque at the 78th percentile.

Stock shaft: Weight against Torque

The cloud is every iron shaft variant on record that publishes both weight and torque — 1,534 of them, binned by density.

Specifications by option

What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.

9 rows, unsorted, collapsed — use the button below the table to show every option.

193-ironRH / LH59.50.1662.539.25D2
21.54-ironRH / LH600.15338.75D2
24.55-ironRH / LH610.1333.538.25D2
27.56-ironRH / LH61.50.1174.537.75D2
307-ironRH / LH620.1537.25D2
34.58-ironRH / LH630.0845.536.75D2
399-ironRH / LH63.50.0676.536.25D2
44PWRH / LH640.05735.75D2
49GWRH / LH640.04835.5D2

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Wilson did not publish that figure — we don't estimate.

Stock shafts (3)

Every shaft Wilson lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

True Temper Dynamic Gold 105 aftermarket 9 builds · 19°–49° · 1 flex · 103 g
Weight
103 g
Flexes
S

9 rows, unsorted.

193-ironSRH / LH10359.539.25D2
21.54-ironSRH / LH1036038.75D2
24.55-ironSRH / LH1036138.25D2
27.56-ironSRH / LH10361.537.75D2
307-ironSRH / LH1036237.25D2
34.58-ironSRH / LH1036336.75D2
399-ironSRH / LH10363.536.25D2
44PWSRH / LH1036435.75D2
49GWSRH / LH1036435.5D2

Full specs for True Temper Dynamic Gold 105 →

True Temper Dynamic Gold 95 aftermarket 9 builds · 19°–49° · 1 flex · 97 g
Weight
97 g
Flexes
R

9 rows, unsorted.

193-ironRRH / LH9759.539.25D2
21.54-ironRRH / LH976038.75D2
24.55-ironRRH / LH976138.25D2
27.56-ironRRH / LH9761.537.75D2
307-ironRRH / LH976237.25D2
34.58-ironRRH / LH976336.75D2
399-ironRRH / LH9763.536.25D2
44PWRRH / LH976435.75D2
49GWRRH / LH976435.5D2

Full specs for True Temper Dynamic Gold 95 →

UST Mamiya Recoil DART 55/65/75 aftermarket 9 builds · 19°–49° · 1 flex · 72 g · 3.9°
Weight
72 g
Torque
3.9°
Launch
mid
Flexes
R

9 rows, unsorted.

193-ironRRH / LH723.959.539.25D2
21.54-ironRRH / LH723.96038.75D2
24.55-ironRRH / LH723.96138.25D2
27.56-ironRRH / LH723.961.537.75D2
307-ironRRH / LH723.96237.25D2
34.58-ironRRH / LH723.96336.75D2
399-ironRRH / LH723.963.536.25D2
44PWRRH / LH723.96435.75D2
49GWRRH / LH723.96435.5D2

Full specs for UST Mamiya Recoil DART 55/65/75 →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

FigurePublishedAll irons2021Among its peers
Strongest-lofted 7-iron30°=189th of 953=12th of 36=8th of 39 Wilson irons · =8th of 508 low-handicap irons
Most offset at the 7-iron0.1"=395th of 58319th of 26=7th of 18 Wilson irons · =95th of 283 low-handicap irons
Widest loft range30°=552nd of 1,104=16th of 42=18th of 42 Wilson irons · =191st of 508 low-handicap irons
Most upright lie62°=539th of 941=17th of 35=2nd of 38 Wilson irons · =264th of 505 low-handicap irons
Longest37.3"=49th of 894=3rd of 35=17th of 38 Wilson irons · =8th of 466 low-handicap irons

player level — derived

This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.1", 7-iron loft 30°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs New Level 902-OS · vs Ben Hogan Edge EX Irons · vs Tour Edge Exotics C721 Iron Set

More irons

Other Wilson irons on record. Irons released in 2021 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

  • Wilson's own specs, partly built.Taken from Wilson's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
  • Published options, built.9 configurations with 6 of the 7 specs an iron can publish.
  • Stock shaft, built.3 stock shafts, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 2 fields we don't hold — or tell us something here is wrong