Skip to content
Zomma Golf
Menu

Wilson iron

The Wilson D9 Irons is an iron in 16 options from 18°–53°, offered with the KBS MAX Ultralite (MAX 80), RH and LH.

Discontinued. Kept here because the published specs still matter to anyone playing one or buying used.

16
options
18–53
loft °
1
stock shaft
32
shaft × flex options
2021
released
Built against the iron fieldpublished figures only
DIFFERENCE FROM THE MEDIAN OF EVERY RECORD WE HOLDLOFTMEDIAN 33.0°32.0° -1LIEMEDIAN 62.5°63.0° +0.5LENGTHMEDIAN 37.00"37.00" 0OFFSETMEDIAN 0.115"0.176" +0.061
Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on Wilson →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Wilson.

This set's 7-iron is 27° — 5th percentile, stronger-lofted than 95% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

Wilson D9 Ironsmiddle half of the field
2030405060123456789PWGW/AWSWLWLOFT (°)Wilson D9 Irons — 4: 18°Wilson D9 Irons — 5: 21°Wilson D9 Irons — 6: 24°Wilson D9 Irons — 7: 27°Wilson D9 Irons — 8: 32°Wilson D9 Irons — 9: 37°Wilson D9 Irons — PW: 42°Wilson D9 Irons — GW: 47°Wilson D9 Irons — SW: 53°

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Wilson D9 Irons · 7

LOFT · X AXIS27°
5th percentile — stronger-lofted than 95% of the 889 sets that publish a 7-iron
LIE · Y AXIS62°
44th percentile — flatter than 56% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Published offset of 0.196 in: the leading edge sits 0.196 in behind the line of the shaft, against a median of 0.12 in for the 7-iron of 580 iron sets on record that publish one.MEDIAN 0.12 inOFFSET 0.196 inSHAFTLEADING EDGE0.25 INLEADING EDGE BEHIND THE SHAFTNOMINAL OUTLINE · SEEN FROM THE TOE · TRUE SCALE

Wilson D9 Irons · 7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

Wilson's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

Wilson D9 Ironsmiddle half of the field
0.050.10.150.20.2523456789PWGW/AWSWLWOFFSET (IN)Wilson D9 Irons — 4: 0.256 inWilson D9 Irons — 5: 0.236 inWilson D9 Irons — 6: 0.216 inWilson D9 Irons — 7: 0.196 inWilson D9 Irons — 8: 0.176 inWilson D9 Irons — 9: 0.156 inWilson D9 Irons — PW: 0.136 inWilson D9 Irons — GW: 0.116 inWilson D9 Irons — SW: 0.086 in

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

Wilson publishes no shaft weight or torque for any of the builds this club ships in, so there is nothing to place them against. Every stock shaft is still listed below, with whatever the maker does publish.

Specifications by option

What this record publishes. Across 16 options: loft, lie, length and swingweight on every one.

16 rows, unsorted, collapsed — use the button below the table to show every option.

184-ironRH / LH600.256239D0 / D1
215-ironRH / LH610.236238.5D0 / D1
246-ironRH / LH61.50.216238D0 / D1
328-ironRH / LH630.176537D0 / D1
379-ironRH / LH63.50.156636.5D0 / D1
42PWRH / LH640.136636D0 / D1
47GWRH / LH640.116635.75D0 / D1
184RH / LH60not publishednot published39D0 / D1
215RH / LH61not publishednot published38.5D0 / D1
246RH / LH61.5not publishednot published38D0 / D1
277RH / LH620.196337.5D0 / D1
328RH / LH63not publishednot published37D0 / D1
379RH / LH63.5not publishednot published36.5D0 / D1
42PWRH / LH64not publishednot published36D0 / D1
47GWRH / LH64not publishednot published35.75D0 / D1
53SWRH / LH640.086635.5D0 / D1

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Wilson did not publish that figure — we don't estimate.

Stock shafts (1)

Every shaft Wilson lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

KBS MAX Ultralite (MAX 80) aftermarket specs pending 32 builds · 18°–53° · 2 flexes
Flexes
R, S

32 rows, unsorted.

184RRH / LH6039D0 / D1
184-ironRRH / LH6039D0 / D1
184SRH / LH6039D0 / D1
184-ironSRH / LH6039D0 / D1
215RRH / LH6138.5D0 / D1
215-ironRRH / LH6138.5D0 / D1
215SRH / LH6138.5D0 / D1
215-ironSRH / LH6138.5D0 / D1
246RRH / LH61.538D0 / D1
246-ironRRH / LH61.538D0 / D1
246SRH / LH61.538D0 / D1
246-ironSRH / LH61.538D0 / D1
277RRH / LH6237.5D0 / D1
277SRH / LH6237.5D0 / D1
328RRH / LH6337D0 / D1
328-ironRRH / LH6337D0 / D1
328SRH / LH6337D0 / D1
328-ironSRH / LH6337D0 / D1
379RRH / LH63.536.5D0 / D1
379-ironRRH / LH63.536.5D0 / D1
379SRH / LH63.536.5D0 / D1
379-ironSRH / LH63.536.5D0 / D1
42PWRRH / LH6436D0 / D1
42PWRRH / LH6436D0 / D1
42PWSRH / LH6436D0 / D1
42PWSRH / LH6436D0 / D1
47GWRRH / LH6435.75D0 / D1
47GWRRH / LH6435.75D0 / D1
47GWSRH / LH6435.75D0 / D1
47GWSRH / LH6435.75D0 / D1
53SWRRH / LH6435.5D0 / D1
53SWSRH / LH6435.5D0 / D1

Full specs for KBS MAX Ultralite (MAX 80) →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:

  • Graphite stock shaft (Mitsubishi Tensei AV Silver) has no resolvable shaft_ref in data/shafts/ -- left off stock_shaft_options.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

FigurePublishedAll irons2021Among its peers
Strongest-lofted 7-iron27°=12th of 953=2nd of 36=1st of 39 Wilson irons · =12th of 208 high-handicap irons
Most offset at the 7-iron0.196"=53rd of 5831st of 26=1st of 18 Wilson irons · =41st of 155 high-handicap irons
Widest loft range35°=325th of 1,104=5th of 42=7th of 42 Wilson irons · =80th of 208 high-handicap irons
Most upright lie62°=539th of 941=17th of 35=2nd of 38 Wilson irons · =119th of 203 high-handicap irons
Longest37.5"=8th of 894=1st of 35=1st of 38 Wilson irons · =5th of 201 high-handicap irons

player level — derived

This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.196", 7-iron loft 27°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs New Level 902-OS · vs Ben Hogan Edge EX Irons · vs Tour Edge Exotics C721 Iron Set

More irons

Other Wilson irons on record. Irons released in 2021 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

  • Wilson's own specs, partly built.Taken from Wilson's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
  • Published options, built.16 configurations with 6 of the 7 specs an iron can publish.
  • Stock shaft, built.1 stock shaft, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 2 fields we don't hold — or tell us something here is wrong