Ben Hogan iron
The Ben Hogan Edge EX Irons is an iron in 7 options from 20°–44°, offered with 3 stock shafts, RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Ben Hogan.
This set's 7-iron is 32° — 60th percentile, weaker-lofted than 60% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Ben Hogan Edge EX Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Ben Hogan Edge EX Irons · 7-iron
- LOFT · X AXIS32°
- 60th percentile — weaker-lofted than 60% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Ben Hogan Edge EX Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Ben Hogan's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Ben Hogan Edge EX Ironsmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight from the 65th to the 91st percentile.
Stock shaft: Weight on record
Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.
90 — 251 iron shaft variants · 13% of 1,910
Specifications by option
What this record publishes. Across 7 options: loft, lie and length on every one.
7 rows, unsorted.
| 20 | 4-iron | RH / LH | 60 | 0.23 | 39 | 10 | 2 |
| 24 | 5-iron | RH / LH | 61 | 0.218 | 38.25 | 12 | 3 |
| 28 | 6-iron | RH / LH | 62 | 0.207 | 37.5 | 12 | 3 |
| 32 | 7-iron | RH / LH | 62.5 | 0.195 | 37 | 14 | 3 |
| 36 | 8-iron | RH / LH | 63 | 0.183 | 36.5 | 14 | 3 |
| 40 | 9-iron | RH / LH | 63.5 | 0.172 | 36 | 18 | 4 |
| 44 | PW | RH / LH | 64 | 0.16 | 35.75 | 18 | 4 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Ben Hogan did not publish that figure — we don't estimate.
Stock shafts (3)
Every shaft Ben Hogan lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
KBS Tour Lite aftermarket 14 builds · 20°–44° · 2 flexes · 95–100 g
- Weight
- 95–100 g
- Launch
- high
- Spin
- high
- Flexes
- R, S
14 rows, unsorted.
| 20 | 4-iron | R | RH / LH | 95 | 60 | 39 |
| 20 | 4-iron | S | RH / LH | 100 | 60 | 39 |
| 24 | 5-iron | R | RH / LH | 95 | 61 | 38.25 |
| 24 | 5-iron | S | RH / LH | 100 | 61 | 38.25 |
| 28 | 6-iron | R | RH / LH | 95 | 62 | 37.5 |
| 28 | 6-iron | S | RH / LH | 100 | 62 | 37.5 |
| 32 | 7-iron | R | RH / LH | 95 | 62.5 | 37 |
| 32 | 7-iron | S | RH / LH | 100 | 62.5 | 37 |
| 36 | 8-iron | R | RH / LH | 95 | 63 | 36.5 |
| 36 | 8-iron | S | RH / LH | 100 | 63 | 36.5 |
| 40 | 9-iron | R | RH / LH | 95 | 63.5 | 36 |
| 40 | 9-iron | S | RH / LH | 100 | 63.5 | 36 |
| 44 | PW | R | RH / LH | 95 | 64 | 35.75 |
| 44 | PW | S | RH / LH | 100 | 64 | 35.75 |
KBS Tour-V aftermarket 14 builds · 20°–44° · 2 flexes · 110–120 g
- Weight
- 110–120 g
- Spin
- low
- Flexes
- S, X
14 rows, unsorted.
| 20 | 4-iron | S | RH / LH | 110 | 60 | 39 |
| 20 | 4-iron | X | RH / LH | 120 | 60 | 39 |
| 24 | 5-iron | S | RH / LH | 110 | 61 | 38.25 |
| 24 | 5-iron | X | RH / LH | 120 | 61 | 38.25 |
| 28 | 6-iron | S | RH / LH | 110 | 62 | 37.5 |
| 28 | 6-iron | X | RH / LH | 120 | 62 | 37.5 |
| 32 | 7-iron | S | RH / LH | 110 | 62.5 | 37 |
| 32 | 7-iron | X | RH / LH | 120 | 62.5 | 37 |
| 36 | 8-iron | S | RH / LH | 110 | 63 | 36.5 |
| 36 | 8-iron | X | RH / LH | 120 | 63 | 36.5 |
| 40 | 9-iron | S | RH / LH | 110 | 63.5 | 36 |
| 40 | 9-iron | X | RH / LH | 120 | 63.5 | 36 |
| 44 | PW | S | RH / LH | 110 | 64 | 35.75 |
| 44 | PW | X | RH / LH | 120 | 64 | 35.75 |
True Temper Dynamic Gold 105 aftermarket 14 builds · 20°–44° · 2 flexes · 101–103 g
- Weight
- 101–103 g
- Flexes
- R300, S300
14 rows, unsorted.
| 20 | 4-iron | R300 | RH / LH | 101 | 60 | 39 |
| 20 | 4-iron | S300 | RH / LH | 103 | 60 | 39 |
| 24 | 5-iron | R300 | RH / LH | 101 | 61 | 38.25 |
| 24 | 5-iron | S300 | RH / LH | 103 | 61 | 38.25 |
| 28 | 6-iron | R300 | RH / LH | 101 | 62 | 37.5 |
| 28 | 6-iron | S300 | RH / LH | 103 | 62 | 37.5 |
| 32 | 7-iron | R300 | RH / LH | 101 | 62.5 | 37 |
| 32 | 7-iron | S300 | RH / LH | 103 | 62.5 | 37 |
| 36 | 8-iron | R300 | RH / LH | 101 | 63 | 36.5 |
| 36 | 8-iron | S300 | RH / LH | 103 | 63 | 36.5 |
| 40 | 9-iron | R300 | RH / LH | 101 | 63.5 | 36 |
| 40 | 9-iron | S300 | RH / LH | 103 | 63.5 | 36 |
| 44 | PW | R300 | RH / LH | 101 | 64 | 35.75 |
| 44 | PW | S300 | RH / LH | 103 | 64 | 35.75 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2021 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 32° | =438th of 953 | =25th of 36 | =192nd of 208 high-handicap irons |
| Most offset at the 7-iron | 0.195" | 57th of 583 | 2nd of 26 | 45th of 155 high-handicap irons |
| Widest loft range | 24° | =915th of 1,104 | =36th of 42 | =2nd of 12 Ben Hogan irons · =199th of 208 high-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | =11th of 35 | =55th of 203 high-handicap irons |
| Longest | 37" | =265th of 894 | =11th of 35 | =110th of 201 high-handicap irons |
player level — derived
This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.195", 7-iron loft 32°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs New Level 902-OS · vs Tour Edge Exotics C721 Iron Set · vs Takomo Iron 101
More irons
Ben Hogan Icon Irons 2020 · 22°–46° · 7 options · 2 stock shafts Ben Hogan PTx Pro Irons 2019 · 22°–46° · 7 options · 2 stock shafts Ben Hogan PTx Tour Irons 2024 · 21.5°–45.5° · 7 options · 2 stock shafts Ben Hogan Fort Worth CB Irons 2025 · 23°–46° · 7 options · 2 stock shafts Callaway Apex 21 discontinued 2021 · 19°–48° · 9 options Cleveland Launcher XL Halo Irons discontinued 2021 · 20°–54.5° · 9 options Cobra RADSPEED Irons discontinued 2021 · 19°–54° · 9 options Honma BERES 08 Aizu Iron discontinued 2021 · 1 option
Other Ben Hogan irons on record. Irons released in 2021 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Ben Hogan's own specs, partly built.Taken from Ben Hogan's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.7 configurations with 4 of the 7 specs an iron can publish.
- Stock shaft, built.3 stock shafts, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.