KBS shaft
The KBS C-Taper is an iron shaft in 5 flexes — it weighs 110–140 g with 1.85–1.95° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
2 distinct weight-and-torque points across 8 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
KBS rates this shaft low launch and low spin — the shading is how many of the 486 rated shafts on record share each square.
STIFFNESS BY SECTION
Neither KBS nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 8 flex options: weight, tip diameter, launch rating and spin rating on every one; torque on 2 of 8; no kick point at all.
8 rows, unsorted.
| Regular | 110 | not published | 0.355 | 0.6 | not published | low | low | 37.5″ – 41″ | 2i – 9i, PW, SW | Satin | 37.5″ – 41″ | Satin | 2i – 9i, PW, SW |
| R+ | 115 | 1.95 | 0.355 | 0.6 | not published | low | low | 37.5″ – 41″ | 2i – 9i, PW, SW | Satin | not published | not published | not published |
| Stiff | 120 | not published | 0.355 | 0.6 | not published | low | low | 37.5″ – 41″ | 2i – 9i, PW, SW | Satin | not published | not published | not published |
| S+ | 125 | 1.85 | 0.355 | 0.6 | not published | low | low | 37.5″ – 41″ | 2i – 9i, PW, SW | Satin | not published | not published | not published |
| X-Stiff | 130 | not published | 0.355 | 0.6 | not published | low | low | 37.5″ – 41″ | 2i – 9i, PW, SW | Satin | not published | not published | not published |
| Regular | 125 | not published | 0.37 | 0.6 | 43 | low | low | 43″ | 2i – 9i, PW, SW | Satin | not published | not published | not published |
| Stiff | 135 | not published | 0.37 | 0.6 | 43 | low | low | 43″ | 2i – 9i, PW, SW | Satin | not published | not published | not published |
| X-Stiff | 140 | not published | 0.37 | 0.6 | 43 | low | low | 43″ | 2i – 9i, PW, SW | Satin | not published | not published | not published |
Stock in 2 heads
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- KBS's own specs, partly built.Taken from KBS's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.8 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.