TaylorMade driver
The TaylorMade Qi35 LS Driver is a driver in 3 options from 8°–10.5°, offered with 2 stock shafts, RH and LH.
Built against the driver fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every driver in the database that publishes both of that chart's figures — every brand, not just TaylorMade.
The head half
Head option
Across every option: this club's loft from the 5th to the 70th percentile, and length at the 88th percentile.
Head: Loft against Length
The cloud is every driver head option on record that publishes both loft and length — 2,024 of them, binned by density.
The stock-shaft half
TaylorMade publishes no shaft weight or torque for any of the builds this club ships in, so there is nothing to place them against. Every stock shaft is still listed below, with whatever the maker does publish.
Specifications by option
What this record publishes. Across 3 options: loft, length and swingweight on every one.
3 rows, unsorted.
| 8 | RH | 45.75 | D4 | 460 |
| 9 | RH / LH | 45.75 | D4 | 460 |
| 10.5 | RH / LH | 45.75 | D4 | 460 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.
Stock shafts (2)
Every shaft TaylorMade lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
Mitsubishi Chemical Kai'li Blue CB Dark Wave (TaylorMade stock) made-for specs pending sources disagree 9 builds · 8°–10.5° · 3 flexes
- Flexes
- Regular, Stiff, X-Stiff
9 rows, unsorted.
| 8 | 8° | Regular | RH | 45.75 | D4 |
| 8 | 8° | Stiff | RH | 45.75 | D4 |
| 8 | 8° | X-Stiff | RH | 45.75 | D4 |
| 9 | 9° | Regular | RH / LH | 45.75 | D4 |
| 9 | 9° | Stiff | RH / LH | 45.75 | D4 |
| 9 | 9° | X-Stiff | RH / LH | 45.75 | D4 |
| 10.5 | 10.5° | Regular | RH / LH | 45.75 | D4 |
| 10.5 | 10.5° | Stiff | RH / LH | 45.75 | D4 |
| 10.5 | 10.5° | X-Stiff | RH / LH | 45.75 | D4 |
Full specs for Mitsubishi Chemical Kai'li Blue CB Dark Wave (TaylorMade stock) →
Mitsubishi Chemical Kai'li White Dark Wave (TaylorMade stock) made-for specs pending sources disagree 9 builds · 8°–10.5° · 3 flexes
- Flexes
- Regular, Stiff, X-Stiff
9 rows, unsorted.
| 8 | 8° | Regular | RH | 45.75 | D4 |
| 8 | 8° | Stiff | RH | 45.75 | D4 |
| 8 | 8° | X-Stiff | RH | 45.75 | D4 |
| 9 | 9° | Regular | RH / LH | 45.75 | D4 |
| 9 | 9° | Stiff | RH / LH | 45.75 | D4 |
| 9 | 9° | X-Stiff | RH / LH | 45.75 | D4 |
| 10.5 | 10.5° | Regular | RH / LH | 45.75 | D4 |
| 10.5 | 10.5° | Stiff | RH / LH | 45.75 | D4 |
| 10.5 | 10.5° | X-Stiff | RH / LH | 45.75 | D4 |
Full specs for Mitsubishi Chemical Kai'li White Dark Wave (TaylorMade stock) →
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:
- Stock shafts: Mitsubishi Kai'li Blue CB Dark Wave or Kai'li White Dark Wave; both made-for stock variants (see shaft stub notes) -- shaft_ref paths shown resolve under data/shafts/taylormade/.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All drivers | 2025 | Among its peers |
|---|---|---|---|---|
| Lowest published loft | 8° | =39th of 710 | =1st of 49 | =5th of 116 TaylorMade drivers · =4th of 86 low-handicap drivers |
| Widest loft range | 2.5° | =308th of 633 | =18th of 42 | =56th of 110 TaylorMade drivers · =8th of 81 low-handicap drivers |
| Longest | 45.8" | =85th of 725 | =10th of 48 | =17th of 119 TaylorMade drivers · =2nd of 84 low-handicap drivers |
player level — derived
This driver reads as built for a low-handicap player — our deterministic reading of manufacturer designation "ls" (tour / low-spin / compact line). A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Cobra DS-ADAPT LS Driver · vs Wilson DYNAPWR Carbon Driver · vs Callaway Elyte
More drivers
TaylorMade Qi35 Driver 2025 · 9°–12° · 3 options · 2 stock shafts TaylorMade Qi35 Max Driver 2025 · 9°–12° · 3 options · 2 stock shafts TaylorMade Qi35 Max Lite Driver 2025 · 10.5°–12° · 2 options · 1 stock shaft TaylorMade R7 Quad Mini Driver 2025 · 11.5°–15.5° · 3 options · 1 stock shaft Ben Hogan PTx LST Driver 2025 · 9°–10.5° · 2 options Callaway Elyte 2025 · 9°–12° · 3 options · 2 stock shafts Cobra DS-ADAPT LS Driver 2025 · 9°–10.5° · 2 options · 3 stock shafts Honma Malbon Performance Driver (Ladies) 2025 · 11.5° · 1 option
Other TaylorMade drivers on record. Drivers released in 2025 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- TaylorMade's own specs, partly built.Taken from TaylorMade's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.3 configurations with 3 of the 5 specs a driver can publish.
- Stock shaft, built.2 stock shafts, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.