TaylorMade driver
The TaylorMade Qi35 Driver is a driver in 3 options from 9°–12°, offered with 2 stock shafts, RH and LH.
Built against the driver fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every driver in the database that publishes both of that chart's figures — every brand, not just TaylorMade.
The head half
Head option
Across every option: this club's loft from the 26th to the 91st percentile, and length at the 88th percentile.
Head: Loft against Length
The cloud is every driver head option on record that publishes both loft and length — 2,024 of them, binned by density.
The stock-shaft half
TaylorMade publishes no shaft weight or torque for any of the builds this club ships in, so there is nothing to place them against. Every stock shaft is still listed below, with whatever the maker does publish.
Specifications by option
What this record publishes. Across 3 options: loft, length and swingweight on every one.
3 rows, unsorted.
| 9 | RH / LH | 45.75 | D3 | 460 |
| 10.5 | RH / LH | 45.75 | D3 | 460 |
| 12 | RH | 45.75 | D3 | 460 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.
Stock shafts (2)
Every shaft TaylorMade lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
Fujikura Ventus Blue (TaylorMade stock) made-for specs pending sources disagree 12 builds · 9°–12° · 4 flexes
- Flexes
- Regular, Senior, Stiff, X-Stiff
12 rows, unsorted.
| 9 | 9° | Regular | RH / LH | 45.75 | D3 |
| 9 | 9° | Senior | RH / LH | 45.75 | D3 |
| 9 | 9° | Stiff | RH / LH | 45.75 | D3 |
| 9 | 9° | X-Stiff | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | Regular | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | Senior | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | Stiff | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | X-Stiff | RH / LH | 45.75 | D3 |
| 12 | 12° | Regular | RH | 45.75 | D3 |
| 12 | 12° | Senior | RH | 45.75 | D3 |
| 12 | 12° | Stiff | RH | 45.75 | D3 |
| 12 | 12° | X-Stiff | RH | 45.75 | D3 |
Mitsubishi Chemical Diamana T+ 60 (TaylorMade stock) made-for specs pending sources disagree 12 builds · 9°–12° · 4 flexes
- Flexes
- Regular, Senior, Stiff, X-Stiff
12 rows, unsorted.
| 9 | 9° | Regular | RH / LH | 45.75 | D3 |
| 9 | 9° | Senior | RH / LH | 45.75 | D3 |
| 9 | 9° | Stiff | RH / LH | 45.75 | D3 |
| 9 | 9° | X-Stiff | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | Regular | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | Senior | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | Stiff | RH / LH | 45.75 | D3 |
| 10.5 | 10.5° | X-Stiff | RH / LH | 45.75 | D3 |
| 12 | 12° | Regular | RH | 45.75 | D3 |
| 12 | 12° | Senior | RH | 45.75 | D3 |
| 12 | 12° | Stiff | RH | 45.75 | D3 |
| 12 | 12° | X-Stiff | RH | 45.75 | D3 |
Full specs for Mitsubishi Chemical Diamana T+ 60 (TaylorMade stock) →
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:
- Stock shafts: Fujikura Ventus Blue or Mitsubishi Diamana T+ 60, both made-for stock variants (see shaft stub notes).
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All drivers | 2025 | Among its peers |
|---|---|---|---|---|
| Lowest published loft | 9° | =179th of 710 | =7th of 49 | =37th of 116 TaylorMade drivers · =134th of 474 mid-handicap drivers |
| Widest loft range | 3° | =145th of 633 | =4th of 42 | =28th of 110 TaylorMade drivers · =111th of 419 mid-handicap drivers |
| Longest | 45.8" | =85th of 725 | =10th of 48 | =17th of 119 TaylorMade drivers · =65th of 493 mid-handicap drivers |
player level — derived
This driver reads as built for a mid-handicap player — our deterministic reading of no tour or forgiveness designation in the manufacturer’s model name — core model. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Cobra DS-ADAPT LS Driver · vs Wilson DYNAPWR Carbon Driver · vs Callaway Elyte
More drivers
TaylorMade Qi35 LS Driver 2025 · 8°–10.5° · 3 options · 2 stock shafts TaylorMade Qi35 Max Driver 2025 · 9°–12° · 3 options · 2 stock shafts TaylorMade Qi35 Max Lite Driver 2025 · 10.5°–12° · 2 options · 1 stock shaft TaylorMade R7 Quad Mini Driver 2025 · 11.5°–15.5° · 3 options · 1 stock shaft Ben Hogan PTx LST Driver 2025 · 9°–10.5° · 2 options Callaway Elyte 2025 · 9°–12° · 3 options · 2 stock shafts Cobra DS-ADAPT LS Driver 2025 · 9°–10.5° · 2 options · 3 stock shafts Honma Malbon Performance Driver (Ladies) 2025 · 11.5° · 1 option
Other TaylorMade drivers on record. Drivers released in 2025 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- TaylorMade's own specs, partly built.Taken from TaylorMade's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.3 configurations with 3 of the 5 specs a driver can publish.
- Stock shaft, built.2 stock shafts, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.