PING iron

The PING G740 iron is an iron in 9 options from 21°–56°, offered with 11 stock shafts, RH and LH.

options

21–56

loft °

stock shafts

252

shaft × flex options

2026

released

Built against the iron fieldpublished figures only

Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on PING →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just PING.

This set's 7-iron is 28° — 11th percentile, stronger-lofted than 89% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

PING G740middle half of the field

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

PING G740 · 7-iron

LOFT · X AXIS28°: 11th percentile — stronger-lofted than 89% of the 889 sets that publish a 7-iron
LIE · Y AXIS63°: 97th percentile — more upright than 97% of the 889 sets that publish a 7-iron

7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

PING G740 · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

PING's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

PING G740middle half of the field

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

Stock shaft build

Across every build: this club's stock shafts run weight from the 21st to the 92nd percentile, and torque from the 8th to the 94th percentile.

Stock shaft: Weight against Torque

The cloud is every iron shaft variant on record that publishes both weight and torque — 1,534 of them, binned by density.

Specifications by option

What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.


21	5-iron	RH / LH	62	0.25	7.1	38.5	D0
24.5	6-iron	RH / LH	62.5	0.22	8.1	37.75	D0
28	7-iron	RH / LH	63	0.19	9.1	37	D0
32	8-iron	RH / LH	63.8	0.17	10.1	36.5	D0
36	9-iron	RH / LH	64.5	0.15	10.5	36	D0.5
40	PW	RH / LH	65	0.13	11.1	35.5	D2
45	UW	RH / LH	65	0.12	12	35.5	D2
50	50°	RH / LH	65	0.08	12	35.5	D2
56	56°	RH / LH	65.3	0.08	12	35.25	D3

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means PING did not publish that figure — we don't estimate.

Stock shafts (11)

Every shaft PING lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

KBS Tour aftermarket upcharge 27 builds · 21°–56° · 3 flexes · 110–130 g

Weight: 110–130 g
Launch: mid
Flexes: Regular, Stiff, X-Stiff


21	5-iron	Regular	RH / LH	110	62	38.5	D0
21	5-iron	Stiff	RH / LH	120	62	38.5	D0
21	5-iron	X-Stiff	RH / LH	130	62	38.5	D0
24.5	6-iron	Regular	RH / LH	110	62.5	37.75	D0
24.5	6-iron	Stiff	RH / LH	120	62.5	37.75	D0
24.5	6-iron	X-Stiff	RH / LH	130	62.5	37.75	D0
28	7-iron	Regular	RH / LH	110	63	37	D0
28	7-iron	Stiff	RH / LH	120	63	37	D0
28	7-iron	X-Stiff	RH / LH	130	63	37	D0
32	8-iron	Regular	RH / LH	110	63.8	36.5	D0
32	8-iron	Stiff	RH / LH	120	63.8	36.5	D0
32	8-iron	X-Stiff	RH / LH	130	63.8	36.5	D0
36	9-iron	Regular	RH / LH	110	64.5	36	D0.5
36	9-iron	Stiff	RH / LH	120	64.5	36	D0.5
36	9-iron	X-Stiff	RH / LH	130	64.5	36	D0.5
40	PW	Regular	RH / LH	110	65	35.5	D2
40	PW	Stiff	RH / LH	120	65	35.5	D2
40	PW	X-Stiff	RH / LH	130	65	35.5	D2
45	UW	Regular	RH / LH	110	65	35.5	D2
45	UW	Stiff	RH / LH	120	65	35.5	D2
45	UW	X-Stiff	RH / LH	130	65	35.5	D2
50	50°	Regular	RH / LH	110	65	35.5	D2
50	50°	Stiff	RH / LH	120	65	35.5	D2
50	50°	X-Stiff	RH / LH	130	65	35.5	D2
56	56°	Regular	RH / LH	110	65.3	35.25	D3
56	56°	Stiff	RH / LH	120	65.3	35.25	D3
56	56°	X-Stiff	RH / LH	130	65.3	35.25	D3

Full specs for KBS Tour →

Nippon Shaft N.S.PRO MODUS3 Tour 105 aftermarket upcharge 27 builds · 21°–56° · 3 flexes · 103–112 g · 1.6–1.9° · high kick

Weight: 103–112 g
Torque: 1.6–1.9°
Kick point: high
Launch: mid
Flexes: Regular, Stiff, X-Stiff


21	5-iron	Regular	RH / LH	103	1.9	62	38.5	D0
21	5-iron	Stiff	RH / LH	106.5	1.7	62	38.5	D0
21	5-iron	X-Stiff	RH / LH	112	1.6	62	38.5	D0
24.5	6-iron	Regular	RH / LH	103	1.9	62.5	37.75	D0
24.5	6-iron	Stiff	RH / LH	106.5	1.7	62.5	37.75	D0
24.5	6-iron	X-Stiff	RH / LH	112	1.6	62.5	37.75	D0
28	7-iron	Regular	RH / LH	103	1.9	63	37	D0
28	7-iron	Stiff	RH / LH	106.5	1.7	63	37	D0
28	7-iron	X-Stiff	RH / LH	112	1.6	63	37	D0
32	8-iron	Regular	RH / LH	103	1.9	63.8	36.5	D0
32	8-iron	Stiff	RH / LH	106.5	1.7	63.8	36.5	D0
32	8-iron	X-Stiff	RH / LH	112	1.6	63.8	36.5	D0
36	9-iron	Regular	RH / LH	103	1.9	64.5	36	D0.5
36	9-iron	Stiff	RH / LH	106.5	1.7	64.5	36	D0.5
36	9-iron	X-Stiff	RH / LH	112	1.6	64.5	36	D0.5
40	PW	Regular	RH / LH	103	1.9	65	35.5	D2
40	PW	Stiff	RH / LH	106.5	1.7	65	35.5	D2
40	PW	X-Stiff	RH / LH	112	1.6	65	35.5	D2
45	UW	Regular	RH / LH	103	1.9	65	35.5	D2
45	UW	Stiff	RH / LH	106.5	1.7	65	35.5	D2
45	UW	X-Stiff	RH / LH	112	1.6	65	35.5	D2
50	50°	Regular	RH / LH	103	1.9	65	35.5	D2
50	50°	Stiff	RH / LH	106.5	1.7	65	35.5	D2
50	50°	X-Stiff	RH / LH	112	1.6	65	35.5	D2
56	56°	Regular	RH / LH	103	1.9	65.3	35.25	D3
56	56°	Stiff	RH / LH	106.5	1.7	65.3	35.25	D3
56	56°	X-Stiff	RH / LH	112	1.6	65.3	35.25	D3

Full specs for Nippon Shaft N.S.PRO MODUS3 Tour 105 →

Nippon Shaft N.S.PRO MODUS3 Tour 115 aftermarket upcharge 27 builds · 21°–56° · 3 flexes · 117.5–119.5 g · 1.5–1.7° · high kick

Weight: 117.5–119.5 g
Torque: 1.5–1.7°
Kick point: high
Launch: mid
Flexes: Regular, Stiff, X-Stiff


21	5-iron	Regular	RH / LH	117.5	1.7	62	38.5	D0
21	5-iron	Stiff	RH / LH	118.5	1.6	62	38.5	D0
21	5-iron	X-Stiff	RH / LH	119.5	1.5	62	38.5	D0
24.5	6-iron	Regular	RH / LH	117.5	1.7	62.5	37.75	D0
24.5	6-iron	Stiff	RH / LH	118.5	1.6	62.5	37.75	D0
24.5	6-iron	X-Stiff	RH / LH	119.5	1.5	62.5	37.75	D0
28	7-iron	Regular	RH / LH	117.5	1.7	63	37	D0
28	7-iron	Stiff	RH / LH	118.5	1.6	63	37	D0
28	7-iron	X-Stiff	RH / LH	119.5	1.5	63	37	D0
32	8-iron	Regular	RH / LH	117.5	1.7	63.8	36.5	D0
32	8-iron	Stiff	RH / LH	118.5	1.6	63.8	36.5	D0
32	8-iron	X-Stiff	RH / LH	119.5	1.5	63.8	36.5	D0
36	9-iron	Regular	RH / LH	117.5	1.7	64.5	36	D0.5
36	9-iron	Stiff	RH / LH	118.5	1.6	64.5	36	D0.5
36	9-iron	X-Stiff	RH / LH	119.5	1.5	64.5	36	D0.5
40	PW	Regular	RH / LH	117.5	1.7	65	35.5	D2
40	PW	Stiff	RH / LH	118.5	1.6	65	35.5	D2
40	PW	X-Stiff	RH / LH	119.5	1.5	65	35.5	D2
45	UW	Regular	RH / LH	117.5	1.7	65	35.5	D2
45	UW	Stiff	RH / LH	118.5	1.6	65	35.5	D2
45	UW	X-Stiff	RH / LH	119.5	1.5	65	35.5	D2
50	50°	Regular	RH / LH	117.5	1.7	65	35.5	D2
50	50°	Stiff	RH / LH	118.5	1.6	65	35.5	D2
50	50°	X-Stiff	RH / LH	119.5	1.5	65	35.5	D2
56	56°	Regular	RH / LH	117.5	1.7	65.3	35.25	D3
56	56°	Stiff	RH / LH	118.5	1.6	65.3	35.25	D3
56	56°	X-Stiff	RH / LH	119.5	1.5	65.3	35.25	D3

Full specs for Nippon Shaft N.S.PRO MODUS3 Tour 115 →

PING ALTA CB Blue aftermarket specs pending 27 builds · 21°–56° · 3 flexes · 65–82 g

Weight: 65–82 g
Launch: high
Flexes: Soft Regular, Regular, Stiff


21	5-iron	Soft Regular	RH / LH	65	62	38.5	D0
21	5-iron	Regular	RH / LH	72	62	38.5	D0
21	5-iron	Stiff	RH / LH	82	62	38.5	D0
24.5	6-iron	Soft Regular	RH / LH	65	62.5	37.75	D0
24.5	6-iron	Regular	RH / LH	72	62.5	37.75	D0
24.5	6-iron	Stiff	RH / LH	82	62.5	37.75	D0
28	7-iron	Soft Regular	RH / LH	65	63	37	D0
28	7-iron	Regular	RH / LH	72	63	37	D0
28	7-iron	Stiff	RH / LH	82	63	37	D0
32	8-iron	Soft Regular	RH / LH	65	63.8	36.5	D0
32	8-iron	Regular	RH / LH	72	63.8	36.5	D0
32	8-iron	Stiff	RH / LH	82	63.8	36.5	D0
36	9-iron	Soft Regular	RH / LH	65	64.5	36	D0.5
36	9-iron	Regular	RH / LH	72	64.5	36	D0.5
36	9-iron	Stiff	RH / LH	82	64.5	36	D0.5
40	PW	Soft Regular	RH / LH	65	65	35.5	D2
40	PW	Regular	RH / LH	72	65	35.5	D2
40	PW	Stiff	RH / LH	82	65	35.5	D2
45	UW	Soft Regular	RH / LH	65	65	35.5	D2
45	UW	Regular	RH / LH	72	65	35.5	D2
45	UW	Stiff	RH / LH	82	65	35.5	D2
50	50°	Soft Regular	RH / LH	65	65	35.5	D2
50	50°	Regular	RH / LH	72	65	35.5	D2
50	50°	Stiff	RH / LH	82	65	35.5	D2
56	56°	Soft Regular	RH / LH	65	65.3	35.25	D3
56	56°	Regular	RH / LH	72	65.3	35.25	D3
56	56°	Stiff	RH / LH	82	65.3	35.25	D3

Full specs for PING ALTA CB Blue →

PING ALTA Quick aftermarket specs pending 18 builds · 21°–56° · 2 flexes · 38–45 g

Weight: 38–45 g
Launch: high
Flexes: 35, 45


21	5-iron	35	RH / LH	38	62	38.5	D0
21	5-iron	45	RH / LH	45	62	38.5	D0
24.5	6-iron	35	RH / LH	38	62.5	37.75	D0
24.5	6-iron	45	RH / LH	45	62.5	37.75	D0
28	7-iron	35	RH / LH	38	63	37	D0
28	7-iron	45	RH / LH	45	63	37	D0
32	8-iron	35	RH / LH	38	63.8	36.5	D0
32	8-iron	45	RH / LH	45	63.8	36.5	D0
36	9-iron	35	RH / LH	38	64.5	36	D0.5
36	9-iron	45	RH / LH	45	64.5	36	D0.5
40	PW	35	RH / LH	38	65	35.5	D2
40	PW	45	RH / LH	45	65	35.5	D2
45	UW	35	RH / LH	38	65	35.5	D2
45	UW	45	RH / LH	45	65	35.5	D2
50	50°	35	RH / LH	38	65	35.5	D2
50	50°	45	RH / LH	45	65	35.5	D2
56	56°	35	RH / LH	38	65.3	35.25	D3
56	56°	45	RH / LH	45	65.3	35.25	D3

Full specs for PING ALTA Quick →

PING AWT 3.0 aftermarket specs pending 27 builds · 21°–56° · 3 flexes · 96–114 g

Weight: 96–114 g
Launch: mid
Flexes: Regular, Stiff, X-Stiff


21	5-iron	Regular	RH / LH	96	62	38.5	D0
21	5-iron	Stiff	RH / LH	102	62	38.5	D0
21	5-iron	X-Stiff	RH / LH	114	62	38.5	D0
24.5	6-iron	Regular	RH / LH	96	62.5	37.75	D0
24.5	6-iron	Stiff	RH / LH	102	62.5	37.75	D0
24.5	6-iron	X-Stiff	RH / LH	114	62.5	37.75	D0
28	7-iron	Regular	RH / LH	96	63	37	D0
28	7-iron	Stiff	RH / LH	102	63	37	D0
28	7-iron	X-Stiff	RH / LH	114	63	37	D0
32	8-iron	Regular	RH / LH	96	63.8	36.5	D0
32	8-iron	Stiff	RH / LH	102	63.8	36.5	D0
32	8-iron	X-Stiff	RH / LH	114	63.8	36.5	D0
36	9-iron	Regular	RH / LH	96	64.5	36	D0.5
36	9-iron	Stiff	RH / LH	102	64.5	36	D0.5
36	9-iron	X-Stiff	RH / LH	114	64.5	36	D0.5
40	PW	Regular	RH / LH	96	65	35.5	D2
40	PW	Stiff	RH / LH	102	65	35.5	D2
40	PW	X-Stiff	RH / LH	114	65	35.5	D2
45	UW	Regular	RH / LH	96	65	35.5	D2
45	UW	Stiff	RH / LH	102	65	35.5	D2
45	UW	X-Stiff	RH / LH	114	65	35.5	D2
50	50°	Regular	RH / LH	96	65	35.5	D2
50	50°	Stiff	RH / LH	102	65	35.5	D2
50	50°	X-Stiff	RH / LH	114	65	35.5	D2
56	56°	Regular	RH / LH	96	65.3	35.25	D3
56	56°	Stiff	RH / LH	102	65.3	35.25	D3
56	56°	X-Stiff	RH / LH	114	65.3	35.25	D3

Full specs for PING AWT 3.0 →

True Temper Dynamic Gold aftermarket upcharge 18 builds · 21°–56° · 2 flexes · 130 g

Weight: 130 g
Flexes: S300, X100


21	5-iron	S300	RH / LH	130	62	38.5	D0
21	5-iron	X100	RH / LH	130	62	38.5	D0
24.5	6-iron	S300	RH / LH	130	62.5	37.75	D0
24.5	6-iron	X100	RH / LH	130	62.5	37.75	D0
28	7-iron	S300	RH / LH	130	63	37	D0
28	7-iron	X100	RH / LH	130	63	37	D0
32	8-iron	S300	RH / LH	130	63.8	36.5	D0
32	8-iron	X100	RH / LH	130	63.8	36.5	D0
36	9-iron	S300	RH / LH	130	64.5	36	D0.5
36	9-iron	X100	RH / LH	130	64.5	36	D0.5
40	PW	S300	RH / LH	130	65	35.5	D2
40	PW	X100	RH / LH	130	65	35.5	D2
45	UW	S300	RH / LH	130	65	35.5	D2
45	UW	X100	RH / LH	130	65	35.5	D2
50	50°	S300	RH / LH	130	65	35.5	D2
50	50°	X100	RH / LH	130	65	35.5	D2
56	56°	S300	RH / LH	130	65.3	35.25	D3
56	56°	X100	RH / LH	130	65.3	35.25	D3

Full specs for True Temper Dynamic Gold →

True Temper Dynamic Gold 120 aftermarket upcharge 18 builds · 21°–56° · 2 flexes · 118–120 g

Weight: 118–120 g
Flexes: S300, X100


21	5-iron	S300	RH / LH	118	62	38.5	D0
21	5-iron	X100	RH / LH	120	62	38.5	D0
24.5	6-iron	S300	RH / LH	118	62.5	37.75	D0
24.5	6-iron	X100	RH / LH	120	62.5	37.75	D0
28	7-iron	S300	RH / LH	118	63	37	D0
28	7-iron	X100	RH / LH	120	63	37	D0
32	8-iron	S300	RH / LH	118	63.8	36.5	D0
32	8-iron	X100	RH / LH	120	63.8	36.5	D0
36	9-iron	S300	RH / LH	118	64.5	36	D0.5
36	9-iron	X100	RH / LH	120	64.5	36	D0.5
40	PW	S300	RH / LH	118	65	35.5	D2
40	PW	X100	RH / LH	120	65	35.5	D2
45	UW	S300	RH / LH	118	65	35.5	D2
45	UW	X100	RH / LH	120	65	35.5	D2
50	50°	S300	RH / LH	118	65	35.5	D2
50	50°	X100	RH / LH	120	65	35.5	D2
56	56°	S300	RH / LH	118	65.3	35.25	D3
56	56°	X100	RH / LH	120	65.3	35.25	D3

Full specs for True Temper Dynamic Gold 120 →

True Temper Dynamic Gold Mid 100 aftermarket 18 builds · 21°–56° · 2 flexes · 105–106 g

Weight: 105–106 g
Flexes: R300, S300


21	5-iron	R300	RH / LH	105	62	38.5	D0
21	5-iron	S300	RH / LH	106	62	38.5	D0
24.5	6-iron	R300	RH / LH	105	62.5	37.75	D0
24.5	6-iron	S300	RH / LH	106	62.5	37.75	D0
28	7-iron	R300	RH / LH	105	63	37	D0
28	7-iron	S300	RH / LH	106	63	37	D0
32	8-iron	R300	RH / LH	105	63.8	36.5	D0
32	8-iron	S300	RH / LH	106	63.8	36.5	D0
36	9-iron	R300	RH / LH	105	64.5	36	D0.5
36	9-iron	S300	RH / LH	106	64.5	36	D0.5
40	PW	R300	RH / LH	105	65	35.5	D2
40	PW	S300	RH / LH	106	65	35.5	D2
45	UW	R300	RH / LH	105	65	35.5	D2
45	UW	S300	RH / LH	106	65	35.5	D2
50	50°	R300	RH / LH	105	65	35.5	D2
50	50°	S300	RH / LH	106	65	35.5	D2
56	56°	R300	RH / LH	105	65.3	35.25	D3
56	56°	S300	RH / LH	106	65.3	35.25	D3

Full specs for True Temper Dynamic Gold Mid 100 →

True Temper Elevate 95 aftermarket upcharge 18 builds · 21°–56° · 2 flexes · 100–101 g

Weight: 100–101 g
Flexes: Regular, Stiff


21	5-iron	Regular	RH / LH	100	62	38.5	D0
21	5-iron	Stiff	RH / LH	101	62	38.5	D0
24.5	6-iron	Regular	RH / LH	100	62.5	37.75	D0
24.5	6-iron	Stiff	RH / LH	101	62.5	37.75	D0
28	7-iron	Regular	RH / LH	100	63	37	D0
28	7-iron	Stiff	RH / LH	101	63	37	D0
32	8-iron	Regular	RH / LH	100	63.8	36.5	D0
32	8-iron	Stiff	RH / LH	101	63.8	36.5	D0
36	9-iron	Regular	RH / LH	100	64.5	36	D0.5
36	9-iron	Stiff	RH / LH	101	64.5	36	D0.5
40	PW	Regular	RH / LH	100	65	35.5	D2
40	PW	Stiff	RH / LH	101	65	35.5	D2
45	UW	Regular	RH / LH	100	65	35.5	D2
45	UW	Stiff	RH / LH	101	65	35.5	D2
50	50°	Regular	RH / LH	100	65	35.5	D2
50	50°	Stiff	RH / LH	101	65	35.5	D2
56	56°	Regular	RH / LH	100	65.3	35.25	D3
56	56°	Stiff	RH / LH	101	65.3	35.25	D3

Full specs for True Temper Elevate 95 →

UST Mamiya Recoil DART 55/65/75 aftermarket upcharge 27 builds · 21°–56° · 3 flexes · 61–78 g · 3.9–5.2°

Weight: 61–78 g
Torque: 3.9–5.2°
Launch: mid
Flexes: 65A (F2), 75R (F3), 75S (F4)


21	5-iron	65A (F2)	RH / LH	61	5.2	62	38.5	D0
21	5-iron	75R (F3)	RH / LH	72	3.9	62	38.5	D0
21	5-iron	75S (F4)	RH / LH	78	3.9	62	38.5	D0
24.5	6-iron	65A (F2)	RH / LH	61	5.2	62.5	37.75	D0
24.5	6-iron	75R (F3)	RH / LH	72	3.9	62.5	37.75	D0
24.5	6-iron	75S (F4)	RH / LH	78	3.9	62.5	37.75	D0
28	7-iron	65A (F2)	RH / LH	61	5.2	63	37	D0
28	7-iron	75R (F3)	RH / LH	72	3.9	63	37	D0
28	7-iron	75S (F4)	RH / LH	78	3.9	63	37	D0
32	8-iron	65A (F2)	RH / LH	61	5.2	63.8	36.5	D0
32	8-iron	75R (F3)	RH / LH	72	3.9	63.8	36.5	D0
32	8-iron	75S (F4)	RH / LH	78	3.9	63.8	36.5	D0
36	9-iron	65A (F2)	RH / LH	61	5.2	64.5	36	D0.5
36	9-iron	75R (F3)	RH / LH	72	3.9	64.5	36	D0.5
36	9-iron	75S (F4)	RH / LH	78	3.9	64.5	36	D0.5
40	PW	65A (F2)	RH / LH	61	5.2	65	35.5	D2
40	PW	75R (F3)	RH / LH	72	3.9	65	35.5	D2
40	PW	75S (F4)	RH / LH	78	3.9	65	35.5	D2
45	UW	65A (F2)	RH / LH	61	5.2	65	35.5	D2
45	UW	75R (F3)	RH / LH	72	3.9	65	35.5	D2
45	UW	75S (F4)	RH / LH	78	3.9	65	35.5	D2
50	50°	65A (F2)	RH / LH	61	5.2	65	35.5	D2
50	50°	75R (F3)	RH / LH	72	3.9	65	35.5	D2
50	50°	75S (F4)	RH / LH	78	3.9	65	35.5	D2
56	56°	65A (F2)	RH / LH	61	5.2	65.3	35.25	D3
56	56°	75R (F3)	RH / LH	72	3.9	65.3	35.25	D3
56	56°	75S (F4)	RH / LH	78	3.9	65.3	35.25	D3

Full specs for UST Mamiya Recoil DART 55/65/75 →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

Figure	Published	All irons	2026	Among its peers
Strongest-lofted 7-iron	28°	=70th of 953	=6th of 56	=1st of 68 PING irons · =70th of 208 high-handicap irons
Most offset at the 7-iron	0.19"	=59th of 583	=3rd of 47	=19th of 54 PING irons · =47th of 155 high-handicap irons
Widest loft range	35°	=325th of 1,104	=6th of 57	=34th of 71 PING irons · =80th of 208 high-handicap irons
Most upright lie	63°	=33rd of 941	=5th of 56	=8th of 66 PING irons · =20th of 203 high-handicap irons
Longest	37"	=265th of 894	=30th of 53	=1st of 64 PING irons · =110th of 201 high-handicap irons

player level — derived

This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.19", 7-iron loft 28°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs Honma BERES 10 3-Star Iron · vs Cobra COBRA 3DP MB Irons · vs Wilson DYNAPWR Forged Steel Irons

More irons

PING G Le4 2026 · 22°–56° · 8 options · 1 stock shaft PING G740 Midnight Black Irons 2026 · 21°–56° · 9 options PING i540 2026 · 19°–47° · 8 options · 11 stock shafts PING Womens G Le4 Irons 2026 · 25°–56° · 7 options Callaway Quantum Max 2026 · 19°–55° · 10 options · 3 stock shafts Cobra BAFFLER Irons 2026 · 21°–56° · 9 options Honma BERES 10 3-Star Iron 2026 · 21°–55° · 9 options · 1 stock shaft Miura LC-930 2026 · 22°–48° · 8 options

Other PING irons on record. Irons released in 2026 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

PING's own specs, partly built.Taken from PING's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
Published options, built.9 configurations with 6 of the 7 specs an iron can publish.
Stock shaft, built.11 stock shafts, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 4 fields we don't hold — or tell us something here is wrong