Tour Edge iron
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Tour Edge.
This set's 7-iron is 32° — 60th percentile, weaker-lofted than 60% of the 889 sets that publish one. The median is 32°.
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Tour Edge Exotics CB Irons · 7
- LOFT · X AXIS32°
- 60th percentile — weaker-lofted than 60% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62°
- 44th percentile — flatter than 56% of the 889 sets that publish a 7-iron
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Tour Edge Exotics CB Irons · 7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Tour Edge's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Across every build: this club's stock shafts run weight at the 63rd percentile, and torque from the 36th to the 39th percentile.
The cloud is every iron shaft variant on record that publishes both weight and torque — 1,534 of them, binned by density.
Specifications by option
What this record publishes. Across 9 options: loft, lie and length on every one.
9 rows, unsorted, collapsed — use the button below the table to show every option.
| 22 | 4 | 60.5 | 0.091 | 4 | 38.5 |
| 25 | 5 | 61 | 0.091 | 4 | 38 |
| 28 | 6 | 61.5 | 0.091 | 7 | 37.5 |
| 32 | 7 | 62 | 0.091 | 7 | 37 |
| 36 | 8 | 62.5 | 0.091 | 7 | 36.5 |
| 41 | 9 | 63 | 0.091 | 7 | 36 |
| 46 | PW | 63.5 | 0.091 | 9 | 35.75 |
| 50 | AW | 64 | 0.091 | 10 | 35.5 |
| 20 | 3 | 60 | 0.091 | 3 | 39 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Tour Edge did not publish that figure — we don't estimate.
Tour Edge publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps Tour Edge's own figure verbatim.
Stock shafts (3)
Every shaft Tour Edge lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
True Temper Dynamic Gold Mid 100 aftermarket 18 builds · 20°–50° · 2 flexes · 105–106 g
- Weight
- 105–106 g
- Flexes
- R, S
18 rows, unsorted.
| 20 | 3 | R | 105 | 60 | 39 |
| 20 | 3 | S | 106 | 60 | 39 |
| 22 | 4 | R | 105 | 60.5 | 38.5 |
| 22 | 4 | S | 106 | 60.5 | 38.5 |
| 25 | 5 | R | 105 | 61 | 38 |
| 25 | 5 | S | 106 | 61 | 38 |
| 28 | 6 | R | 105 | 61.5 | 37.5 |
| 28 | 6 | S | 106 | 61.5 | 37.5 |
| 32 | 7 | R | 105 | 62 | 37 |
| 32 | 7 | S | 106 | 62 | 37 |
| 36 | 8 | R | 105 | 62.5 | 36.5 |
| 36 | 8 | S | 106 | 62.5 | 36.5 |
| 41 | 9 | R | 105 | 63 | 36 |
| 41 | 9 | S | 106 | 63 | 36 |
| 46 | PW | R | 105 | 63.5 | 35.75 |
| 46 | PW | S | 106 | 63.5 | 35.75 |
| 50 | AW | R | 105 | 64 | 35.5 |
| 50 | AW | S | 106 | 64 | 35.5 |
True Temper Dynamic Gold Mid 115 aftermarket 18 builds · 20°–50° · 2 flexes · 115–116 g
- Weight
- 115–116 g
- Flexes
- S, X
18 rows, unsorted.
| 20 | 3 | S | 115 | 60 | 39 |
| 20 | 3 | X | 116 | 60 | 39 |
| 22 | 4 | S | 115 | 60.5 | 38.5 |
| 22 | 4 | X | 116 | 60.5 | 38.5 |
| 25 | 5 | S | 115 | 61 | 38 |
| 25 | 5 | X | 116 | 61 | 38 |
| 28 | 6 | S | 115 | 61.5 | 37.5 |
| 28 | 6 | X | 116 | 61.5 | 37.5 |
| 32 | 7 | S | 115 | 62 | 37 |
| 32 | 7 | X | 116 | 62 | 37 |
| 36 | 8 | S | 115 | 62.5 | 36.5 |
| 36 | 8 | X | 116 | 62.5 | 36.5 |
| 41 | 9 | S | 115 | 63 | 36 |
| 41 | 9 | X | 116 | 63 | 36 |
| 46 | PW | S | 115 | 63.5 | 35.75 |
| 46 | PW | X | 116 | 63.5 | 35.75 |
| 50 | AW | S | 115 | 64 | 35.5 |
| 50 | AW | X | 116 | 64 | 35.5 |
UST Mamiya Recoil DART 90/105 aftermarket 18 builds · 20°–50° · 2 flexes · 90 g · 2.5–2.6°
- Weight
- 90 g
- Torque
- 2.5–2.6°
- Launch
- mid
- Flexes
- R, S
18 rows, unsorted.
| 20 | 3 | R | 90 | 2.6 | 60 | 39 |
| 20 | 3 | S | 90 | 2.5 | 60 | 39 |
| 22 | 4 | R | 90 | 2.6 | 60.5 | 38.5 |
| 22 | 4 | S | 90 | 2.5 | 60.5 | 38.5 |
| 25 | 5 | R | 90 | 2.6 | 61 | 38 |
| 25 | 5 | S | 90 | 2.5 | 61 | 38 |
| 28 | 6 | R | 90 | 2.6 | 61.5 | 37.5 |
| 28 | 6 | S | 90 | 2.5 | 61.5 | 37.5 |
| 32 | 7 | R | 90 | 2.6 | 62 | 37 |
| 32 | 7 | S | 90 | 2.5 | 62 | 37 |
| 36 | 8 | R | 90 | 2.6 | 62.5 | 36.5 |
| 36 | 8 | S | 90 | 2.5 | 62.5 | 36.5 |
| 41 | 9 | R | 90 | 2.6 | 63 | 36 |
| 41 | 9 | S | 90 | 2.5 | 63 | 36 |
| 46 | PW | R | 90 | 2.6 | 63.5 | 35.75 |
| 46 | PW | S | 90 | 2.5 | 63.5 | 35.75 |
| 50 | AW | R | 90 | 2.6 | 64 | 35.5 |
| 50 | AW | S | 90 | 2.5 | 64 | 35.5 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2026 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 32° | =438th of 953 | =39th of 56 | =43rd of 120 Tour Edge irons · =48th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.091" | =476th of 583 | =34th of 47 | =16th of 20 Tour Edge irons · =176th of 283 low-handicap irons |
| Widest loft range | 30° | =552nd of 1,104 | =25th of 57 | =142nd of 204 Tour Edge irons · =191st of 508 low-handicap irons |
| Most upright lie | 62° | =539th of 941 | =35th of 56 | =101st of 119 Tour Edge irons · =264th of 505 low-handicap irons |
| Longest | 37" | =265th of 894 | =30th of 53 | =65th of 107 Tour Edge irons · =83rd of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.091", 7-iron loft 32°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Honma BERES 10 3-Star Iron · vs Cobra COBRA 3DP MB Irons · vs Wilson DYNAPWR Forged Steel Irons
More irons
Other Tour Edge irons on record. Irons released in 2026 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
2 of 3 parts of this club page are built, and we're filling in the rest.
- Tour Edge's own specs, partly built.Taken from Tour Edge's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.9 configurations with 5 of the 7 specs an iron can publish.
- Stock shaft, built.3 stock shafts, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.