Tour Edge iron
The Tour Edge Exotics C725 Irons is an iron in 8 options from 21°–49°, offered with 3 stock shafts, RH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Tour Edge.
This set's 7-iron is 30° — 31st percentile, stronger-lofted than 69% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Tour Edge Exotics C725 Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Tour Edge Exotics C725 Irons · 7
- LOFT · X AXIS30°
- 31st percentile — stronger-lofted than 69% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Tour Edge Exotics C725 Irons · 7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Tour Edge's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Tour Edge Exotics C725 Ironsmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight at the 47th percentile, and torque at the 61st percentile.
Stock shaft: Weight against Torque
The cloud is every iron shaft variant on record that publishes both weight and torque — 1,534 of them, binned by density.
Specifications by option
What this record publishes. Across 8 options: loft, lie and length on every one.
8 rows, unsorted.
| 21 | 4 | 61 | 0.142 | 38.75 |
| 23 | 5 | 61.5 | 0.13 | 38.25 |
| 26.5 | 6 | 62 | 0.118 | 37.75 |
| 30 | 7 | 62.5 | 0.106 | 37.25 |
| 34 | 8 | 63 | 0.094 | 36.75 |
| 39 | 9 | 63.5 | 0.083 | 36.25 |
| 44 | PW | 64 | 0.071 | 35.75 |
| 49 | AW | 64 | 0.059 | 35.5 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Tour Edge did not publish that figure — we don't estimate.
Tour Edge publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps Tour Edge's own figure verbatim.
Stock shafts (3)
Every shaft Tour Edge lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
True Temper Denali Blue (Tour Edge Stock) made-for 24 builds · 21°–49° · 3 flexes · 80 g · 3.2°
- Weight
- 80 g
- Torque
- 3.2°
- Launch
- mid
- Spin
- mid
- Flexes
- R, S, X
24 rows, unsorted.
| 21 | 4 | R | 80 | 3.2 | 61 | 38.75 |
| 21 | 4 | S | 80 | 3.2 | 61 | 38.75 |
| 21 | 4 | X | 80 | 3.2 | 61 | 38.75 |
| 23 | 5 | R | 80 | 3.2 | 61.5 | 38.25 |
| 23 | 5 | S | 80 | 3.2 | 61.5 | 38.25 |
| 23 | 5 | X | 80 | 3.2 | 61.5 | 38.25 |
| 26.5 | 6 | R | 80 | 3.2 | 62 | 37.75 |
| 26.5 | 6 | S | 80 | 3.2 | 62 | 37.75 |
| 26.5 | 6 | X | 80 | 3.2 | 62 | 37.75 |
| 30 | 7 | R | 80 | 3.2 | 62.5 | 37.25 |
| 30 | 7 | S | 80 | 3.2 | 62.5 | 37.25 |
| 30 | 7 | X | 80 | 3.2 | 62.5 | 37.25 |
| 34 | 8 | R | 80 | 3.2 | 63 | 36.75 |
| 34 | 8 | S | 80 | 3.2 | 63 | 36.75 |
| 34 | 8 | X | 80 | 3.2 | 63 | 36.75 |
| 39 | 9 | R | 80 | 3.2 | 63.5 | 36.25 |
| 39 | 9 | S | 80 | 3.2 | 63.5 | 36.25 |
| 39 | 9 | X | 80 | 3.2 | 63.5 | 36.25 |
| 44 | PW | R | 80 | 3.2 | 64 | 35.75 |
| 44 | PW | S | 80 | 3.2 | 64 | 35.75 |
| 44 | PW | X | 80 | 3.2 | 64 | 35.75 |
| 49 | AW | R | 80 | 3.2 | 64 | 35.5 |
| 49 | AW | S | 80 | 3.2 | 64 | 35.5 |
| 49 | AW | X | 80 | 3.2 | 64 | 35.5 |
True Temper Dynamic Gold Mid 100 aftermarket 16 builds · 21°–49° · 2 flexes · 105–106 g
- Weight
- 105–106 g
- Flexes
- R, S
16 rows, unsorted.
| 21 | 4 | R | 105 | 61 | 38.75 |
| 21 | 4 | S | 106 | 61 | 38.75 |
| 23 | 5 | R | 105 | 61.5 | 38.25 |
| 23 | 5 | S | 106 | 61.5 | 38.25 |
| 26.5 | 6 | R | 105 | 62 | 37.75 |
| 26.5 | 6 | S | 106 | 62 | 37.75 |
| 30 | 7 | R | 105 | 62.5 | 37.25 |
| 30 | 7 | S | 106 | 62.5 | 37.25 |
| 34 | 8 | R | 105 | 63 | 36.75 |
| 34 | 8 | S | 106 | 63 | 36.75 |
| 39 | 9 | R | 105 | 63.5 | 36.25 |
| 39 | 9 | S | 106 | 63.5 | 36.25 |
| 44 | PW | R | 105 | 64 | 35.75 |
| 44 | PW | S | 106 | 64 | 35.75 |
| 49 | AW | R | 105 | 64 | 35.5 |
| 49 | AW | S | 106 | 64 | 35.5 |
True Temper Dynamic Gold Mid 115 aftermarket 16 builds · 21°–49° · 2 flexes · 115–116 g
- Weight
- 115–116 g
- Flexes
- S, X
16 rows, unsorted.
| 21 | 4 | S | 115 | 61 | 38.75 |
| 21 | 4 | X | 116 | 61 | 38.75 |
| 23 | 5 | S | 115 | 61.5 | 38.25 |
| 23 | 5 | X | 116 | 61.5 | 38.25 |
| 26.5 | 6 | S | 115 | 62 | 37.75 |
| 26.5 | 6 | X | 116 | 62 | 37.75 |
| 30 | 7 | S | 115 | 62.5 | 37.25 |
| 30 | 7 | X | 116 | 62.5 | 37.25 |
| 34 | 8 | S | 115 | 63 | 36.75 |
| 34 | 8 | X | 116 | 63 | 36.75 |
| 39 | 9 | S | 115 | 63.5 | 36.25 |
| 39 | 9 | X | 116 | 63.5 | 36.25 |
| 44 | PW | S | 115 | 64 | 35.75 |
| 44 | PW | X | 116 | 64 | 35.75 |
| 49 | AW | S | 115 | 64 | 35.5 |
| 49 | AW | X | 116 | 64 | 35.5 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2025 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 30° | =189th of 953 | =24th of 61 | =23rd of 120 Tour Edge irons · =8th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.106" | =370th of 583 | =35th of 50 | =13th of 20 Tour Edge irons · =70th of 283 low-handicap irons |
| Widest loft range | 28° | =719th of 1,104 | =46th of 68 | =154th of 204 Tour Edge irons · =304th of 508 low-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | =11th of 61 | =5th of 119 Tour Edge irons · =88th of 505 low-handicap irons |
| Longest | 37.3" | =49th of 894 | =8th of 60 | =1st of 107 Tour Edge irons · =8th of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.106", 7-iron loft 30°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Cobra 3DP Tour Irons · vs Callaway Apex Ai150 · vs Wilson DYNAPWR Irons
More irons
Tour Edge Exotics E725 Irons 2025 · 19°–56° · 10 options · 2 stock shafts Tour Edge Exotics Max Irons 2025 · 19°–56° · 10 options · 4 stock shafts Tour Edge Exotics MB Irons 2025 · 20°–50° · 9 options · 3 stock shafts Tour Edge Exotics X725 Irons 2025 · 23°–54° · 8 options · 2 stock shafts Ben Hogan Fort Worth CB Irons 2025 · 23°–46° · 7 options · 2 stock shafts Callaway Apex Ai150 2025 · 20°–49° · 9 options · 1 stock shaft Cobra 3DP Tour Irons 2025 · 19°–50° · 9 options Honma Malbon Performance Iron (Ladies) 2025 · 27°–56° · 7 options
Other Tour Edge irons on record. Irons released in 2025 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Tour Edge's own specs, partly built.Taken from Tour Edge's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.8 configurations with 4 of the 7 specs an iron can publish.
- Stock shaft, built.3 stock shafts, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.