Titleist iron

The Titleist T150 iron is an iron in 10 options from 19°–48°, offered with 6 stock shafts, RH and LH.

options

19–48

loft °

stock shafts

160

shaft × flex options

2025

released

Built against the iron fieldpublished figures only

Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on Titleist →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Titleist.

This set's 7-iron is 32° — 60th percentile, weaker-lofted than 60% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

Titleist T150middle half of the field

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

Titleist T150 · 7-iron

LOFT · X AXIS32°: 60th percentile — weaker-lofted than 60% of the 889 sets that publish a 7-iron
LIE · Y AXIS63°: 97th percentile — more upright than 97% of the 889 sets that publish a 7-iron

7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Titleist T150 · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

Titleist's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

Titleist T150middle half of the field

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

Stock shaft build

Across every build: this club's stock shafts run weight from the 1st to the 43rd percentile, and torque from the 66th to the 97th percentile.

Stock shaft: Weight against Torque

The cloud is every iron shaft variant on record that publishes both weight and torque — 1,534 of them, binned by density.

Specifications by option

What this record publishes. Across 10 options: loft, lie and length on every one; swingweight on 9 of 10.


19	3-iron	RH / LH	61	0.13	39	D2
22	4-iron	RH / LH	61.5	0.122	38.5	D2
25	5-iron	RH / LH	62	0.11	38	D2
28	6-iron	RH / LH	62.5	0.102	37.5	D2
32	7-iron	RH / LH	63	0.091	37	D2
36	8-iron	RH / LH	63.5	0.079	36.5	D2
40	9-iron	RH / LH	64	0.071	36	D2
44	PW	RH / LH	64	0.059	35.75	D2
48	W	RH / LH	64	not published	35.5	not published
48	GW	RH / LH	64	0.055	35.5	D2

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Titleist did not publish that figure — we don't estimate.

Titleist publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps Titleist's own figure verbatim.

Stock shafts (6)

Every shaft Titleist lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

Mitsubishi Chemical MMT AMC Irons - Blue Series aftermarket 20 builds · 19°–48° · 2 flexes · 73–76 g · 3.4–3.6° · mid kick

Weight: 73–76 g
Torque: 3.4–3.6°
Kick point: mid
Flexes: R, S


19	3-iron	R	RH / LH	73	3.6	61	39	D2
19	3-iron	S	RH / LH	76	3.4	61	39	D2
22	4-iron	R	RH / LH	73	3.6	61.5	38.5	D2
22	4-iron	S	RH / LH	76	3.4	61.5	38.5	D2
25	5-iron	R	RH / LH	73	3.6	62	38	D2
25	5-iron	S	RH / LH	76	3.4	62	38	D2
28	6-iron	R	RH / LH	73	3.6	62.5	37.5	D2
28	6-iron	S	RH / LH	76	3.4	62.5	37.5	D2
32	7-iron	R	RH / LH	73	3.6	63	37	D2
32	7-iron	S	RH / LH	76	3.4	63	37	D2
36	8-iron	R	RH / LH	73	3.6	63.5	36.5	D2
36	8-iron	S	RH / LH	76	3.4	63.5	36.5	D2
40	9-iron	R	RH / LH	73	3.6	64	36	D2
40	9-iron	S	RH / LH	76	3.4	64	36	D2
44	PW	R	RH / LH	73	3.6	64	35.75	D2
44	PW	S	RH / LH	76	3.4	64	35.75	D2
48	GW	R	RH / LH	73	3.6	64	35.5	D2
48	W	R	RH / LH	73	3.6	64	35.5	not published
48	GW	S	RH / LH	76	3.4	64	35.5	D2
48	W	S	RH / LH	76	3.4	64	35.5	not published

Full specs for Mitsubishi Chemical MMT AMC Irons - Blue Series →

Mitsubishi Chemical MMT AMC Irons - Red Series aftermarket 40 builds · 19°–48° · 4 flexes · 40–57 g · 4.1–6°

Weight: 40–57 g
Torque: 4.1–6°
Flexes: R4, R3, R2, R


19	3-iron	R4	RH / LH	40	6	61	39	D2
19	3-iron	R3	RH / LH	48	4.1	61	39	D2
19	3-iron	R2	RH / LH	55	4.2	61	39	D2
19	3-iron	R	RH / LH	57	4.1	61	39	D2
22	4-iron	R4	RH / LH	40	6	61.5	38.5	D2
22	4-iron	R3	RH / LH	48	4.1	61.5	38.5	D2
22	4-iron	R2	RH / LH	55	4.2	61.5	38.5	D2
22	4-iron	R	RH / LH	57	4.1	61.5	38.5	D2
25	5-iron	R4	RH / LH	40	6	62	38	D2
25	5-iron	R3	RH / LH	48	4.1	62	38	D2
25	5-iron	R2	RH / LH	55	4.2	62	38	D2
25	5-iron	R	RH / LH	57	4.1	62	38	D2
28	6-iron	R4	RH / LH	40	6	62.5	37.5	D2
28	6-iron	R3	RH / LH	48	4.1	62.5	37.5	D2
28	6-iron	R2	RH / LH	55	4.2	62.5	37.5	D2
28	6-iron	R	RH / LH	57	4.1	62.5	37.5	D2
32	7-iron	R4	RH / LH	40	6	63	37	D2
32	7-iron	R3	RH / LH	48	4.1	63	37	D2
32	7-iron	R2	RH / LH	55	4.2	63	37	D2
32	7-iron	R	RH / LH	57	4.1	63	37	D2
36	8-iron	R4	RH / LH	40	6	63.5	36.5	D2
36	8-iron	R3	RH / LH	48	4.1	63.5	36.5	D2
36	8-iron	R2	RH / LH	55	4.2	63.5	36.5	D2
36	8-iron	R	RH / LH	57	4.1	63.5	36.5	D2
40	9-iron	R4	RH / LH	40	6	64	36	D2
40	9-iron	R3	RH / LH	48	4.1	64	36	D2
40	9-iron	R2	RH / LH	55	4.2	64	36	D2
40	9-iron	R	RH / LH	57	4.1	64	36	D2
44	PW	R4	RH / LH	40	6	64	35.75	D2
44	PW	R3	RH / LH	48	4.1	64	35.75	D2
44	PW	R2	RH / LH	55	4.2	64	35.75	D2
44	PW	R	RH / LH	57	4.1	64	35.75	D2
48	GW	R4	RH / LH	40	6	64	35.5	D2
48	W	R4	RH / LH	40	6	64	35.5	not published
48	GW	R3	RH / LH	48	4.1	64	35.5	D2
48	W	R3	RH / LH	48	4.1	64	35.5	not published
48	GW	R2	RH / LH	55	4.2	64	35.5	D2
48	W	R2	RH / LH	55	4.2	64	35.5	not published
48	GW	R	RH / LH	57	4.1	64	35.5	D2
48	W	R	RH / LH	57	4.1	64	35.5	not published

Full specs for Mitsubishi Chemical MMT AMC Irons - Red Series →

True Temper AMT Black aftermarket 20 builds · 19°–48° · 2 flexes · 115–116 g

Weight: 115–116 g
Flexes: R300, S300


19	3-iron	R300	RH / LH	115	61	39	D2
19	3-iron	S300	RH / LH	116	61	39	D2
22	4-iron	R300	RH / LH	115	61.5	38.5	D2
22	4-iron	S300	RH / LH	116	61.5	38.5	D2
25	5-iron	R300	RH / LH	115	62	38	D2
25	5-iron	S300	RH / LH	116	62	38	D2
28	6-iron	R300	RH / LH	115	62.5	37.5	D2
28	6-iron	S300	RH / LH	116	62.5	37.5	D2
32	7-iron	R300	RH / LH	115	63	37	D2
32	7-iron	S300	RH / LH	116	63	37	D2
36	8-iron	R300	RH / LH	115	63.5	36.5	D2
36	8-iron	S300	RH / LH	116	63.5	36.5	D2
40	9-iron	R300	RH / LH	115	64	36	D2
40	9-iron	S300	RH / LH	116	64	36	D2
44	PW	R300	RH / LH	115	64	35.75	D2
44	PW	S300	RH / LH	116	64	35.75	D2
48	GW	R300	RH / LH	115	64	35.5	D2
48	W	R300	RH / LH	115	64	35.5	not published
48	GW	S300	RH / LH	116	64	35.5	D2
48	W	S300	RH / LH	116	64	35.5	not published

Full specs for True Temper AMT Black →

True Temper AMT Red aftermarket 20 builds · 19°–48° · 2 flexes · 106–107 g

Weight: 106–107 g
Flexes: R300, S300


19	3-iron	R300	RH / LH	106	61	39	D2
19	3-iron	S300	RH / LH	107	61	39	D2
22	4-iron	R300	RH / LH	106	61.5	38.5	D2
22	4-iron	S300	RH / LH	107	61.5	38.5	D2
25	5-iron	R300	RH / LH	106	62	38	D2
25	5-iron	S300	RH / LH	107	62	38	D2
28	6-iron	R300	RH / LH	106	62.5	37.5	D2
28	6-iron	S300	RH / LH	107	62.5	37.5	D2
32	7-iron	R300	RH / LH	106	63	37	D2
32	7-iron	S300	RH / LH	107	63	37	D2
36	8-iron	R300	RH / LH	106	63.5	36.5	D2
36	8-iron	S300	RH / LH	107	63.5	36.5	D2
40	9-iron	R300	RH / LH	106	64	36	D2
40	9-iron	S300	RH / LH	107	64	36	D2
44	PW	R300	RH / LH	106	64	35.75	D2
44	PW	S300	RH / LH	107	64	35.75	D2
48	GW	R300	RH / LH	106	64	35.5	D2
48	W	R300	RH / LH	106	64	35.5	not published
48	GW	S300	RH / LH	107	64	35.5	D2
48	W	S300	RH / LH	107	64	35.5	not published

Full specs for True Temper AMT Red →

True Temper AMT Silver aftermarket 30 builds · 19°–48° · 3 flexes · 116–119 g

Weight: 116–119 g
Flexes: R300, S300, X100


19	3-iron	R300	RH / LH	116	61	39	D2
19	3-iron	S300	RH / LH	119	61	39	D2
19	3-iron	X100	RH / LH	119	61	39	D2
22	4-iron	R300	RH / LH	116	61.5	38.5	D2
22	4-iron	S300	RH / LH	119	61.5	38.5	D2
22	4-iron	X100	RH / LH	119	61.5	38.5	D2
25	5-iron	R300	RH / LH	116	62	38	D2
25	5-iron	S300	RH / LH	119	62	38	D2
25	5-iron	X100	RH / LH	119	62	38	D2
28	6-iron	R300	RH / LH	116	62.5	37.5	D2
28	6-iron	S300	RH / LH	119	62.5	37.5	D2
28	6-iron	X100	RH / LH	119	62.5	37.5	D2
32	7-iron	R300	RH / LH	116	63	37	D2
32	7-iron	S300	RH / LH	119	63	37	D2
32	7-iron	X100	RH / LH	119	63	37	D2
36	8-iron	R300	RH / LH	116	63.5	36.5	D2
36	8-iron	S300	RH / LH	119	63.5	36.5	D2
36	8-iron	X100	RH / LH	119	63.5	36.5	D2
40	9-iron	R300	RH / LH	116	64	36	D2
40	9-iron	S300	RH / LH	119	64	36	D2
40	9-iron	X100	RH / LH	119	64	36	D2
44	PW	R300	RH / LH	116	64	35.75	D2
44	PW	S300	RH / LH	119	64	35.75	D2
44	PW	X100	RH / LH	119	64	35.75	D2
48	GW	R300	RH / LH	116	64	35.5	D2
48	W	R300	RH / LH	116	64	35.5	not published
48	GW	S300	RH / LH	119	64	35.5	D2
48	W	S300	RH / LH	119	64	35.5	not published
48	GW	X100	RH / LH	119	64	35.5	D2
48	W	X100	RH / LH	119	64	35.5	not published

Full specs for True Temper AMT Silver →

True Temper AMT White aftermarket 30 builds · 19°–48° · 3 flexes · 127–130 g

Weight: 127–130 g
Flexes: R300, S300, X100


19	3-iron	R300	RH / LH	127	61	39	D2
19	3-iron	S300	RH / LH	130	61	39	D2
19	3-iron	X100	RH / LH	130	61	39	D2
22	4-iron	R300	RH / LH	127	61.5	38.5	D2
22	4-iron	S300	RH / LH	130	61.5	38.5	D2
22	4-iron	X100	RH / LH	130	61.5	38.5	D2
25	5-iron	R300	RH / LH	127	62	38	D2
25	5-iron	S300	RH / LH	130	62	38	D2
25	5-iron	X100	RH / LH	130	62	38	D2
28	6-iron	R300	RH / LH	127	62.5	37.5	D2
28	6-iron	S300	RH / LH	130	62.5	37.5	D2
28	6-iron	X100	RH / LH	130	62.5	37.5	D2
32	7-iron	R300	RH / LH	127	63	37	D2
32	7-iron	S300	RH / LH	130	63	37	D2
32	7-iron	X100	RH / LH	130	63	37	D2
36	8-iron	R300	RH / LH	127	63.5	36.5	D2
36	8-iron	S300	RH / LH	130	63.5	36.5	D2
36	8-iron	X100	RH / LH	130	63.5	36.5	D2
40	9-iron	R300	RH / LH	127	64	36	D2
40	9-iron	S300	RH / LH	130	64	36	D2
40	9-iron	X100	RH / LH	130	64	36	D2
44	PW	R300	RH / LH	127	64	35.75	D2
44	PW	S300	RH / LH	130	64	35.75	D2
44	PW	X100	RH / LH	130	64	35.75	D2
48	GW	R300	RH / LH	127	64	35.5	D2
48	W	R300	RH / LH	127	64	35.5	not published
48	GW	S300	RH / LH	130	64	35.5	D2
48	W	S300	RH / LH	130	64	35.5	not published
48	GW	X100	RH / LH	130	64	35.5	D2
48	W	X100	RH / LH	130	64	35.5	not published

Full specs for True Temper AMT White →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

Figure	Published	All irons	2025	Among its peers
Strongest-lofted 7-iron	32°	=438th of 953	=46th of 61	=29th of 124 Titleist irons · =48th of 508 low-handicap irons
Most offset at the 7-iron	0.091"	=476th of 583	=43rd of 50	=70th of 85 Titleist irons · =176th of 283 low-handicap irons
Widest loft range	29°	=629th of 1,104	=37th of 68	=64th of 129 Titleist irons · =241st of 508 low-handicap irons
Most upright lie	63°	=33rd of 941	=5th of 61	=1st of 124 Titleist irons · =8th of 505 low-handicap irons
Longest	37"	=265th of 894	=35th of 60	=1st of 115 Titleist irons · =83rd of 466 low-handicap irons

player level — derived

This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.091", 7-iron loft 32°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs Cobra 3DP Tour Irons · vs Callaway Apex Ai150 · vs Wilson DYNAPWR Irons

More irons

Titleist T100 2025 · 20°–50° · 10 options · 6 stock shafts Titleist T250 2025 · 18°–48° · 10 options · 6 stock shafts Titleist T250 Launch Spec 2025 · 27°–52° · 7 options · 6 stock shafts Titleist T250·U 2025 · 18°–22° · 3 options · 3 stock shafts Ben Hogan Fort Worth CB Irons 2025 · 23°–46° · 7 options · 2 stock shafts Callaway Apex Ai150 2025 · 20°–49° · 9 options · 1 stock shaft Cobra 3DP Tour Irons 2025 · 19°–50° · 9 options Honma Malbon Performance Iron (Ladies) 2025 · 27°–56° · 7 options

Other Titleist irons on record. Irons released in 2025 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

Titleist's own specs, partly built.Taken from Titleist's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
Published options, built.10 configurations with 5 of the 7 specs an iron can publish.
Stock shaft, built.6 stock shafts, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 5 fields we don't hold — or tell us something here is wrong