Skip to content
Zomma Golf
Menu

TaylorMade iron

The TaylorMade SIM2 Max Irons is an iron in 10 options from 19°–59°, offered with 2 stock shafts, RH and LH.

10
options
19–59
loft °
2
stock shafts
60
shaft × flex options
2021
released
Built against the iron fieldpublished figures only
DIFFERENCE FROM THE MEDIAN OF EVERY RECORD WE HOLDLOFTMEDIAN 33.0°35.3° +2.3LIEMEDIAN 62.5°63.8° +1.3LENGTHMEDIAN 37.00"36.50" -0.5OFFSETMEDIAN 0.115"0.128" +0.013
Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on TaylorMade →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just TaylorMade.

This set's 7-iron is 28.5° — 13th percentile, stronger-lofted than 87% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

TaylorMade SIM2 Max Ironsmiddle half of the field
2030405060123456789PWGW/AWSWLWLOFT (°)TaylorMade SIM2 Max Irons — 4: 19°TaylorMade SIM2 Max Irons — 5: 21.5°TaylorMade SIM2 Max Irons — 6: 25°TaylorMade SIM2 Max Irons — 7: 28.5°TaylorMade SIM2 Max Irons — 8: 32.5°TaylorMade SIM2 Max Irons — 9: 38°TaylorMade SIM2 Max Irons — PW: 43.5°TaylorMade SIM2 Max Irons — AW: 49°TaylorMade SIM2 Max Irons — SW: 54°TaylorMade SIM2 Max Irons — LW: 59°

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

TaylorMade SIM2 Max Irons · 7-iron

LOFT · X AXIS28.5°
13th percentile — stronger-lofted than 87% of the 889 sets that publish a 7-iron
LIE · Y AXIS63°
97th percentile — more upright than 97% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Published offset of 0.165 in (published as 4.2 mm): the leading edge sits 0.165 in behind the line of the shaft, against a median of 0.12 in for the 7-iron of 580 iron sets on record that publish one.MEDIAN 0.12 inOFFSET 0.165 in · 4.2 mm as publishedSHAFTLEADING EDGE0.25 INLEADING EDGE BEHIND THE SHAFTNOMINAL OUTLINE · SEEN FROM THE TOE · TRUE SCALE

TaylorMade SIM2 Max Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

TaylorMade's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

TaylorMade SIM2 Max Ironsmiddle half of the field
0.050.10.150.223456789PWGW/AWSWLWOFFSET (IN)TaylorMade SIM2 Max Irons — 4: 0.228 inTaylorMade SIM2 Max Irons — 5: 0.205 inTaylorMade SIM2 Max Irons — 6: 0.185 inTaylorMade SIM2 Max Irons — 7: 0.165 inTaylorMade SIM2 Max Irons — 8: 0.138 inTaylorMade SIM2 Max Irons — 9: 0.118 inTaylorMade SIM2 Max Irons — PW: 0.102 inTaylorMade SIM2 Max Irons — AW: 0.079 inTaylorMade SIM2 Max Irons — SW: 0.059 inTaylorMade SIM2 Max Irons — LW: 0.059 in

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

TaylorMade publishes no shaft weight or torque for any of the builds this club ships in, so there is nothing to place them against. Every stock shaft is still listed below, with whatever the maker does publish.

Specifications by option

What this record publishes. Across 10 options: loft, lie, length and swingweight on every one.

10 rows, unsorted, collapsed — use the button below the table to show every option.

194-ironRH / LH61.50.228239.125D1/D00.2285.8
21.55-ironRH / LH620.2053.538.5D1/D00.2055.2
256-ironRH / LH62.50.185537.88D1/D00.1854.7
28.57-ironRH / LH630.1655.637.25D1/D00.1654.2
32.58-ironRH / LH63.50.1386.336.75D1/D00.1383.5
389-ironRH / LH640.1186.836.25D1/D00.1183
43.5PWRH / LH64.50.1027.835.75D1/D00.1022.6
49AWRH / LH64.50.079935.5D1/D00.0792
54SWRH / LH64.50.059935.25D3/D10.0591.5
59LWRH64.50.059935D3/D10.0591.5

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.

TaylorMade publishes offset in millimetres; the offset (in) column is that figure converted, and TaylorMade's own is in the column beside it.

TaylorMade publishes offset in millimetres. The (in) column is that figure converted at 25.4 mm to the inch, and TaylorMade's own millimetre column sits beside it — neither is dropped, so the published figure is always on the page.

Stock shafts (2)

Every shaft TaylorMade lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

Fujikura Ventus Blue (TaylorMade stock) made-for specs pending sources disagree 30 builds · 19°–59° · 3 flexes
Flexes
Regular, Senior, Stiff

30 rows, unsorted.

194-ironRegularRH / LH61.539.125D1/D0
194-ironSeniorRH / LH61.539.125D1/D0
194-ironStiffRH / LH61.539.125D1/D0
21.55-ironRegularRH / LH6238.5D1/D0
21.55-ironSeniorRH / LH6238.5D1/D0
21.55-ironStiffRH / LH6238.5D1/D0
256-ironRegularRH / LH62.537.88D1/D0
256-ironSeniorRH / LH62.537.88D1/D0
256-ironStiffRH / LH62.537.88D1/D0
28.57-ironRegularRH / LH6337.25D1/D0
28.57-ironSeniorRH / LH6337.25D1/D0
28.57-ironStiffRH / LH6337.25D1/D0
32.58-ironRegularRH / LH63.536.75D1/D0
32.58-ironSeniorRH / LH63.536.75D1/D0
32.58-ironStiffRH / LH63.536.75D1/D0
389-ironRegularRH / LH6436.25D1/D0
389-ironSeniorRH / LH6436.25D1/D0
389-ironStiffRH / LH6436.25D1/D0
43.5PWRegularRH / LH64.535.75D1/D0
43.5PWSeniorRH / LH64.535.75D1/D0
43.5PWStiffRH / LH64.535.75D1/D0
49AWRegularRH / LH64.535.5D1/D0
49AWSeniorRH / LH64.535.5D1/D0
49AWStiffRH / LH64.535.5D1/D0
54SWRegularRH / LH64.535.25D3/D1
54SWSeniorRH / LH64.535.25D3/D1
54SWStiffRH / LH64.535.25D3/D1
59LWRegularRH64.535D3/D1
59LWSeniorRH64.535D3/D1
59LWStiffRH64.535D3/D1

Full specs for Fujikura Ventus Blue (TaylorMade stock) →

KBS Max 85 MT Steel (TaylorMade stock) made-for specs pending sources disagree 30 builds · 19°–59° · 3 flexes
Flexes
Regular, Senior, Stiff

30 rows, unsorted.

194-ironRegularRH / LH61.539.125D1/D0
194-ironSeniorRH / LH61.539.125D1/D0
194-ironStiffRH / LH61.539.125D1/D0
21.55-ironRegularRH / LH6238.5D1/D0
21.55-ironSeniorRH / LH6238.5D1/D0
21.55-ironStiffRH / LH6238.5D1/D0
256-ironRegularRH / LH62.537.88D1/D0
256-ironSeniorRH / LH62.537.88D1/D0
256-ironStiffRH / LH62.537.88D1/D0
28.57-ironRegularRH / LH6337.25D1/D0
28.57-ironSeniorRH / LH6337.25D1/D0
28.57-ironStiffRH / LH6337.25D1/D0
32.58-ironRegularRH / LH63.536.75D1/D0
32.58-ironSeniorRH / LH63.536.75D1/D0
32.58-ironStiffRH / LH63.536.75D1/D0
389-ironRegularRH / LH6436.25D1/D0
389-ironSeniorRH / LH6436.25D1/D0
389-ironStiffRH / LH6436.25D1/D0
43.5PWRegularRH / LH64.535.75D1/D0
43.5PWSeniorRH / LH64.535.75D1/D0
43.5PWStiffRH / LH64.535.75D1/D0
49AWRegularRH / LH64.535.5D1/D0
49AWSeniorRH / LH64.535.5D1/D0
49AWStiffRH / LH64.535.5D1/D0
54SWRegularRH / LH64.535.25D3/D1
54SWSeniorRH / LH64.535.25D3/D1
54SWStiffRH / LH64.535.25D3/D1
59LWRegularRH64.535D3/D1
59LWSeniorRH64.535D3/D1
59LWStiffRH64.535D3/D1

Full specs for KBS Max 85 MT Steel (TaylorMade stock) →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

FigurePublishedAll irons2021Among its peers
Strongest-lofted 7-iron28.5°=101st of 953=5th of 36=9th of 86 TaylorMade irons · =100th of 208 high-handicap irons
Most offset at the 7-iron0.165"=104th of 5834th of 26=20th of 68 TaylorMade irons · =84th of 155 high-handicap irons
Widest loft range40°=96th of 1,104=2nd of 42=26th of 89 TaylorMade irons · =23rd of 208 high-handicap irons
Most upright lie63°=33rd of 941=3rd of 35=2nd of 83 TaylorMade irons · =20th of 203 high-handicap irons
Longest37.3"=49th of 894=3rd of 35=4th of 85 TaylorMade irons · =24th of 201 high-handicap irons

Every field counts only the clubs that actually publish that figure, which is why the totals differ from row to row — a year's offset field is the irons publishing an offset, not the irons released that year. Ties share an ordinal and are marked =. How this is computed →

player level — derived

This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.165", 7-iron loft 28.5°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs New Level 902-OS · vs Ben Hogan Edge EX Irons · vs Tour Edge Exotics C721 Iron Set

More irons

TaylorMade P∙790 Irons (2021) discontinued 2021 · 19°–50° · 9 options TaylorMade P∙770 Irons (2020) discontinued 2020 · 19.5°–51° · 9 options TaylorMade P∙7MB Irons 2022 · 20°–47° · 8 options · 1 stock shaft TaylorMade P∙7MC Irons discontinued 2022 · 20°–47° · 8 options Ben Hogan Edge EX Irons 2021 · 20°–44° · 7 options · 3 stock shafts Callaway Apex 21 discontinued 2021 · 19°–48° · 9 options Cleveland Launcher XL Halo Irons discontinued 2021 · 20°–54.5° · 9 options Cobra RADSPEED Irons discontinued 2021 · 19°–54° · 9 options

Other TaylorMade irons on record. Irons released in 2021 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

  • TaylorMade's own specs, partly built.Taken from TaylorMade's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
  • Published options, built.10 configurations with 6 of the 7 specs an iron can publish.
  • Stock shaft, built.2 stock shafts, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 4 fields we don't hold — or tell us something here is wrong