TaylorMade iron
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just TaylorMade.
This set's 7-iron is 34° — 86th percentile, weaker-lofted than 86% of the 889 sets that publish one. The median is 32°.
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
TaylorMade P∙7MB Irons · 7-iron
- LOFT · X AXIS34°
- 86th percentile — weaker-lofted than 86% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
TaylorMade P∙7MB Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
TaylorMade's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Across every build: this club's stock shafts run weight at the 91st percentile.
Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.
120 — 163 iron shaft variants · 9% of 1,910
Specifications by option
What this record publishes. Across 8 options: loft, lie, length and swingweight on every one.
8 rows, unsorted.
| 20 | 3-iron | RH / LH | 60.5 | 0.075 | 39 | D2 | 0.075 | 1.9 |
| 23 | 4-iron | RH / LH | 61 | 0.071 | 38.5 | D2 | 0.071 | 1.8 |
| 26 | 5-iron | RH / LH | 61.5 | 0.069 | 38 | D2 | 0.069 | 1.75 |
| 30 | 6-iron | RH / LH | 62 | 0.067 | 37.5 | D2 | 0.067 | 1.7 |
| 34 | 7-iron | RH / LH | 62.5 | 0.063 | 37 | D2 | 0.063 | 1.6 |
| 38 | 8-iron | RH / LH | 63 | 0.061 | 36.5 | D2 | 0.061 | 1.55 |
| 42.5 | 9-iron | RH / LH | 63.5 | 0.059 | 36 | D2 | 0.059 | 1.5 |
| 47 | PW | RH / LH | 64 | 0.055 | 35.75 | D3 | 0.055 | 1.4 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.
TaylorMade publishes offset in millimetres; the offset (in) column is that figure converted, and TaylorMade's own is in the column beside it.
TaylorMade publishes offset in millimetres. The (in) column is that figure converted at 25.4 mm to the inch, and TaylorMade's own millimetre column sits beside it — neither is dropped, so the published figure is always on the page.
Stock shafts (1)
Every shaft TaylorMade lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
KBS Tour aftermarket 8 builds · 20°–47° · 1 flex · 120 g
- Weight
- 120 g
- Launch
- mid
- Flexes
- Stiff
8 rows, unsorted.
| 20 | 3-iron | Stiff | RH / LH | 120 | 60.5 | 39 | D2 |
| 23 | 4-iron | Stiff | RH / LH | 120 | 61 | 38.5 | D2 |
| 26 | 5-iron | Stiff | RH / LH | 120 | 61.5 | 38 | D2 |
| 30 | 6-iron | Stiff | RH / LH | 120 | 62 | 37.5 | D2 |
| 34 | 7-iron | Stiff | RH / LH | 120 | 62.5 | 37 | D2 |
| 38 | 8-iron | Stiff | RH / LH | 120 | 63 | 36.5 | D2 |
| 42.5 | 9-iron | Stiff | RH / LH | 120 | 63.5 | 36 | D2 |
| 47 | PW | Stiff | RH / LH | 120 | 64 | 35.75 | D3 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:
- Stock shaft: KBS Tour Steel, Stiff flex -- linked directly to the existing kbs/tour record (flex label matches exactly); tip-diameter selection ambiguity flagged in the stock_shaft_options upcharge_note.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2022 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 34° | =677th of 953 | =25th of 34 | =66th of 86 TaylorMade irons · =246th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.063" | =568th of 583 | 25th of 25 | 66th of 68 TaylorMade irons · =268th of 283 low-handicap irons |
| Widest loft range | 27° | =771st of 1,104 | =25th of 39 | =79th of 89 TaylorMade irons · =323rd of 508 low-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | =10th of 32 | =40th of 83 TaylorMade irons · =88th of 505 low-handicap irons |
| Longest | 37" | =265th of 894 | =10th of 32 | =17th of 85 TaylorMade irons · =83rd of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.063", 7-iron loft 34°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Miura CB-801 · vs Tour Edge Exotics C722 Irons · vs Callaway Great Big Bertha 23 Iron Set
More irons
Other TaylorMade irons on record. Irons released in 2022 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
2 of 3 parts of this club page are built, and we're filling in the rest.
- TaylorMade's own specs, partly built.Taken from TaylorMade's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.8 configurations with 5 of the 7 specs an iron can publish.
- Stock shaft, built.1 stock shaft, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.