Skip to content
Zomma Golf
Menu

Cobra iron

The Cobra Forged Tec X Irons is an iron in 8 options from 19°–48°, offered with the KBS Tour Lite (COBRA Stock), RH.

Discontinued. Kept here because the published specs still matter to anyone playing one or buying used.

8
options
19–48
loft °
1
stock shaft
16
shaft × flex options
2022
released
Built against the iron fieldpublished figures only
DIFFERENCE FROM THE MEDIAN OF EVERY RECORD WE HOLDLOFTMEDIAN 33.0°29.3° -3.8LIEMEDIAN 62.5°63.8° +1.3LENGTHMEDIAN 37.00"37.00" 0OFFSETMEDIAN 0.115"0.110" -0.005
Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on Cobra →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Cobra.

This set's 7-iron is 27° — 5th percentile, stronger-lofted than 95% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

Cobra Forged Tec X Ironsmiddle half of the field
2030405060123456789PWGW/AWSWLWLOFT (°)Cobra Forged Tec X Irons — 4: 19°Cobra Forged Tec X Irons — 5: 21°Cobra Forged Tec X Irons — 6: 24°Cobra Forged Tec X Irons — 7: 27°Cobra Forged Tec X Irons — 8: 31.5°Cobra Forged Tec X Irons — 9: 36.5°Cobra Forged Tec X Irons — PW: 42°Cobra Forged Tec X Irons — GW: 48°

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

Cobra Forged Tec X Irons · 7

LOFT · X AXIS27°
5th percentile — stronger-lofted than 95% of the 889 sets that publish a 7-iron
LIE · Y AXIS63.5°
100th percentile — the highest of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Published offset of 0.118 in (published as 3 mm): the leading edge sits 0.118 in behind the line of the shaft, against a median of 0.12 in for the 7-iron of 580 iron sets on record that publish one.MEDIAN 0.12 inOFFSET 0.118 in · 3 mm as publishedSHAFTLEADING EDGE0.25 INLEADING EDGE BEHIND THE SHAFTNOMINAL OUTLINE · SEEN FROM THE TOE · TRUE SCALE

Cobra Forged Tec X Irons · 7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

Cobra's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

Cobra Forged Tec X Ironsmiddle half of the field
0.050.10.150.223456789PWGW/AWSWLWOFFSET (IN)Cobra Forged Tec X Irons — 4: 0.165 inCobra Forged Tec X Irons — 5: 0.15 inCobra Forged Tec X Irons — 6: 0.134 inCobra Forged Tec X Irons — 7: 0.118 inCobra Forged Tec X Irons — 8: 0.102 inCobra Forged Tec X Irons — 9: 0.087 inCobra Forged Tec X Irons — PW: 0.071 inCobra Forged Tec X Irons — GW: 0.059 in

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

Stock shaft build

Across every build: this club's stock shafts run weight at the 74th percentile.

Stock shaft: Weight on record

Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.

30: 883040: 1411414050: 1821825060: 2572576070: 2412417080: 1991998090: 25125190100: 241241100110: 170170110120: 163163120130: 5757130SHAFT VARIANTSWEIGHT (G)

100 — 241 iron shaft variants · 13% of 1,910

Specifications by option

What this record publishes. Across 8 options: loft, lie, length and swingweight on every one.

8 rows, unsorted.

194620.16538.75D0 (steel); D1 (S) / D0 (R) graphite0.1654.2
21562.50.1538.25D0 (steel); D1 (S) / D0 (R) graphite0.153.8
246630.13437.75D0 (steel); D1 (S) / D0 (R) graphite0.1343.4
27763.50.11837.25D0 (steel); D1 (S) / D0 (R) graphite0.1183
31.58640.10236.75D0 (steel); D1 (S) / D0 (R) graphite0.1022.6
36.5964.50.08736.25D0 (steel); D1 (S) / D0 (R) graphite0.0872.2
42PW650.07136D1 (steel); D1.5 (S) / D0.5 (R) graphite0.0711.8
48GW650.05935.75D1 (steel); D1.5 (S) / D0.5 (R) graphite0.0591.5

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Cobra did not publish that figure — we don't estimate.

Cobra publishes offset in millimetres; the offset (in) column is that figure converted, and Cobra's own is in the column beside it.

Cobra publishes offset in millimetres. The (in) column is that figure converted at 25.4 mm to the inch, and Cobra's own millimetre column sits beside it — neither is dropped, so the published figure is always on the page.

Stock shafts (1)

Every shaft Cobra lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

KBS Tour Lite (COBRA Stock) made-for 16 builds · 19°–48° · 2 flexes · 105 g
Weight
105 g
Spin
mid
Flexes
R, S

16 rows, unsorted.

194R1056238.75D0 (steel); D1 (S) / D0 (R) graphite
194S1056238.75D0 (steel); D1 (S) / D0 (R) graphite
215R10562.538.25D0 (steel); D1 (S) / D0 (R) graphite
215S10562.538.25D0 (steel); D1 (S) / D0 (R) graphite
246R1056337.75D0 (steel); D1 (S) / D0 (R) graphite
246S1056337.75D0 (steel); D1 (S) / D0 (R) graphite
277R10563.537.25D0 (steel); D1 (S) / D0 (R) graphite
277S10563.537.25D0 (steel); D1 (S) / D0 (R) graphite
31.58R1056436.75D0 (steel); D1 (S) / D0 (R) graphite
31.58S1056436.75D0 (steel); D1 (S) / D0 (R) graphite
36.59R10564.536.25D0 (steel); D1 (S) / D0 (R) graphite
36.59S10564.536.25D0 (steel); D1 (S) / D0 (R) graphite
42PWR1056536D1 (steel); D1.5 (S) / D0.5 (R) graphite
42PWS1056536D1 (steel); D1.5 (S) / D0.5 (R) graphite
48GWR1056535.75D1 (steel); D1.5 (S) / D0.5 (R) graphite
48GWS1056535.75D1 (steel); D1.5 (S) / D0.5 (R) graphite

Full specs for KBS Tour Lite (COBRA Stock) →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

FigurePublishedAll irons2022Among its peers
Strongest-lofted 7-iron27°=12th of 9534th of 34=6th of 70 Cobra irons · =12th of 208 high-handicap irons
Most offset at the 7-iron0.118"=294th of 583=11th of 25=27th of 47 Cobra irons · =150th of 155 high-handicap irons
Widest loft range29°=629th of 1,104=17th of 39=51st of 76 Cobra irons · =171st of 208 high-handicap irons
Most upright lie63.5°=8th of 941=1st of 32=5th of 70 Cobra irons · =4th of 203 high-handicap irons
Longest37.3"=49th of 894=2nd of 32=8th of 68 Cobra irons · =24th of 201 high-handicap irons

player level — derived

This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.118", 7-iron loft 27° (strong distance loft). A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs Miura CB-801 · vs Tour Edge Exotics C722 Irons · vs Callaway Great Big Bertha 23 Iron Set

More irons

Other Cobra irons on record. Irons released in 2022 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

  • Cobra's own specs, partly built.Taken from Cobra's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
  • Published options, built.8 configurations with 5 of the 7 specs an iron can publish.
  • Stock shaft, built.1 stock shaft, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 4 fields we don't hold — or tell us something here is wrong