Honma iron
The Honma Bugatti Premium Iron is an iron in 8 options from 25°–56°, offered with the Honma Vizard for Bugatti 3S, RH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Honma.
This set's 7-iron is 28° — 11th percentile, stronger-lofted than 89% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Honma Bugatti Premium Ironmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
10, 11 are in the set and on the ladder above, but too few sets on record publish those clubs to place them in a field of their own.
Honma Bugatti Premium Iron · #7
- LOFT · X AXIS28°
- 11th percentile — stronger-lofted than 89% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Honma Bugatti Premium Iron · #7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Honma's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Honma Bugatti Premium Ironmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Honma publishes no shaft weight or torque for any of the builds this club ships in, so there is nothing to place them against. Every stock shaft is still listed below, with whatever the maker does publish.
Specifications by option
What this record publishes. Across 8 options: loft, lie and length on every one.
8 rows, unsorted.
| 25 | #6 | 62 | 0.138 | 37.75 | 0.138 | 3.5 |
| 28 | #7 | 62.5 | 0.118 | 37.25 | 0.118 | 3 |
| 32 | #8 | 63 | 0.118 | 36.75 | 0.118 | 3 |
| 36 | #9 | 63.5 | 0.098 | 36.25 | 0.098 | 2.5 |
| 41 | #10 | 63.5 | 0.098 | 35.75 | 0.098 | 2.5 |
| 46 | #11 | 63.5 | 0.079 | 35.5 | 0.079 | 2 |
| 51 | AW | 63.5 | 0.079 | 35.5 | 0.079 | 2 |
| 56 | SW | 64.5 | 0.079 | 35.25 | 0.079 | 2 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Honma did not publish that figure — we don't estimate.
Honma publishes offset in millimetres; the offset (in) column is that figure converted, and Honma's own is in the column beside it.
Honma publishes offset in millimetres. The (in) column is that figure converted at 25.4 mm to the inch, and Honma's own millimetre column sits beside it — neither is dropped, so the published figure is always on the page.
Stock shafts (1)
Every shaft Honma lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
Honma Vizard for Bugatti 3S made-for specs pending 16 builds · 25°–56° · 2 flexes
- Flexes
- R, S
16 rows, unsorted.
| 25 | #6 | R | 62 | 37.75 |
| 25 | #6 | S | 62 | 37.75 |
| 28 | #7 | R | 62.5 | 37.25 |
| 28 | #7 | S | 62.5 | 37.25 |
| 32 | #8 | R | 63 | 36.75 |
| 32 | #8 | S | 63 | 36.75 |
| 36 | #9 | R | 63.5 | 36.25 |
| 36 | #9 | S | 63.5 | 36.25 |
| 41 | #10 | R | 63.5 | 35.75 |
| 41 | #10 | S | 63.5 | 35.75 |
| 46 | #11 | R | 63.5 | 35.5 |
| 46 | #11 | S | 63.5 | 35.5 |
| 51 | AW | R | 63.5 | 35.5 |
| 51 | AW | S | 63.5 | 35.5 |
| 56 | SW | R | 64.5 | 35.25 |
| 56 | SW | S | 64.5 | 35.25 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2026 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 28° | =70th of 953 | =6th of 56 | =17th of 40 Honma irons · =70th of 208 high-handicap irons |
| Most offset at the 7-iron | 0.118" | =294th of 583 | 25th of 47 | =9th of 17 Honma irons · =150th of 155 high-handicap irons |
| Widest loft range | 31° | =496th of 1,104 | =23rd of 57 | =23rd of 43 Honma irons · =157th of 208 high-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | =24th of 56 | =1st of 35 Honma irons · =55th of 203 high-handicap irons |
| Longest | 37.3" | =49th of 894 | =2nd of 53 | =1st of 31 Honma irons · =24th of 201 high-handicap irons |
player level — derived
This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.118", 7-iron loft 28° (strong distance loft). A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Cobra COBRA 3DP MB Irons · vs Wilson DYNAPWR Forged Steel Irons · vs Tour Edge Exotics CB Irons
More irons
Honma BERES 10 3-Star Iron 2026 · 21°–55° · 9 options · 1 stock shaft Honma BERES 10 4-Star Iron 2026 · 21°–55° · 9 options · 1 stock shaft Honma BERES 10 5-Star Iron 2026 · 21°–55° · 9 options · 1 stock shaft Honma Bugatti Super Premium Iron 2026 · 24°–56° · 8 options Callaway Quantum Max 2026 · 19°–55° · 10 options · 3 stock shafts Cobra BAFFLER Irons 2026 · 21°–56° · 9 options Miura LC-930 2026 · 22°–48° · 8 options Mizuno Mizuno Pro M-13 2026 · 22°–48° · 8 options · 4 stock shafts
Other Honma irons on record. Irons released in 2026 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Honma's own specs, partly built.Taken from Honma's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.8 configurations with 4 of the 7 specs an iron can publish.
- Stock shaft, built.1 stock shaft, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.