Cobra iron
The Cobra KING TEC Irons is an iron in 9 options from 19°–49°, offered with the KBS C-Taper Lite (COBRA Stock), RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Cobra.
This set's 7-iron is 29.5° — 20th percentile, stronger-lofted than 80% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Cobra KING TEC Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Cobra KING TEC Irons · 7
- LOFT · X AXIS29.5°
- 20th percentile — stronger-lofted than 80% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Cobra KING TEC Irons · 7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Cobra's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Cobra KING TEC Ironsmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight from the 83rd to the 87th percentile.
Stock shaft: Weight on record
Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.
110 — 170 iron shaft variants · 9% of 1,910
Specifications by option
What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.
9 rows, unsorted, collapsed — use the button below the table to show every option.
| 19 | 3 | RH / LH | 60.5 | 0.154 | 39.25 | D2 |
| 21 | 4 | RH / LH | 61 | 0.142 | 38.75 | D2 |
| 23 | 5 | RH / LH | 61.5 | 0.13 | 38.25 | D2 |
| 26 | 6 | RH / LH | 62 | 0.118 | 37.75 | D2 |
| 29.5 | 7 | RH / LH | 62.5 | 0.106 | 37.25 | D2 |
| 34 | 8 | RH / LH | 63 | 0.094 | 36.75 | D2 |
| 39 | 9 | RH / LH | 63.5 | 0.083 | 36.25 | D2 |
| 44 | PW | RH / LH | 64 | 0.071 | 36 | D3 |
| 49 | GW | RH / LH | 64 | 0.059 | 35.75 | D3 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Cobra did not publish that figure — we don't estimate.
Cobra publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps Cobra's own figure verbatim.
Stock shafts (1)
Every shaft Cobra lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
KBS C-Taper Lite (COBRA Stock) made-for 18 builds · 19°–49° · 2 flexes · 110–115 g
- Weight
- 110–115 g
- Flexes
- R, S
18 rows, unsorted.
| 19 | 3 | R | RH / LH | 110 | 60.5 | 39.25 | D2 |
| 19 | 3 | S | RH / LH | 115 | 60.5 | 39.25 | D2 |
| 21 | 4 | R | RH / LH | 110 | 61 | 38.75 | D2 |
| 21 | 4 | S | RH / LH | 115 | 61 | 38.75 | D2 |
| 23 | 5 | R | RH / LH | 110 | 61.5 | 38.25 | D2 |
| 23 | 5 | S | RH / LH | 115 | 61.5 | 38.25 | D2 |
| 26 | 6 | R | RH / LH | 110 | 62 | 37.75 | D2 |
| 26 | 6 | S | RH / LH | 115 | 62 | 37.75 | D2 |
| 29.5 | 7 | R | RH / LH | 110 | 62.5 | 37.25 | D2 |
| 29.5 | 7 | S | RH / LH | 115 | 62.5 | 37.25 | D2 |
| 34 | 8 | R | RH / LH | 110 | 63 | 36.75 | D2 |
| 34 | 8 | S | RH / LH | 115 | 63 | 36.75 | D2 |
| 39 | 9 | R | RH / LH | 110 | 63.5 | 36.25 | D2 |
| 39 | 9 | S | RH / LH | 115 | 63.5 | 36.25 | D2 |
| 44 | PW | R | RH / LH | 110 | 64 | 36 | D3 |
| 44 | PW | S | RH / LH | 115 | 64 | 36 | D3 |
| 49 | GW | R | RH / LH | 110 | 64 | 35.75 | D3 |
| 49 | GW | S | RH / LH | 115 | 64 | 35.75 | D3 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:
- Only one stock shaft published on this page (KBS $-TAPER LITE, i.e.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2025 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 29.5° | =172nd of 953 | 23rd of 61 | =21st of 70 Cobra irons · =5th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.106" | =370th of 583 | =35th of 50 | =36th of 47 Cobra irons · =70th of 283 low-handicap irons |
| Widest loft range | 30° | =552nd of 1,104 | =31st of 68 | =43rd of 76 Cobra irons · =191st of 508 low-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | =11th of 61 | =30th of 70 Cobra irons · =88th of 505 low-handicap irons |
| Longest | 37.3" | =49th of 894 | =8th of 60 | =8th of 68 Cobra irons · =8th of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.106", 7-iron loft 29.5°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Callaway Apex Ai150 · vs Wilson DYNAPWR Irons · vs Tour Edge Exotics C725 Irons
More irons
Cobra 3DP Tour Irons 2025 · 19°–50° · 9 options Cobra COBRA 3DP Tour Irons 2025 · 19°–50° · 9 options · 1 stock shaft Cobra DS-ADAPT Irons 2025 · 19°–54° · 9 options Cobra DS-ADAPT MAX Irons 2025 · 21°–55° · 9 options Ben Hogan Fort Worth CB Irons 2025 · 23°–46° · 7 options · 2 stock shafts Callaway Apex Ai150 2025 · 20°–49° · 9 options · 1 stock shaft Honma Malbon Performance Iron (Ladies) 2025 · 27°–56° · 7 options Miura TC-202 2025 · 21°–50° · 9 options
Other Cobra irons on record. Irons released in 2025 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Cobra's own specs, partly built.Taken from Cobra's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.9 configurations with 5 of the 7 specs an iron can publish.
- Stock shaft, built.1 stock shaft, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.