Skip to content
Zomma Golf
Menu

Cobra iron

The Cobra DS-ADAPT MAX Irons is an iron in 9 options from 21°–55°, RH and LH.

9
options
21–55
loft °
2025
released (est.)
Built against the iron fieldpublished figures only
DIFFERENCE FROM THE MEDIAN OF EVERY RECORD WE HOLDLOFTMEDIAN 33.0°33.5° +0.5LIEMEDIAN 62.5°64.5° +2LENGTHMEDIAN 37.00"36.75" -0.25OFFSETMEDIAN 0.115"0.173" +0.058
Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

Image not published

Where this club lands

The field is every iron in the database that publishes both of the chart's figures — every brand, not just Cobra.

This set's 7-iron is 29° — 19th percentile, stronger-lofted than 81% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

Cobra DS-ADAPT MAX Ironsmiddle half of the field
2030405060123456789PWGW/AWSWLWLOFT (°)Cobra DS-ADAPT MAX Irons — 4: 21°Cobra DS-ADAPT MAX Irons — 5: 23°Cobra DS-ADAPT MAX Irons — 6: 26°Cobra DS-ADAPT MAX Irons — 7: 29°Cobra DS-ADAPT MAX Irons — 8: 33.5°Cobra DS-ADAPT MAX Irons — 9: 38.5°Cobra DS-ADAPT MAX Irons — PW: 43.5°Cobra DS-ADAPT MAX Irons — GW: 49°Cobra DS-ADAPT MAX Irons — SW: 55°

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

Cobra DS-ADAPT MAX Irons · 7

LOFT · X AXIS29°
19th percentile — stronger-lofted than 81% of the 889 sets that publish a 7-iron
LIE · Y AXIS64°
100th percentile — the highest of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Published offset of 0.201 in (published as 5.1 mm): the leading edge sits 0.201 in behind the line of the shaft, against a median of 0.12 in for the 7-iron of 580 iron sets on record that publish one.MEDIAN 0.12 inOFFSET 0.201 in · 5.1 mm as publishedSHAFTLEADING EDGE0.25 INLEADING EDGE BEHIND THE SHAFTNOMINAL OUTLINE · SEEN FROM THE TOE · TRUE SCALE

Cobra DS-ADAPT MAX Irons · 7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

Cobra's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

Cobra DS-ADAPT MAX Ironsmiddle half of the field
0.050.10.150.20.250.323456789PWGW/AWSWLWOFFSET (IN)Cobra DS-ADAPT MAX Irons — 4: 0.299 inCobra DS-ADAPT MAX Irons — 5: 0.264 inCobra DS-ADAPT MAX Irons — 6: 0.232 inCobra DS-ADAPT MAX Irons — 7: 0.201 inCobra DS-ADAPT MAX Irons — 8: 0.173 inCobra DS-ADAPT MAX Irons — 9: 0.146 inCobra DS-ADAPT MAX Irons — PW: 0.122 inCobra DS-ADAPT MAX Irons — GW: 0.098 inCobra DS-ADAPT MAX Irons — SW: 0.079 in

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

Specifications by option

What this record publishes. Across 9 options: loft, lie and length on every one.

9 rows, unsorted, collapsed — use the button below the table to show every option.

214RH / LH62.50.29939.25
235RH / LH630.26438.5
266RH / LH63.50.23237.75
297RH / LH640.20137.25
33.58RH / LH64.50.17336.75
38.59RH / LH650.14636.25
43.5PWRH / LH650.12236
49GWRH / LH650.09835.75
55SWRH / LH650.07935.5

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Cobra did not publish that figure — we don't estimate.

Cobra publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps Cobra's own figure verbatim.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

FigurePublishedAll irons2025Among its peers
Strongest-lofted 7-iron29°=119th of 953=17th of 61=16th of 70 Cobra irons · =108th of 208 high-handicap irons
Most offset at the 7-iron0.201"=41st of 5831st of 50=2nd of 47 Cobra irons · =29th of 155 high-handicap irons
Widest loft range34°=381st of 1,104=15th of 68=27th of 76 Cobra irons · =108th of 208 high-handicap irons
Most upright lie64°=4th of 9411st of 61=1st of 70 Cobra irons · =1st of 203 high-handicap irons
Longest37.3"=49th of 894=8th of 60=8th of 68 Cobra irons · =24th of 201 high-handicap irons

player level — derived

This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.201", 7-iron loft 29°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs Callaway Apex Ai150 · vs Wilson DYNAPWR Irons · vs Tour Edge Exotics C725 Irons

More irons

Other Cobra irons on record. Irons released in 2025 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

  • Cobra's own specs, not built yet.We haven't found Cobra's own page for this club yet — everything here comes from the sources listed at the foot of the page.
  • Published options, built.9 configurations with 4 of the 7 specs an iron can publish.
  • Stock shaft, built.Cobra names no stock shaft for this club on the sources we hold, so there's nothing to link.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 8 fields we don't hold — or tell us something here is wrong