Fujikura shaft
The Fujikura PRO is a driver/fairway shaft in 4 flexes — it weighs 56–82.5 g with 3.3–5° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
13 distinct weight-and-torque points across 13 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every driver shaft
Every driver shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Fujikura rates this shaft mid launch and mid spin — the shading is how many of the 816 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 13 flex options: weight and torque on every one; launch rating on 5 of 13 and spin rating on 8 of 13; no tip diameter and kick point at all.
13 rows, unsorted, showing the start of the table.
| R2 | Blue | 56 | 5 | 0.605 | 46 | 3 | 120 | 104 | not published | mid | firm+ | not published | firm |
| R | Blue | 57 | 4.6 | 0.61 | 46 | 3 | 110 | 96 | not published | mid | mid+ | not published | mid+ |
| S | Blue | 58 | 4.2 | 0.61 | 46 | 3 | 102 | 88 | not published | mid | soft+ | not published | soft+ |
| R | Blue | 63 | 4.1 | 0.605 | 46 | 3 | 106 | 92 | mid | mid | firm+ | not published | firm+ |
| S | Blue | 63.5 | 3.9 | 0.605 | 46 | 3 | 99 | 86 | mid | mid | firm | not published | mid+ |
| X | Blue | 64 | 3.7 | 0.605 | 46 | 3 | 94 | 82 | mid | mid | mid+ | not published | mid |
| S | Blue | 73 | 3.8 | 0.605 | 46 | 3 | 96 | 84 | mid | mid | firm+ | not published | firm+ |
| X | Blue | 75 | 3.6 | 0.61 | 46 | 3 | 92 | 80 | mid | mid | firm | not published | mid+ |
| S | Black | 63.5 | 3.8 | 0.605 | 46 | 3 | 95 | 81 | not published | not published | mid | not published | mid |
| X | Black | 64 | 3.6 | 0.605 | 46 | 3 | 90 | 76 | not published | not published | soft+ | not published | soft |
| S | Black | 73.5 | 3.7 | 0.605 | 46 | 3 | 92 | 78 | not published | not published | firm | not published | mid+ |
| X | Black | 75 | 3.5 | 0.605 | 46 | 3 | 88 | 73 | not published | not published | mid | not published | soft+ |
| X | Black | 82.5 | 3.3 | 0.605 | 46 | 3 | 86 | 70 | not published | not published | mid+ | not published | soft+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
Stock in 2 heads
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.13 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.