Wilson iron
The Wilson Staff Model CB Irons (2026) is an iron in 9 options from 20°–50°, offered with the True Temper Dynamic Gold Mid 115, RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Wilson.
This set's 7-iron is 34° — 86th percentile, weaker-lofted than 86% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Wilson Staff Model CB Irons (2026)middle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Wilson Staff Model CB Irons (2026) · 7-iron
- LOFT · X AXIS34°
- 86th percentile — weaker-lofted than 86% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62°
- 44th percentile — flatter than 56% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Wilson Staff Model CB Irons (2026) · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Wilson's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Wilson Staff Model CB Irons (2026)middle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight from the 84th to the 87th percentile.
Stock shaft: Weight on record
Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.
110 — 170 iron shaft variants · 9% of 1,910
Specifications by option
What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.
9 rows, unsorted, collapsed — use the button below the table to show every option.
| 20 | 3-iron (custom only) | RH / LH | 59.5 | 0.11 | 1 | 39.25 | D2.0 |
| 23 | 4-iron | RH / LH | 60 | 0.1 | 1 | 38.75 | D2.0 |
| 26 | 5-iron | RH / LH | 61 | 0.09 | 2 | 38.25 | D2.0 |
| 30 | 6-iron | RH / LH | 61.5 | 0.08 | 3 | 37.75 | D2.0 |
| 34 | 7-iron | RH / LH | 62 | 0.07 | 4 | 37.25 | D2.0 |
| 38 | 8-iron | RH / LH | 63 | 0.063 | 5.5 | 36.75 | D2.0 |
| 42 | 9-iron | RH / LH | 63.5 | 0.057 | 6 | 36.25 | D2.0 |
| 46 | PW | RH / LH | 64 | 0.05 | 6 | 35.75 | D2.0 |
| 50 | GW (custom only) | RH / LH | 64.25 | 0.04 | 7 | 35.5 | D2.0 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Wilson did not publish that figure — we don't estimate.
Stock shafts (1)
Every shaft Wilson lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
True Temper Dynamic Gold Mid 115 aftermarket 27 builds · 20°–50° · 3 flexes · 114–116 g
- Weight
- 114–116 g
- Flexes
- R300, S300, X100
27 rows, unsorted.
| 20 | 3-iron (custom only) | R300 | RH / LH | 114 | 59.5 | 39.25 | D2.0 |
| 20 | 3-iron (custom only) | S300 | RH / LH | 115 | 59.5 | 39.25 | D2.0 |
| 20 | 3-iron (custom only) | X100 | RH / LH | 116 | 59.5 | 39.25 | D2.0 |
| 23 | 4-iron | R300 | RH / LH | 114 | 60 | 38.75 | D2.0 |
| 23 | 4-iron | S300 | RH / LH | 115 | 60 | 38.75 | D2.0 |
| 23 | 4-iron | X100 | RH / LH | 116 | 60 | 38.75 | D2.0 |
| 26 | 5-iron | R300 | RH / LH | 114 | 61 | 38.25 | D2.0 |
| 26 | 5-iron | S300 | RH / LH | 115 | 61 | 38.25 | D2.0 |
| 26 | 5-iron | X100 | RH / LH | 116 | 61 | 38.25 | D2.0 |
| 30 | 6-iron | R300 | RH / LH | 114 | 61.5 | 37.75 | D2.0 |
| 30 | 6-iron | S300 | RH / LH | 115 | 61.5 | 37.75 | D2.0 |
| 30 | 6-iron | X100 | RH / LH | 116 | 61.5 | 37.75 | D2.0 |
| 34 | 7-iron | R300 | RH / LH | 114 | 62 | 37.25 | D2.0 |
| 34 | 7-iron | S300 | RH / LH | 115 | 62 | 37.25 | D2.0 |
| 34 | 7-iron | X100 | RH / LH | 116 | 62 | 37.25 | D2.0 |
| 38 | 8-iron | R300 | RH / LH | 114 | 63 | 36.75 | D2.0 |
| 38 | 8-iron | S300 | RH / LH | 115 | 63 | 36.75 | D2.0 |
| 38 | 8-iron | X100 | RH / LH | 116 | 63 | 36.75 | D2.0 |
| 42 | 9-iron | R300 | RH / LH | 114 | 63.5 | 36.25 | D2.0 |
| 42 | 9-iron | S300 | RH / LH | 115 | 63.5 | 36.25 | D2.0 |
| 42 | 9-iron | X100 | RH / LH | 116 | 63.5 | 36.25 | D2.0 |
| 46 | PW | R300 | RH / LH | 114 | 64 | 35.75 | D2.0 |
| 46 | PW | S300 | RH / LH | 115 | 64 | 35.75 | D2.0 |
| 46 | PW | X100 | RH / LH | 116 | 64 | 35.75 | D2.0 |
| 50 | GW (custom only) | R300 | RH / LH | 114 | 64.25 | 35.5 | D2.0 |
| 50 | GW (custom only) | S300 | RH / LH | 115 | 64.25 | 35.5 | D2.0 |
| 50 | GW (custom only) | X100 | RH / LH | 116 | 64.25 | 35.5 | D2.0 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2026 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 34° | =677th of 953 | =50th of 56 | =27th of 39 Wilson irons · =246th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.07" | =558th of 583 | 46th of 47 | =13th of 18 Wilson irons · =258th of 283 low-handicap irons |
| Widest loft range | 30° | =552nd of 1,104 | =25th of 57 | =18th of 42 Wilson irons · =191st of 508 low-handicap irons |
| Most upright lie | 62° | =539th of 941 | =35th of 56 | =2nd of 38 Wilson irons · =264th of 505 low-handicap irons |
| Longest | 37.3" | =49th of 894 | =2nd of 53 | =17th of 38 Wilson irons · =8th of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.07", 7-iron loft 34°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Honma BERES 10 3-Star Iron · vs Cobra COBRA 3DP MB Irons · vs Tour Edge Exotics CB Irons
More irons
Wilson DYNAPWR Forged Steel Irons 2026 · 19°–49° · 9 options · 1 stock shaft Wilson Staff Model Blade Irons (2026) 2026 · 20°–46° · 8 options · 1 stock shaft Wilson Staff Model XB Irons 2026 · 17°–50° · 10 options · 1 stock shaft Wilson DYNAPWR Irons 2025 · 19°–48° · 8 options · 2 stock shafts Callaway Quantum Max 2026 · 19°–55° · 10 options · 3 stock shafts Cobra BAFFLER Irons 2026 · 21°–56° · 9 options Honma BERES 10 3-Star Iron 2026 · 21°–55° · 9 options · 1 stock shaft Miura LC-930 2026 · 22°–48° · 8 options
Other Wilson irons on record. Irons released in 2026 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Wilson's own specs, partly built.Taken from Wilson's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.9 configurations with 6 of the 7 specs an iron can publish.
- Stock shaft, built.1 stock shaft, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.