Skip to content
Zomma Golf
Menu

Wilson iron

The Wilson DYNAPWR Forged Steel Irons is an iron in 9 options from 19°–49°, offered with the KBS Tour Lite, RH and LH.

9
options
19–49
loft °
1
stock shaft
18
shaft × flex options
2026
released
Built against the iron fieldpublished figures only
DIFFERENCE FROM THE MEDIAN OF EVERY RECORD WE HOLDLOFTMEDIAN 33.0°30.5° -2.5LIEMEDIAN 62.5°62.0° -0.5LENGTHMEDIAN 37.00"37.25" +0.25OFFSETMEDIAN 0.115"0.095" -0.02
Each bar is this club's published figure minus the median of the 1,084 other irons on record that publish it — a median over the records we hold.

View on Wilson →

Where this club lands

Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Wilson.

This set's 7-iron is 30.5° — 35th percentile, stronger-lofted than 65% of the 889 sets that publish one. The median is 32°.

Loft ladder against the field

Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.

Wilson DYNAPWR Forged Steel Ironsmiddle half of the field
2030405060123456789PWGW/AWSWLWLOFT (°)Wilson DYNAPWR Forged Steel Irons — 3: 19°Wilson DYNAPWR Forged Steel Irons — 4: 21.5°Wilson DYNAPWR Forged Steel Irons — 5: 24.5°Wilson DYNAPWR Forged Steel Irons — 6: 27.5°Wilson DYNAPWR Forged Steel Irons — 7: 30.5°Wilson DYNAPWR Forged Steel Irons — 8: 34.5°Wilson DYNAPWR Forged Steel Irons — 9: 39°Wilson DYNAPWR Forged Steel Irons — PW: 44°Wilson DYNAPWR Forged Steel Irons — GW: 49°

A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The head half

Read the set through

Wilson DYNAPWR Forged Steel Irons · 7-iron

LOFT · X AXIS30.5°
35th percentile — stronger-lofted than 65% of the 889 sets that publish a 7-iron
LIE · Y AXIS62°
44th percentile — flatter than 56% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie

The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.

Offset

Published offset of 0.095 in: the leading edge sits 0.095 in behind the line of the shaft, against a median of 0.12 in for the 7-iron of 580 iron sets on record that publish one.MEDIAN 0.12 inOFFSET 0.095 inSHAFTLEADING EDGE0.25 INLEADING EDGE BEHIND THE SHAFTNOMINAL OUTLINE · SEEN FROM THE TOE · TRUE SCALE

Wilson DYNAPWR Forged Steel Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.

Offset through the set, against the field

Wilson's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.

Wilson DYNAPWR Forged Steel Ironsmiddle half of the field
0.050.10.150.223456789PWGW/AWSWLWOFFSET (IN)Wilson DYNAPWR Forged Steel Irons — 3: 0.15 inWilson DYNAPWR Forged Steel Irons — 4: 0.14 inWilson DYNAPWR Forged Steel Irons — 5: 0.13 inWilson DYNAPWR Forged Steel Irons — 6: 0.117 inWilson DYNAPWR Forged Steel Irons — 7: 0.095 inWilson DYNAPWR Forged Steel Irons — 8: 0.084 inWilson DYNAPWR Forged Steel Irons — 9: 0.067 inWilson DYNAPWR Forged Steel Irons — PW: 0.045 inWilson DYNAPWR Forged Steel Irons — GW: 0.035 in

A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.

The stock-shaft half

Stock shaft build

Across every build: this club's stock shafts run weight from the 65th to the 69th percentile.

Stock shaft: Weight on record

Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.

30: 883040: 1411414050: 1821825060: 2572576070: 2412417080: 1991998090: 25125190100: 241241100110: 170170110120: 163163120130: 5757130SHAFT VARIANTSWEIGHT (G)

90 — 251 iron shaft variants · 13% of 1,910

Specifications by option

What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.

9 rows, unsorted, collapsed — use the button below the table to show every option.

193-ironRH / LH59.50.152.539.25D2.0
21.54-ironRH / LH600.14338.75D2.0
24.55-ironRH / LH610.133.538.25D2.0
27.56-ironRH / LH61.50.1174.537.75D2.0
30.57-ironRH / LH620.095537.25D2.0
34.58-ironRH / LH630.0845.536.75D2.0
399-ironRH / LH63.50.0676.536.25D2.0
44PWRH / LH640.045735.75D2.0
49GWRH / LH640.035835.5D2.0

Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Wilson did not publish that figure — we don't estimate.

Stock shafts (1)

Every shaft Wilson lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.

KBS Tour Lite aftermarket 18 builds · 19°–49° · 2 flexes · 95–100 g
Weight
95–100 g
Launch
high
Spin
high
Flexes
R, S

18 rows, unsorted.

193-ironRRH / LH9559.539.25D2.0
193-ironSRH / LH10059.539.25D2.0
21.54-ironRRH / LH956038.75D2.0
21.54-ironSRH / LH1006038.75D2.0
24.55-ironRRH / LH956138.25D2.0
24.55-ironSRH / LH1006138.25D2.0
27.56-ironRRH / LH9561.537.75D2.0
27.56-ironSRH / LH10061.537.75D2.0
30.57-ironRRH / LH956237.25D2.0
30.57-ironSRH / LH1006237.25D2.0
34.58-ironRRH / LH956336.75D2.0
34.58-ironSRH / LH1006336.75D2.0
399-ironRRH / LH9563.536.25D2.0
399-ironSRH / LH10063.536.25D2.0
44PWRRH / LH956435.75D2.0
44PWSRH / LH1006435.75D2.0
49GWRRH / LH956435.5D2.0
49GWSRH / LH1006435.5D2.0

Full specs for KBS Tour Lite →

Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.

Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:

  • STOCK SHAFT: neither of the two forged-iron spec-content fragments found on wilson.com (the current '2026-dynapwr-forged-irons' or the orphaned older 'spec-dynapwr-irons-forged') names a shaft brand/model -- mapped to KBS Tour Lite (R/S, .355 tip) via third-party 2026 DYNAPWR Forged coverage (independent reviews naming 'KBS Tour Lite' as the stock steel shaft), matched to the existing real record kbs/tour-lite.json.
  • Flagged as the lowest-confidence stock-shaft mapping in this batch since it isn't drawn from wilson.com's own page text.

Measured against comparable clubs

Where this club's published fitting specs sit among comparable clubs — never how good it is.

FigurePublishedAll irons2026Among its peers
Strongest-lofted 7-iron30.5°=296th of 953=29th of 56=13th of 39 Wilson irons · =19th of 508 low-handicap irons
Most offset at the 7-iron0.095"465th of 58333rd of 4710th of 18 Wilson irons · 165th of 283 low-handicap irons
Widest loft range30°=552nd of 1,104=25th of 57=18th of 42 Wilson irons · =191st of 508 low-handicap irons
Most upright lie62°=539th of 941=35th of 56=2nd of 38 Wilson irons · =264th of 505 low-handicap irons
Longest37.3"=49th of 894=2nd of 53=17th of 38 Wilson irons · =8th of 466 low-handicap irons

player level — derived

This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.095", 7-iron loft 30.5°. A design classification, not a rule about who may play it. How the bands are read →

Compare this iron →

Or go straight to a comparison: vs Honma BERES 10 3-Star Iron · vs Cobra COBRA 3DP MB Irons · vs Tour Edge Exotics CB Irons

More irons

Other Wilson irons on record. Irons released in 2026 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →

What's on this page

In progress2 of 3 built

2 of 3 parts of this club page are built, and we're filling in the rest.

  • Wilson's own specs, partly built.Taken from Wilson's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
  • Published options, built.9 configurations with 6 of the 7 specs an iron can publish.
  • Stock shaft, built.1 stock shaft, each with its own specced page.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this club? 3 fields we don't hold — or tell us something here is wrong