TaylorMade iron
The TaylorMade P∙7CB Irons is an iron in 10 options from 20°–51°, offered with the True Temper Dynamic Gold Mid 115, RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just TaylorMade.
This set's 7-iron is 33° — 72nd percentile, weaker-lofted than 72% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
TaylorMade P∙7CB Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
TaylorMade P∙7CB Irons · 7-iron
- LOFT · X AXIS33°
- 72nd percentile — weaker-lofted than 72% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight at the 87th percentile.
Stock shaft: Weight on record
Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.
110 — 170 iron shaft variants · 9% of 1,910
Specifications by option
What this record publishes. Across 10 options: loft, lie, length and swingweight on every one.
10 rows, unsorted, collapsed — use the button below the table to show every option.
| 20 | 3-iron | RH / LH | 60.5 | 39 | D3 |
| 23 | 4-iron | RH / LH | 61 | 38.5 | D3 |
| 26 | 5-iron | RH / LH | 61.5 | 38 | D3 |
| 29 | 6-iron | RH / LH | 62 | 37.5 | D3 |
| 33 | 7-iron | RH / LH | 62.5 | 37 | D3 |
| 37 | 8-iron | RH / LH | 63 | 36.5 | D3 |
| 41 | 9-iron | RH / LH | 63.5 | 36 | D3 |
| 46 | PW | RH / LH | 64 | 35.75 | D4 |
| 51 | AW | RH | 64 | 35.5 | D4 |
| 51 | GW | RH | 64 | 35.5 | D4 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.
Stock shafts (1)
Every shaft TaylorMade lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
True Temper Dynamic Gold Mid 115 aftermarket 20 builds · 20°–51° · 2 flexes · 115–116 g
- Weight
- 115–116 g
- Flexes
- Stiff, X-Stiff
20 rows, unsorted.
| 20 | 3-iron | Stiff | RH / LH | 115 | 60.5 | 39 | D3 |
| 20 | 3-iron | X-Stiff | RH / LH | 116 | 60.5 | 39 | D3 |
| 23 | 4-iron | Stiff | RH / LH | 115 | 61 | 38.5 | D3 |
| 23 | 4-iron | X-Stiff | RH / LH | 116 | 61 | 38.5 | D3 |
| 26 | 5-iron | Stiff | RH / LH | 115 | 61.5 | 38 | D3 |
| 26 | 5-iron | X-Stiff | RH / LH | 116 | 61.5 | 38 | D3 |
| 29 | 6-iron | Stiff | RH / LH | 115 | 62 | 37.5 | D3 |
| 29 | 6-iron | X-Stiff | RH / LH | 116 | 62 | 37.5 | D3 |
| 33 | 7-iron | Stiff | RH / LH | 115 | 62.5 | 37 | D3 |
| 33 | 7-iron | X-Stiff | RH / LH | 116 | 62.5 | 37 | D3 |
| 37 | 8-iron | Stiff | RH / LH | 115 | 63 | 36.5 | D3 |
| 37 | 8-iron | X-Stiff | RH / LH | 116 | 63 | 36.5 | D3 |
| 41 | 9-iron | Stiff | RH / LH | 115 | 63.5 | 36 | D3 |
| 41 | 9-iron | X-Stiff | RH / LH | 116 | 63.5 | 36 | D3 |
| 46 | PW | Stiff | RH / LH | 115 | 64 | 35.75 | D4 |
| 46 | PW | X-Stiff | RH / LH | 116 | 64 | 35.75 | D4 |
| 51 | AW | Stiff | RH | 115 | 64 | 35.5 | D4 |
| 51 | GW | Stiff | RH | 115 | 64 | 35.5 | D4 |
| 51 | AW | X-Stiff | RH | 116 | 64 | 35.5 | D4 |
| 51 | GW | X-Stiff | RH | 116 | 64 | 35.5 | D4 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:
- Stock shaft: True Temper Dynamic Gold Mid 115 (Stiff/X-Stiff), linked directly (see p770-irons note for rationale).
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2024 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 33° | =568th of 953 | =32nd of 47 | =52nd of 86 TaylorMade irons · =147th of 508 low-handicap irons |
| Widest loft range | 31° | =496th of 1,104 | =20th of 53 | =59th of 89 TaylorMade irons · =162nd of 508 low-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | =5th of 46 | =40th of 83 TaylorMade irons · =88th of 505 low-handicap irons |
| Longest | 37" | =265th of 894 | =26th of 47 | =17th of 85 TaylorMade irons · =83rd of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron loft 33° (no offset published). A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Bridgestone 220 MB · vs New Level 702 CB · vs Callaway Apex Ai200
More irons
TaylorMade Kalea Gold Women's Irons 2024 · 27°–55° · 7 options · 1 stock shaft TaylorMade P∙770 Irons 2024 · 19°–50° · 9 options · 1 stock shaft TaylorMade P∙770/P∙7CB Combo Sets 2024 · 4 options · 1 stock shaft TaylorMade P∙DHY Utility Iron 2024 · 18°–22° · 3 options · 1 stock shaft Ben Hogan PTx Tour Irons 2024 · 21.5°–45.5° · 7 options · 2 stock shafts Bridgestone 220 MB 2024 · 7 options · 1 stock shaft Callaway Apex Ai200 2024 · 21°–48° · 8 options · 2 stock shafts Cobra Darkspeed Iron Set 2024 · 18.5°–54° · 9 options
Other TaylorMade irons on record. Irons released in 2024 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- TaylorMade's own specs, partly built.Taken from TaylorMade's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.10 configurations with 4 of the 7 specs an iron can publish.
- Stock shaft, built.1 stock shaft, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.