TaylorMade iron
The TaylorMade M1 Iron Set is an iron in 10 options from 18°–55°.
Built against the iron fieldpublished figures only
Image not published
Where this club lands
The field is every iron in the database that publishes both of the chart's figures — every brand, not just TaylorMade.
This set's 7-iron is 30.5° — 35th percentile, stronger-lofted than 65% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
TaylorMade M1 Iron Setmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
TaylorMade M1 Iron Set · 7 Iron
- LOFT · X AXIS30.5°
- 35th percentile — stronger-lofted than 65% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
TaylorMade M1 Iron Set · 7 Iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
TaylorMade's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
TaylorMade M1 Iron Setmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
Specifications by option
What this record publishes. Across 10 options: loft, lie, length and swingweight on every one.
10 rows, unsorted, collapsed — use the button below the table to show every option.
| 18 | 3 Iron | 60.5 | 0.157 | 38.75 | D2 |
| 20.5 | 4 Iron | 61 | 0.15 | 38.25 | D2 |
| 23 | 5 Iron | 61.5 | 0.138 | 37.75 | D2 |
| 26.5 | 6 Iron | 62 | 0.126 | 37.25 | D2 |
| 30.5 | 7 Iron | 62.5 | 0.114 | 36.75 | D2 |
| 35 | 8 Iron | 63 | 0.102 | 36.25 | D2 |
| 40 | 9 Iron | 63.5 | 0.102 | 35.75 | D2 |
| 45 | PW | 64 | 0.091 | 35.5 | D2 |
| 50 | AW | 64 | 0.079 | 35.5 | D3 |
| 55 | SW | 64.5 | 0.063 | 35.25 | D3 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.
TaylorMade publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps TaylorMade's own figure verbatim.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2017 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 30.5° | =296th of 953 | too few comparable clubs to place | =24th of 86 TaylorMade irons · =19th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.114" | =319th of 583 | too few comparable clubs to place | =48th of 68 TaylorMade irons · =20th of 283 low-handicap irons |
| Widest loft range | 37° | =227th of 1,104 | too few comparable clubs to place | =35th of 89 TaylorMade irons · =84th of 508 low-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | too few comparable clubs to place | =40th of 83 TaylorMade irons · =88th of 505 low-handicap irons |
| Longest | 36.8" | =700th of 894 | too few comparable clubs to place | =49th of 85 TaylorMade irons · =345th of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.114", 7-iron loft 30.5°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Cobra F-Max Iron Set · vs PING G400 Iron Set · vs Callaway Rogue Pro Iron Set
More irons
TaylorMade M2 Iron Set 2016 · 19°–60° · 10 options TaylorMade M3 Iron Set 2018 · 18°–55° · 10 options TaylorMade M4 Iron Set 2018 · 21.5°–49° · 7 options TaylorMade P∙7TW Irons 2019 · 21°–47° · 8 options TaylorMade RSi TP Iron Set 2015 · 17°–47° · 9 options Cobra F-Max Iron Set 2017 · 22°–55° · 9 options Miura CB-1008 discontinued 2017 · 8 options PING G400 Iron Set 2017 · 20.5°–58° · 10 options
Other TaylorMade irons on record. Irons released in 2017 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- TaylorMade's own specs, not built yet.We haven't found TaylorMade's own page for this club yet — everything here comes from the sources listed at the foot of the page.
- Published options, built.10 configurations with 5 of the 7 specs an iron can publish.
- Stock shaft, built.TaylorMade names no stock shaft for this club on the sources we hold, so there's nothing to link.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.