TaylorMade iron
The TaylorMade P∙7TW Irons is an iron in 8 options from 21°–47°, RH (assumed).
Built against the iron fieldpublished figures only
Where this club lands
The field is every iron in the database that publishes both of the chart's figures — every brand, not just TaylorMade.
This set's 7-iron is 35° — 95th percentile, weaker-lofted than 95% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
TaylorMade P∙7TW Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
TaylorMade P∙7TW Irons · 7-iron
- LOFT · X AXIS35°
- 95th percentile — weaker-lofted than 95% of the 889 sets that publish a 7-iron
- LIE · Y AXIS61.5°
- 11th percentile — flatter than 89% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
TaylorMade P∙7TW Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
TaylorMade's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
TaylorMade P∙7TW Ironsmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
Specifications by option
What this record publishes. Across 8 options: loft, lie, length and swingweight on every one.
8 rows, unsorted.
| 21 | 3-iron | 59.5 | 0.091 | 39 | D3 | 0.091 | 2.3 |
| 24 | 4-iron | 60 | 0.075 | 38.5 | D3 | 0.075 | 1.9 |
| 27 | 5-iron | 60.5 | 0.075 | 38 | D3 | 0.075 | 1.9 |
| 31 | 6-iron | 61 | 0.071 | 37.5 | D3 | 0.071 | 1.8 |
| 35 | 7-iron | 61.5 | 0.055 | 37 | D3 | 0.055 | 1.4 |
| 39 | 8-iron | 62.5 | 0.047 | 36.5 | D3 | 0.047 | 1.2 |
| 43 | 9-iron | 63 | 0.051 | 36 | D3 | 0.051 | 1.3 |
| 47 | PW | 63.5 | 0.028 | 35.75 | D3 | 0.028 | 0.7 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.
TaylorMade publishes offset in millimetres; the offset (in) column is that figure converted, and TaylorMade's own is in the column beside it.
TaylorMade publishes offset in millimetres. The (in) column is that figure converted at 25.4 mm to the inch, and TaylorMade's own millimetre column sits beside it — neither is dropped, so the published figure is always on the page.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2019 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 35° | =838th of 953 | too few comparable clubs to place | =73rd of 86 TaylorMade irons · =396th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.055" | 576th of 583 | too few comparable clubs to place | 67th of 68 TaylorMade irons · 276th of 283 low-handicap irons |
| Widest loft range | 26° | =813th of 1,104 | too few comparable clubs to place | =84th of 89 TaylorMade irons · =339th of 508 low-handicap irons |
| Most upright lie | 61.5° | =835th of 941 | too few comparable clubs to place | =77th of 83 TaylorMade irons · =439th of 505 low-handicap irons |
| Longest | 37" | =265th of 894 | too few comparable clubs to place | =17th of 85 TaylorMade irons · =83rd of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.055", 7-iron loft 35°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Titleist 620 CB · vs Callaway EPIC Forged Iron Set · vs Ben Hogan PTx Pro Irons
More irons
TaylorMade M3 Iron Set 2018 · 18°–55° · 10 options TaylorMade M4 Iron Set 2018 · 21.5°–49° · 7 options TaylorMade P∙770 Irons (2020) discontinued 2020 · 19.5°–51° · 9 options TaylorMade SIM Max Irons discontinued 2020 · 19°–58° · 10 options Ben Hogan PTx Pro Irons 2019 · 22°–46° · 7 options · 2 stock shafts Callaway EPIC Forged Iron Set 2019 · 18°–56° · 10 options Cleveland Launcher UHX Irons discontinued 2019 · 20°–44° · 7 options Honma T//World-X Iron (TW-X) discontinued 2019 · 18°–49° · 2 options
Other TaylorMade irons on record. Irons released in 2019 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- TaylorMade's own specs, partly built.Taken from TaylorMade's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.8 configurations with 5 of the 7 specs an iron can publish.
- Stock shaft, built.TaylorMade names no stock shaft for this club on the sources we hold, so there's nothing to link.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.