Cobra iron
The Cobra KING Irons is an iron in 9 options from 19°–54°, offered with 2 stock shafts, RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Cobra.
This set's 7-iron is 27.5° — 8th percentile, stronger-lofted than 92% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Cobra KING Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Cobra KING Irons · 7
- LOFT · X AXIS27.5°
- 8th percentile — stronger-lofted than 92% of the 889 sets that publish a 7-iron
- LIE · Y AXIS63.5°
- 100th percentile — the highest of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Cobra KING Irons · 7 — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Cobra's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Cobra KING Ironsmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight from the 27th to the 74th percentile.
Stock shaft: Weight on record
Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.
60 — 257 iron shaft variants · 13% of 1,910
Specifications by option
What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.
9 rows, unsorted, collapsed — use the button below the table to show every option.
| 19 | 4 | RH / LH | 62 | 0.213 | 39.25 | D2.5 (steel) |
| 21.5 | 5 | RH / LH | 62.5 | 0.181 | 38.5 | D2.5 (steel) |
| 24.5 | 6 | RH / LH | 63 | 0.154 | 37.75 | D2.5 (steel) |
| 27.5 | 7 | RH / LH | 63.5 | 0.126 | 37.25 | D2.5 (steel) |
| 32 | 8 | RH / LH | 64 | 0.106 | 36.75 | D2.5 (steel) |
| 37 | 9 | RH / LH | 64.5 | 0.083 | 36.25 | D2.5 (steel) |
| 42.5 | PW | RH / LH | 65 | 0.063 | 36 | D2.5 (steel) |
| 48 | GW | RH / LH | 65 | 0.043 | 35.75 | D2.5 (steel) |
| 54 | SW | RH / LH | 65 | 0.043 | 35.5 | D2.5 (steel) |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Cobra did not publish that figure — we don't estimate.
Cobra publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps Cobra's own figure verbatim.
Stock shafts (2)
Every shaft Cobra lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
KBS PGI (COBRA Stock) made-for 27 builds · 19°–54° · 3 flexes · 65–85 g
- Weight
- 65–85 g
- Flexes
- A, R, S
27 rows, unsorted.
| 19 | 4 | A | RH / LH | 65 | 62 | 39.25 | D2.5 (steel) |
| 19 | 4 | R | RH / LH | 75 | 62 | 39.25 | D2.5 (steel) |
| 19 | 4 | S | RH / LH | 85 | 62 | 39.25 | D2.5 (steel) |
| 21.5 | 5 | A | RH / LH | 65 | 62.5 | 38.5 | D2.5 (steel) |
| 21.5 | 5 | R | RH / LH | 75 | 62.5 | 38.5 | D2.5 (steel) |
| 21.5 | 5 | S | RH / LH | 85 | 62.5 | 38.5 | D2.5 (steel) |
| 24.5 | 6 | A | RH / LH | 65 | 63 | 37.75 | D2.5 (steel) |
| 24.5 | 6 | R | RH / LH | 75 | 63 | 37.75 | D2.5 (steel) |
| 24.5 | 6 | S | RH / LH | 85 | 63 | 37.75 | D2.5 (steel) |
| 27.5 | 7 | A | RH / LH | 65 | 63.5 | 37.25 | D2.5 (steel) |
| 27.5 | 7 | R | RH / LH | 75 | 63.5 | 37.25 | D2.5 (steel) |
| 27.5 | 7 | S | RH / LH | 85 | 63.5 | 37.25 | D2.5 (steel) |
| 32 | 8 | A | RH / LH | 65 | 64 | 36.75 | D2.5 (steel) |
| 32 | 8 | R | RH / LH | 75 | 64 | 36.75 | D2.5 (steel) |
| 32 | 8 | S | RH / LH | 85 | 64 | 36.75 | D2.5 (steel) |
| 37 | 9 | A | RH / LH | 65 | 64.5 | 36.25 | D2.5 (steel) |
| 37 | 9 | R | RH / LH | 75 | 64.5 | 36.25 | D2.5 (steel) |
| 37 | 9 | S | RH / LH | 85 | 64.5 | 36.25 | D2.5 (steel) |
| 42.5 | PW | A | RH / LH | 65 | 65 | 36 | D2.5 (steel) |
| 42.5 | PW | R | RH / LH | 75 | 65 | 36 | D2.5 (steel) |
| 42.5 | PW | S | RH / LH | 85 | 65 | 36 | D2.5 (steel) |
| 48 | GW | A | RH / LH | 65 | 65 | 35.75 | D2.5 (steel) |
| 48 | GW | R | RH / LH | 75 | 65 | 35.75 | D2.5 (steel) |
| 48 | GW | S | RH / LH | 85 | 65 | 35.75 | D2.5 (steel) |
| 54 | SW | A | RH / LH | 65 | 65 | 35.5 | D2.5 (steel) |
| 54 | SW | R | RH / LH | 75 | 65 | 35.5 | D2.5 (steel) |
| 54 | SW | S | RH / LH | 85 | 65 | 35.5 | D2.5 (steel) |
KBS Tour Lite (COBRA Stock) made-for 18 builds · 19°–54° · 2 flexes · 105 g
- Weight
- 105 g
- Spin
- mid
- Flexes
- R, S
18 rows, unsorted.
| 19 | 4 | R | RH / LH | 105 | 62 | 39.25 | D2.5 (steel) |
| 19 | 4 | S | RH / LH | 105 | 62 | 39.25 | D2.5 (steel) |
| 21.5 | 5 | R | RH / LH | 105 | 62.5 | 38.5 | D2.5 (steel) |
| 21.5 | 5 | S | RH / LH | 105 | 62.5 | 38.5 | D2.5 (steel) |
| 24.5 | 6 | R | RH / LH | 105 | 63 | 37.75 | D2.5 (steel) |
| 24.5 | 6 | S | RH / LH | 105 | 63 | 37.75 | D2.5 (steel) |
| 27.5 | 7 | R | RH / LH | 105 | 63.5 | 37.25 | D2.5 (steel) |
| 27.5 | 7 | S | RH / LH | 105 | 63.5 | 37.25 | D2.5 (steel) |
| 32 | 8 | R | RH / LH | 105 | 64 | 36.75 | D2.5 (steel) |
| 32 | 8 | S | RH / LH | 105 | 64 | 36.75 | D2.5 (steel) |
| 37 | 9 | R | RH / LH | 105 | 64.5 | 36.25 | D2.5 (steel) |
| 37 | 9 | S | RH / LH | 105 | 64.5 | 36.25 | D2.5 (steel) |
| 42.5 | PW | R | RH / LH | 105 | 65 | 36 | D2.5 (steel) |
| 42.5 | PW | S | RH / LH | 105 | 65 | 36 | D2.5 (steel) |
| 48 | GW | R | RH / LH | 105 | 65 | 35.75 | D2.5 (steel) |
| 48 | GW | S | RH / LH | 105 | 65 | 35.75 | D2.5 (steel) |
| 54 | SW | R | RH / LH | 105 | 65 | 35.5 | D2.5 (steel) |
| 54 | SW | S | RH / LH | 105 | 65 | 35.5 | D2.5 (steel) |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2026 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 27.5° | =50th of 953 | 5th of 56 | =13th of 70 Cobra irons · =50th of 208 high-handicap irons |
| Most offset at the 7-iron | 0.126" | =242nd of 583 | =22nd of 47 | =11th of 47 Cobra irons · =137th of 155 high-handicap irons |
| Widest loft range | 35° | =325th of 1,104 | =6th of 57 | =14th of 76 Cobra irons · =80th of 208 high-handicap irons |
| Most upright lie | 63.5° | =8th of 941 | =3rd of 56 | =5th of 70 Cobra irons · =4th of 203 high-handicap irons |
| Longest | 37.3" | =49th of 894 | =2nd of 53 | =8th of 68 Cobra irons · =24th of 201 high-handicap irons |
player level — derived
This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.126", 7-iron loft 27.5° (strong distance loft). A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Honma BERES 10 3-Star Iron · vs Wilson DYNAPWR Forged Steel Irons · vs Tour Edge Exotics CB Irons
More irons
Cobra BAFFLER Irons 2026 · 21°–56° · 9 options Cobra COBRA 3DP MB Irons 2026 · 24°–50° · 8 options · 1 stock shaft Cobra COBRA 3DP X Irons 2026 · 20°–48° · 8 options · 1 stock shaft Cobra KING MAX Irons 2026 · 21°–56° · 9 options · 2 stock shafts Callaway Quantum Max 2026 · 19°–55° · 10 options · 3 stock shafts Honma BERES 10 3-Star Iron 2026 · 21°–55° · 9 options · 1 stock shaft Miura LC-930 2026 · 22°–48° · 8 options Mizuno Mizuno Pro M-13 2026 · 22°–48° · 8 options · 4 stock shafts
Other Cobra irons on record. Irons released in 2026 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Cobra's own specs, partly built.Taken from Cobra's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.9 configurations with 5 of the 7 specs an iron can publish.
- Stock shaft, built.2 stock shafts, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.