Cobra iron
The Cobra KING CB/MB Irons is an iron in 9 options from 21°–50°, offered with the KBS C-Taper (COBRA Stock), RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Cobra.
This set's 7-iron is 34° — 86th percentile, weaker-lofted than 86% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Cobra KING CB/MB Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Cobra KING CB/MB Irons · 7
- LOFT · X AXIS34°
- 86th percentile — weaker-lofted than 86% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62°
- 44th percentile — flatter than 56% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
This record publishes 3 separate offsets (offset_in, Offset (MB), Offset (CB)). They are all in the table above; nothing is drawn, because there is no single figure to draw.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight at the 91st percentile.
Stock shaft: Weight on record
Every iron shaft variant on record publishing a weight — 1,910 of them, counted into 11 bars.
120 — 163 iron shaft variants · 9% of 1,910
Specifications by option
What this record publishes. Across 9 options: loft, lie, length and swingweight on every one.
9 rows, unsorted, collapsed — use the button below the table to show every option.
| 21 | 3 | RH / LH | 60 | 39.25 | D2 (steel) | 0.0906 | 0.0984 | 2.3 / 2.5 | S, R |
| 24 | 4 | RH / LH | 60.5 | 38.75 | D2 (steel) | 0.0787 | 0.0906 | 2.0 / 2.3 | S, R |
| 27 | 5 | RH / LH | 61 | 38.25 | D2 (steel) | 0.0709 | 0.0787 | 1.8 / 2.0 | S, R |
| 30 | 6 | RH / LH | 61.5 | 37.75 | D2 (steel) | 0.0591 | 0.0709 | 1.5 / 1.8 | S, R |
| 34 | 7 | RH / LH | 62 | 37.25 | D2 (steel) | 0.0512 | 0.0591 | 1.3 / 1.5 | S, R |
| 38 | 8 | RH / LH | 62.5 | 36.75 | D2 (steel) | 0.0512 | 0.0512 | 1.3 / 1.3 | S, R |
| 42 | 9 | RH / LH | 63 | 36.25 | D2 (steel) | 0.0512 | 0.0512 | 1.3 / 1.3 | S, R |
| 46 | PW | RH / LH | 63.5 | 36 | D3 (steel) | 0.0512 | 0.0512 | 1.3 / 1.3 | S, R |
| 50 | GW | RH / LH | 63.5 | 35.75 | D3 (steel) | 0.0512 | 0.0512 | 1.3 / 1.3 | S, R |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Cobra did not publish that figure — we don't estimate.
Stock shafts (1)
Every shaft Cobra lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
KBS C-Taper (COBRA Stock) made-for 18 builds · 21°–50° · 2 flexes · 120 g
- Weight
- 120 g
- Launch
- low
- Spin
- low
- Flexes
- R, S
18 rows, unsorted.
| 21 | 3 | R | RH / LH | 120 | 60 | 39.25 | D2 (steel) |
| 21 | 3 | S | RH / LH | 120 | 60 | 39.25 | D2 (steel) |
| 24 | 4 | R | RH / LH | 120 | 60.5 | 38.75 | D2 (steel) |
| 24 | 4 | S | RH / LH | 120 | 60.5 | 38.75 | D2 (steel) |
| 27 | 5 | R | RH / LH | 120 | 61 | 38.25 | D2 (steel) |
| 27 | 5 | S | RH / LH | 120 | 61 | 38.25 | D2 (steel) |
| 30 | 6 | R | RH / LH | 120 | 61.5 | 37.75 | D2 (steel) |
| 30 | 6 | S | RH / LH | 120 | 61.5 | 37.75 | D2 (steel) |
| 34 | 7 | R | RH / LH | 120 | 62 | 37.25 | D2 (steel) |
| 34 | 7 | S | RH / LH | 120 | 62 | 37.25 | D2 (steel) |
| 38 | 8 | R | RH / LH | 120 | 62.5 | 36.75 | D2 (steel) |
| 38 | 8 | S | RH / LH | 120 | 62.5 | 36.75 | D2 (steel) |
| 42 | 9 | R | RH / LH | 120 | 63 | 36.25 | D2 (steel) |
| 42 | 9 | S | RH / LH | 120 | 63 | 36.25 | D2 (steel) |
| 46 | PW | R | RH / LH | 120 | 63.5 | 36 | D3 (steel) |
| 46 | PW | S | RH / LH | 120 | 63.5 | 36 | D3 (steel) |
| 50 | GW | R | RH / LH | 120 | 63.5 | 35.75 | D3 (steel) |
| 50 | GW | S | RH / LH | 120 | 63.5 | 35.75 | D3 (steel) |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Also stated on the record, verbatim — shafts we hold no matching record for, so they are quoted rather than linked:
- Only one stock shaft is published (KBS C-Taper, steel, S/R, 120g).
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2023 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 34° | =677th of 953 | =32nd of 35 | =62nd of 70 Cobra irons · =246th of 508 low-handicap irons |
| Widest loft range | 29° | =629th of 1,104 | =24th of 42 | =51st of 76 Cobra irons · =241st of 508 low-handicap irons |
| Most upright lie | 62° | =539th of 941 | =17th of 34 | =61st of 70 Cobra irons · =264th of 505 low-handicap irons |
| Longest | 37.3" | =49th of 894 | =1st of 34 | =8th of 68 Cobra irons · =8th of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron loft 34° (no offset published). A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Callaway Big Bertha · vs Miura CB-302 · vs Srixon Z-Forged II Irons
More irons
Cobra Aerojet Iron Set 2023 · 18.5°–54° · 9 options Cobra Aerojet One Length Iron Set 2023 · 24°–47° · 6 options Cobra KING TEC Utility Irons 2023 · 17°–25° · 5 options · 2 stock shafts Cobra KING Tour Irons 2023 · 19°–48° · 9 options · 1 stock shaft Callaway Big Bertha 2023 · 18°–56° · 10 options · 2 stock shafts Miura CB-302 2023 · 22°–48° · 8 options Mizuno JPX923 Forged discontinued 2023 · 21°–49° · 8 options New Level 480-DB discontinued 2023 · 24°–45° · 7 options
Other Cobra irons on record. Irons released in 2023 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Cobra's own specs, partly built.Taken from Cobra's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.9 configurations with 4 of the 7 specs an iron can publish.
- Stock shaft, built.1 stock shaft, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.