Callaway iron
The Callaway Apex Ai300 iron is an iron in 8 options from 20°–47°, offered with 2 stock shafts, RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
Two separate readings, because a club is two products. Each field is every iron in the database that publishes both of that chart's figures — every brand, not just Callaway.
This set's 7-iron is 29° — 19th percentile, stronger-lofted than 81% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Callaway Apex Ai300middle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Callaway Apex Ai300 · 7-iron
- LOFT · X AXIS29°
- 19th percentile — stronger-lofted than 81% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.25°
- 47th percentile — flatter than 53% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Callaway Apex Ai300 · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Callaway's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Callaway Apex Ai300middle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The stock-shaft half
Stock shaft build
Across every build: this club's stock shafts run weight from the 24th to the 33rd percentile, and torque from the 90th to the 93rd percentile.
Stock shaft: Weight against Torque
The cloud is every iron shaft variant on record that publishes both weight and torque — 1,534 of them, binned by density.
Specifications by option
What this record publishes. Across 8 options: loft, lie and length on every one.
8 rows, unsorted.
| 20 | 4-iron | RH / LH | 60.375 | 0.201 | 39.125 | 5.1 |
| 22 | 5-iron | RH / LH | 61 | 0.189 | 38.5 | 4.8 |
| 25 | 6-iron | RH / LH | 61.625 | 0.177 | 37.875 | 4.5 |
| 29 | 7-iron | RH / LH | 62.25 | 0.157 | 37.25 | 4 |
| 33 | 8-iron | RH / LH | 62.875 | 0.142 | 36.625 | 3.6 |
| 37 | 9-iron | RH / LH | 63.5 | 0.118 | 36 | 3 |
| 42 | PW | RH / LH | 63.75 | 0.094 | 35.75 | 2.4 |
| 47 | AW | RH / LH | 64 | 0.071 | 35.5 | 1.8 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Callaway did not publish that figure — we don't estimate.
Callaway publishes offset in millimetres; the offset (in) column is that figure converted, and Callaway's own is in the column beside it.
Stock shafts (2)
Every shaft Callaway lists as stock for this club, each with its own flexes, weight and torque. Open one for its full loft × flex build table.
True Temper Dynamic Gold Mid 90 aftermarket 16 builds · 20°–47° · 2 flexes · 99–100 g
- Weight
- 99–100 g
- Flexes
- Regular, Stiff
16 rows, unsorted.
| 20 | 4-iron | Regular | RH / LH | 99 | 60.375 | 39.125 |
| 20 | 4-iron | Stiff | RH / LH | 100 | 60.375 | 39.125 |
| 22 | 5-iron | Regular | RH / LH | 99 | 61 | 38.5 |
| 22 | 5-iron | Stiff | RH / LH | 100 | 61 | 38.5 |
| 25 | 6-iron | Regular | RH / LH | 99 | 61.625 | 37.875 |
| 25 | 6-iron | Stiff | RH / LH | 100 | 61.625 | 37.875 |
| 29 | 7-iron | Regular | RH / LH | 99 | 62.25 | 37.25 |
| 29 | 7-iron | Stiff | RH / LH | 100 | 62.25 | 37.25 |
| 33 | 8-iron | Regular | RH / LH | 99 | 62.875 | 36.625 |
| 33 | 8-iron | Stiff | RH / LH | 100 | 62.875 | 36.625 |
| 37 | 9-iron | Regular | RH / LH | 99 | 63.5 | 36 |
| 37 | 9-iron | Stiff | RH / LH | 100 | 63.5 | 36 |
| 42 | PW | Regular | RH / LH | 99 | 63.75 | 35.75 |
| 42 | PW | Stiff | RH / LH | 100 | 63.75 | 35.75 |
| 47 | AW | Regular | RH / LH | 99 | 64 | 35.5 |
| 47 | AW | Stiff | RH / LH | 100 | 64 | 35.5 |
UST Mamiya Recoil DART HDC aftermarket 24 builds · 20°–47° · 3 flexes · 63–69 g · 4.7–5°
- Weight
- 63–69 g
- Torque
- 4.7–5°
- Launch
- mid
- Flexes
- Light, Regular, Stiff
24 rows, unsorted.
| 20 | 4-iron | Light | RH / LH | 63 | 5 | 60.375 | 39.125 |
| 20 | 4-iron | Regular | RH / LH | 65 | 5 | 60.375 | 39.125 |
| 20 | 4-iron | Stiff | RH / LH | 69 | 4.7 | 60.375 | 39.125 |
| 22 | 5-iron | Light | RH / LH | 63 | 5 | 61 | 38.5 |
| 22 | 5-iron | Regular | RH / LH | 65 | 5 | 61 | 38.5 |
| 22 | 5-iron | Stiff | RH / LH | 69 | 4.7 | 61 | 38.5 |
| 25 | 6-iron | Light | RH / LH | 63 | 5 | 61.625 | 37.875 |
| 25 | 6-iron | Regular | RH / LH | 65 | 5 | 61.625 | 37.875 |
| 25 | 6-iron | Stiff | RH / LH | 69 | 4.7 | 61.625 | 37.875 |
| 29 | 7-iron | Light | RH / LH | 63 | 5 | 62.25 | 37.25 |
| 29 | 7-iron | Regular | RH / LH | 65 | 5 | 62.25 | 37.25 |
| 29 | 7-iron | Stiff | RH / LH | 69 | 4.7 | 62.25 | 37.25 |
| 33 | 8-iron | Light | RH / LH | 63 | 5 | 62.875 | 36.625 |
| 33 | 8-iron | Regular | RH / LH | 65 | 5 | 62.875 | 36.625 |
| 33 | 8-iron | Stiff | RH / LH | 69 | 4.7 | 62.875 | 36.625 |
| 37 | 9-iron | Light | RH / LH | 63 | 5 | 63.5 | 36 |
| 37 | 9-iron | Regular | RH / LH | 65 | 5 | 63.5 | 36 |
| 37 | 9-iron | Stiff | RH / LH | 69 | 4.7 | 63.5 | 36 |
| 42 | PW | Light | RH / LH | 63 | 5 | 63.75 | 35.75 |
| 42 | PW | Regular | RH / LH | 65 | 5 | 63.75 | 35.75 |
| 42 | PW | Stiff | RH / LH | 69 | 4.7 | 63.75 | 35.75 |
| 47 | AW | Light | RH / LH | 63 | 5 | 64 | 35.5 |
| 47 | AW | Regular | RH / LH | 65 | 5 | 64 | 35.5 |
| 47 | AW | Stiff | RH / LH | 69 | 4.7 | 64 | 35.5 |
Made-for means a version built for this club, not the aftermarket shaft of the same name — a different product with different specs. We keep them as separate records and never blur the two.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2024 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 29° | =119th of 953 | =13th of 47 | =18th of 121 Callaway irons · =108th of 208 high-handicap irons |
| Most offset at the 7-iron | 0.157" | =132nd of 583 | 5th of 36 | =23rd of 74 Callaway irons · =108th of 155 high-handicap irons |
| Widest loft range | 27° | =771st of 1,104 | =35th of 53 | =110th of 125 Callaway irons · =191st of 208 high-handicap irons |
| Most upright lie | 62.3° | =510th of 941 | =14th of 46 | =54th of 121 Callaway irons · =106th of 203 high-handicap irons |
| Longest | 37.3" | =49th of 894 | =3rd of 47 | =12th of 112 Callaway irons · =24th of 201 high-handicap irons |
player level — derived
This iron reads as built for a high-handicap player — our deterministic reading of 7-iron offset 0.157", 7-iron loft 29°. A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Bridgestone 220 MB · vs New Level 702 CB · vs Honma BERES 09 2-Star Iron
More irons
Callaway Apex Ai200 2024 · 21°–48° · 8 options · 2 stock shafts Callaway Apex CB '24 2024 · 20.5°–50° · 9 options · 1 stock shaft Callaway Apex MB '24 2024 · 20.5°–50° · 9 options · 1 stock shaft Callaway Apex Pro '24 2024 · 19°–50° · 9 options · 2 stock shafts Ben Hogan PTx Tour Irons 2024 · 21.5°–45.5° · 7 options · 2 stock shafts Bridgestone 220 MB 2024 · 7 options · 1 stock shaft Cobra Darkspeed Iron Set 2024 · 18.5°–54° · 9 options Honma BERES 09 2-Star Iron 2024 · 21°–55° · 9 options · 1 stock shaft
Other Callaway irons on record. Irons released in 2024 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Callaway's own specs, partly built.Taken from Callaway's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.8 configurations with 4 of the 7 specs an iron can publish.
- Stock shaft, built.2 stock shafts, each with its own specced page.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.