UST Mamiya shaft
The UST Mamiya Recoil ESX Iron Shafts is an iron shaft in 5 flexes — it weighs 48–67 g with 4.2–4.8° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
5 distinct weight-and-torque points across 5 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
UST Mamiya does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
STIFFNESS BY SECTION
Neither UST Mamiya nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 5 flex options: weight, torque, tip diameter and launch rating on every one; no spin rating and kick point at all.
5 rows, unsorted.
| LL | 48 | 4.8 | 0.37 | 0.6 | 40 | 5.5 | high | Recoil 440 ESX F0 |
| L | 52 | 4.2 | 0.37 | 0.6 | 40 | 5.5 | high | Recoil 450 ESX F1 |
| A | 59 | 4.8 | 0.37 | 0.6 | 41 | 5.5 | high | Recoil 460 ESX F2 |
| R | 64 | 4.7 | 0.37 | 0.6 | 41 | 5.5 | high | Recoil 460 ESX F3 |
| S | 67 | 4.6 | 0.37 | 0.6 | 41 | 5.5 | high | Recoil 460 ESX F4 |
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- UST Mamiya's own specs, partly built.Taken from UST Mamiya's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.5 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.