UST Mamiya shaft

The UST Mamiya DART V TSPX is an iron shaft in 5 flexes — it weighs 64–122 g with 1.5–4.3° torque.

Weight and torque, one panel eachpublished figures only

Published weight and torque for all 60 options, on two separate scales — grams and degrees share none.

View on UST Mamiya →

Compare this shaft →

How this shaft reads against the database

Flex

27 distinct weight-and-torque points across 60 flexes are ringed. Pick one above to read its exact position.

Weight and torque against every iron shaft

Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.

LAUNCH AND SPIN

UST Mamiya does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.

STIFFNESS BY SECTION

Neither UST Mamiya nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.

Specifications by flex

What this record publishes. Across 60 flex options: weight, torque, tip diameter and launch rating on every one; no spin rating and kick point at all.


A	64	4.3	0.37	0.597	42	Mid-High	F2	75	parallel	not published	not published
R	70	4.1	0.37	0.6	42	Mid-High	F3	75	parallel	not published	not published
S	74	3.9	0.37	0.6	42	Mid-High	F4	75	parallel	not published	not published
R	87	2.9	0.355	0.6	41	mid	F3	90	taper	2	not published
R	87	2.9	0.355	0.6	40.5	mid	F3	90	taper	3	not published
R	87	2.9	0.355	0.6	40	mid	F3	90	taper	4	not published
R	87	2.8	0.355	0.6	39.5	mid	F3	90	taper	5	not published
R	87	2.7	0.355	0.6	39	mid	F3	90	taper	6	not published
R	87	2.6	0.355	0.6	38.5	mid	F3	90	taper	7	not published
R	87	2.5	0.355	0.6	38	mid	F3	90	taper	8	not published
R	87	2.5	0.355	0.6	37.5	mid	F3	90	taper	9	not published
R	87	2.5	0.355	0.6	37	mid	F3	90	taper	W	not published
S	88	2.9	0.355	0.6	41	mid	F4	90	taper	2	not published
S	88	2.8	0.355	0.6	40.5	mid	F4	90	taper	3	not published
S	88	2.8	0.355	0.6	40	mid	F4	90	taper	4	not published
S	88	2.7	0.355	0.6	39.5	mid	F4	90	taper	5	not published
S	88	2.6	0.355	0.6	39	mid	F4	90	taper	6	not published
S	88	2.5	0.355	0.6	38.5	mid	F4	90	taper	7	not published
S	88	2.5	0.355	0.6	38	mid	F4	90	taper	8	not published
S	88	2.4	0.355	0.6	37.5	mid	F4	90	taper	9	not published
S	88	2.3	0.355	0.6	37	mid	F4	90	taper	W	not published
S	104	2	0.355	0.6	41	mid	F4	105	taper	2	not published
S	104	2	0.355	0.6	40.5	mid	F4	105	taper	3	not published
S	104	2	0.355	0.6	40	mid	F4	105	taper	4	not published
S	104	2	0.355	0.6	39.5	mid	F4	105	taper	5	not published
S	104	2	0.355	0.6	39	mid	F4	105	taper	6	not published
S	104	2	0.355	0.6	38.5	mid	F4	105	taper	7	not published
S	104	2	0.355	0.6	38	mid	F4	105	taper	8	not published
S	104	2	0.355	0.6	37.5	mid	F4	105	taper	9	not published
S	104	2	0.355	0.6	37	mid	F4	105	taper	W	not published
X	105	2	0.355	0.6	41	mid	F5	105	taper	2	not published
X	105	2	0.355	0.6	40.5	mid	F5	105	taper	3	not published
X	105	2	0.355	0.6	40	mid	F5	105	taper	4	not published
X	105	2	0.355	0.6	39.5	mid	F5	105	taper	5	not published
X	105	2	0.355	0.6	39	mid	F5	105	taper	6	not published
X	105	2	0.355	0.6	38.5	mid	F5	105	taper	7	not published
X	105	2	0.355	0.6	38	mid	F5	105	taper	8	not published
X	105	2	0.355	0.6	37.5	mid	F5	105	taper	9	not published
X	105	2	0.355	0.6	37.5	mid	F5	105	taper	W	Manufacturer table publishes two Wedge rows for DART V 105 F5 (37.5" and 37.0"); both preserved as separate SKUs.
X	105	2	0.355	0.6	37	mid	F5	105	taper	W	Manufacturer table publishes two Wedge rows for DART V 105 F5 (37.5" and 37.0"); both preserved as separate SKUs.
S	119	1.8	0.355	0.6	41	Mid-Low	F4	120	taper	2	not published
S	119	1.8	0.355	0.6	40.5	Mid-Low	F4	120	taper	3	not published
S	119	1.8	0.355	0.6	40	Mid-Low	F4	120	taper	4	not published
S	119	1.7	0.355	0.6	39.5	Mid-Low	F4	120	taper	5	not published
S	120	1.6	0.355	0.6	39	Mid-Low	F4	120	taper	6	not published
S	120	1.6	0.355	0.6	38.5	Mid-Low	F4	120	taper	7	not published
S	120	1.5	0.355	0.6	38	Mid-Low	F4	120	taper	8	not published
S	120	1.5	0.355	0.6	37.5	Mid-Low	F4	120	taper	9	not published
S	121	1.5	0.355	0.6	37	Mid-Low	F4	120	taper	W	not published
X	120	1.8	0.355	0.6	41	Mid-Low	F5	120	taper	2	not published
X	120	1.7	0.355	0.6	40.5	Mid-Low	F5	120	taper	3	not published
X	120	1.7	0.355	0.6	40	Mid-Low	F5	120	taper	4	not published
X	120	1.7	0.355	0.6	39.5	Mid-Low	F5	120	taper	5	not published
X	121	1.6	0.355	0.6	39	Mid-Low	F5	120	taper	6	not published
X	122	1.6	0.355	0.6	38.5	Mid-Low	F5	120	taper	7	not published
X	122	1.5	0.355	0.6	38	Mid-Low	F5	120	taper	8	not published
X	122	1.5	0.355	0.6	37.5	Mid-Low	F5	120	taper	9	not published
X	122	1.5	0.355	0.6	37	Mid-Low	F5	120	taper	W	not published
WEDGE	104	2	0.355	0.6	36	mid	not published	105	taper	Score Wedge	not published
WEDGE	120	1.5	0.355	0.6	36	mid	not published	120	taper	Score Wedge	not published

What's on this page

In progress2 of 3 built

2 of 3 parts of this shaft page are built, and we're filling in the rest.

UST Mamiya's own specs, partly built.Taken from UST Mamiya's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
Flex options, built.60 flexes, each with a published weight.
Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this shaft? 1 field we don't hold — or tell us something here is wrong