Project X shaft
The Project X HZRDUS G5 Yellow Handcrafted is a driver/fairway shaft in 4 flexes — it weighs 60–80 g with 2.9–3.4° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
7 distinct weight-and-torque points across 9 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every driver shaft
Every driver shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Project X does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
STIFFNESS BY SECTION
Neither Project X nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 9 flex options: weight and tip diameter on every one; torque on 7 of 9; no launch rating, spin rating and kick point at all.
9 rows, unsorted, showing the start of the table.
| 5.5 | Yellow | 60 | 3.4 | 0.335 | 0.61 | 46 | UHZRDSG5YLW6W55-46-HC | 60g | 73 g – 64 g |
| 5.5 | Yellow | 70 | 3.4 | 0.335 | 0.61 | 46 | UHZRDSG5YLW7W55-46-HC | 70g | 73 g – 64 g |
| 6.0 | Yellow | 60 | not published | 0.335 | 0.61 | 46 | UHZRDSG5YLW6W60-46-HC | 60g | 74 g – 65 g |
| 6.0 | Yellow | 70 | not published | 0.335 | 0.61 | 46 | UHZRDSG5YLW7W60-46-HC | 70g | 74 g – 65 g |
| 6.5 | Yellow | 60 | 3 | 0.335 | 0.61 | 46 | UHZRDSG5YLW6W65-46-HC | 60g | 75 g – 66 g |
| 6.5 | Yellow | 70 | 3 | 0.335 | 0.61 | 46 | UHZRDSG5YLW7W65-46-HC | 70g | 75 g – 66 g |
| TX | Yellow | 60 | 2.9 | 0.335 | 0.61 | 46 | UHZRDSG5YLW6WTX-46-HC | 60g | 83 g – 68 g |
| TX | Yellow | 70 | 2.9 | 0.335 | 0.61 | 46 | UHZRDSG5YLW7WTX-46-HC | 70g | 83 g – 68 g |
| TX | Yellow | 80 | 2.9 | 0.335 | 0.61 | 46 | UHZRDSG5YLW8WTX-46-HC | 80g | 83 g – 68 g |
What's on this page
In progress1 of 3 built
1 of 3 parts of this shaft page are built, and we're filling in the rest.
- Project X's own specs, partly built.Taken from Project X's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.9 flexes, each with a published weight.
- Launch, spin and torque, partly built.Published for 7 of 9 flexes.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.