Project X shaft
The Project X EvenFlow Riptide is a driver/fairway shaft in 4 flexes — it weighs 53–82 g with 2.2–5.4° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
8 distinct weight-and-torque points across 9 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every driver shaft
Every driver shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Project X rates this shaft mid launch and mid spin — the shading is how many of the 816 rated shafts on record share each square.
STIFFNESS BY SECTION
Neither Project X nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 9 flex options: weight, torque, tip diameter, launch rating and spin rating on every one; no kick point at all.
9 rows, unsorted, showing the start of the table.
| 5.5 | 53 | 5.4 | 0.335 | 0.64 | 46 | mid | mid | 50 |
| 6.0 | 53 | 5.4 | 0.335 | 0.64 | 46 | mid | mid | 50 |
| 6.0 | 63 | 4.4 | 0.335 | 0.64 | 46 | mid | mid | 60 |
| 6.5 | 64 | 4.4 | 0.335 | 0.64 | 46 | mid | mid | 60 |
| 6.5TX | 67 | 2.8 | 0.335 | 0.63 | 46 | mid | mid | 60 |
| 6.0 | 71 | 4.2 | 0.335 | 0.64 | 46 | mid | mid | 70 |
| 6.5 | 71 | 4 | 0.335 | 0.64 | 46 | mid | mid | 70 |
| 6.5TX | 75 | 2.4 | 0.335 | 0.62 | 46 | mid | mid | 70 |
| 6.5TX | 82 | 2.2 | 0.335 | 0.63 | 46 | mid | mid | 80 |
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Project X's own specs, partly built.Taken from Project X's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.9 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.