Nippon Shaft shaft
The Nippon Shaft N.S.PRO MODUS3 Wedge is an iron shaft in 1 flex — it weighs 111–133 g with 1.3–1.6° torque and a mid kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
3 distinct weight-and-torque points across 3 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Nippon Shaft does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
STIFFNESS BY SECTION
Neither Nippon Shaft nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 3 flex options: weight, torque, tip diameter, launch rating and kick point on every one; no spin rating at all.
3 rows, unsorted.
| Wedge | 111 | 1.6 | 0.355 | 0.6 | 37 | mid | low | 51.7 | Middle | Low | 105 | 37.008 | 940 |
| Wedge | 122 | 1.5 | 0.355 | 0.6 | 37 | mid | low | 52.3 | Middle | Low | 115 | not published | not published |
| Wedge | 133 | 1.3 | 0.355 | 0.6 | 37 | mid | low | 51.8 | Middle | Low | 125 | not published | not published |
Nippon Shaft publishes length (as published) in millimetres. The (in) column is that figure converted at 25.4 mm to the inch, and Nippon Shaft's own millimetre column sits beside it — neither is dropped, so the published figure is always on the page.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Nippon Shaft's own specs, partly built.Taken from Nippon Shaft's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.3 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.