Mitsubishi Chemical shaft
The Mitsubishi Chemical Tensei 1K Pro Red is a driver/fairway shaft in 4 flexes — it weighs 51–83 g with 2.9–4.7° torque and a low kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
14 distinct weight-and-torque points across 14 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every driver shaft
Every driver shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Mitsubishi Chemical does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
Stiffness by section
Where this shaft is stiff and where it gives, drawn from Mitsubishi Chemical's own published butt / mid / tip ratings.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value.
Specifications by flex
What this record publishes. Across 14 flex options: weight, torque, tip diameter, launch rating, spin rating and kick point on every one.
14 rows, unsorted, showing the start of the table.
| R | Red | 51 | 4.7 | 0.335 | 0.598 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| S | Red | 54 | 4.5 | 0.335 | 0.602 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| X | Red | 56 | 4.5 | 0.335 | 0.604 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| TX | Red | 57 | 4.5 | 0.335 | 0.604 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| R | Red | 59 | 4 | 0.335 | 0.602 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| S | Red | 61 | 3.9 | 0.335 | 0.608 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| X | Red | 63 | 3.8 | 0.335 | 0.61 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| TX | Red | 65 | 3.8 | 0.335 | 0.612 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| S | Red | 70 | 3 | 0.335 | 0.604 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| X | Red | 73 | 3 | 0.335 | 0.608 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| TX | Red | 74 | 3 | 0.335 | 0.61 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| S | Red | 80 | 2.9 | 0.335 | 0.604 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| X | Red | 82 | 2.9 | 0.335 | 0.606 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
| TX | Red | 83 | 2.9 | 0.335 | 0.608 | 46 | 3 | low | mid | firm+ | mid | mid | Butt FIRM+ / Mid MED / Tip MED | MID+ |
Flex profile (Butt/Mid/Tip) as published by Mitsubishi Chemical.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Mitsubishi Chemical's own specs, partly built.Taken from Mitsubishi Chemical's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.14 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.