Mitsubishi Chemical shaft
The Mitsubishi Chemical Tensei 1K Pro Hybrid is a hybrid shaft in 4 flexes — it weighs 59–95 g with 2.7–4.9° torque and a high kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
11 distinct weight-and-torque points across 11 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every hybrid shaft
Every hybrid shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Mitsubishi Chemical rates this shaft mid launch and mid spin — the shading is how many of the 357 rated shafts on record share each square.
STIFFNESS BY SECTION
Neither Mitsubishi Chemical nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 11 flex options: weight, torque, tip diameter, launch rating, spin rating and kick point on every one.
11 rows, unsorted, showing the start of the table.
| R | 59 | 4.9 | 0.37 | 0.604 | 42 | 4 | high | mid | mid |
| S | 61 | 4.7 | 0.37 | 0.606 | 42 | 4 | high | mid | mid |
| R | 69 | 3.8 | 0.37 | 0.598 | 42 | 4 | high | mid | mid |
| S | 71 | 3.8 | 0.37 | 0.602 | 42 | 4 | high | mid | mid |
| X | 74 | 3.7 | 0.37 | 0.604 | 42 | 4 | high | mid | mid |
| R | 80 | 3.1 | 0.37 | 0.592 | 42 | 4 | high | mid | mid |
| S | 82 | 3 | 0.37 | 0.596 | 42 | 4 | high | mid | mid |
| X | 84 | 3 | 0.37 | 0.6 | 42 | 4 | high | mid | mid |
| S | 89 | 2.7 | 0.37 | 0.596 | 42 | 4 | high | mid | mid |
| X | 92 | 2.7 | 0.37 | 0.6 | 42 | 4 | high | mid | mid |
| TX | 95 | 2.7 | 0.37 | 0.602 | 42 | 4 | high | mid | mid |
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Mitsubishi Chemical's own specs, partly built.Taken from Mitsubishi Chemical's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.11 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.