Mitsubishi Chemical shaft
The Mitsubishi Chemical OT Iron is an iron shaft in 3 flexes — it weighs 75–109 g with 2.7–3.2° torque and a mid kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
8 distinct weight-and-torque points across 8 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Mitsubishi Chemical does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
STIFFNESS BY SECTION
Neither Mitsubishi Chemical nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 8 flex options: weight, torque, tip diameter and kick point on every one; no launch rating and spin rating at all.
8 rows, unsorted.
| R | 75 | 3.2 | 0.37 | 0.598 | 39.5 | 4.7 | mid | OT Iron 75 | parallel |
| S | 80 | 3.1 | 0.37 | 0.604 | 39.5 | 4.7 | mid | OT Iron 75 | parallel |
| R | 84 | 3 | 0.37 | 0.598 | 39.5 | 4.7 | mid | OT Iron 85 | parallel |
| S | 90 | 3 | 0.37 | 0.608 | 39.5 | 4.7 | mid | OT Iron 85 | parallel |
| R | 91 | 2.9 | 0.37 | 0.598 | 39.5 | 4.7 | mid | OT Iron 95 | parallel |
| S | 97 | 2.9 | 0.37 | 0.608 | 39.5 | 4.7 | mid | OT Iron 95 | parallel |
| S | 105 | 2.8 | 0.37 | 0.602 | 39.5 | 4.7 | mid | OT Iron 105 | parallel |
| X | 109 | 2.7 | 0.37 | 0.608 | 39.5 | 4.7 | mid | OT Iron 105 | parallel |
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Mitsubishi Chemical's own specs, partly built.Taken from Mitsubishi Chemical's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.8 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.