Mitsubishi Chemical shaft

The Mitsubishi Chemical MMT Taper Irons is an iron shaft in 4 flexes — it weighs 59–125 g with 2.7–3.7° torque and a mid kick point.

Weight and torque, one panel eachpublished figures only

Published weight and torque for all 77 options, on two separate scales — grams and degrees share none.

View on Mitsubishi Chemical →

Compare this shaft →

How this shaft reads against the database

Flex

10 distinct weight-and-torque points across 77 flexes are ringed. Pick one above to read its exact position.

Weight and torque against every iron shaft

Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.

LAUNCH AND SPIN

Mitsubishi Chemical does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.

STIFFNESS BY SECTION

Neither Mitsubishi Chemical nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.

Specifications by flex

What this record publishes. Across 77 flex options: weight, torque, tip diameter and kick point on every one; no launch rating and spin rating at all.


A	59	3.5	0.355	0.596	39.5	mid	MMT Taper Iron 55	taper
A	59	3.5	0.355	0.596	39	mid	MMT Taper Iron 55	taper
A	59	3.5	0.355	0.596	38.5	mid	MMT Taper Iron 55	taper
A	59	3.5	0.355	0.596	38	mid	MMT Taper Iron 55	taper
A	59	3.5	0.355	0.596	37.5	mid	MMT Taper Iron 55	taper
A	59	3.5	0.355	0.596	37	mid	MMT Taper Iron 55	taper
A	59	3.5	0.355	0.596	36.5	mid	MMT Taper Iron 55	taper
R	63	3.5	0.355	0.593	39.5	mid	MMT Taper Iron 65	taper
R	63	3.5	0.355	0.593	39	mid	MMT Taper Iron 65	taper
R	63	3.5	0.355	0.593	38.5	mid	MMT Taper Iron 65	taper
R	63	3.5	0.355	0.593	38	mid	MMT Taper Iron 65	taper
R	63	3.5	0.355	0.593	37.5	mid	MMT Taper Iron 65	taper
R	63	3.5	0.355	0.593	37	mid	MMT Taper Iron 65	taper
R	63	3.5	0.355	0.593	36.5	mid	MMT Taper Iron 65	taper
S	74	3.7	0.355	0.606	39.5	mid	MMT Taper Iron 75	taper
S	74	3.7	0.355	0.606	39	mid	MMT Taper Iron 75	taper
S	74	3.7	0.355	0.606	38.5	mid	MMT Taper Iron 75	taper
S	74	3.7	0.355	0.606	38	mid	MMT Taper Iron 75	taper
S	74	3.7	0.355	0.606	37.5	mid	MMT Taper Iron 75	taper
S	74	3.7	0.355	0.606	37	mid	MMT Taper Iron 75	taper
S	74	3.7	0.355	0.606	36.5	mid	MMT Taper Iron 75	taper
R	84	3.3	0.355	0.596	39	mid	MMT Taper Iron 85	taper
R	84	3.3	0.355	0.596	38.5	mid	MMT Taper Iron 85	taper
R	84	3.3	0.355	0.596	38	mid	MMT Taper Iron 85	taper
R	84	3.3	0.355	0.596	37.5	mid	MMT Taper Iron 85	taper
R	84	3.3	0.355	0.596	37	mid	MMT Taper Iron 85	taper
R	84	3.3	0.355	0.596	36.5	mid	MMT Taper Iron 85	taper
R	84	3.3	0.355	0.596	36	mid	MMT Taper Iron 85	taper
R	84	3.3	0.355	0.596	35.5	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	39	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	38.5	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	38	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	37.5	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	37	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	36.5	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	36	mid	MMT Taper Iron 85	taper
S	88	3.2	0.355	0.602	35.5	mid	MMT Taper Iron 85	taper
S	95	2.9	0.355	0.61	39	mid	MMT Taper Iron 95	taper
S	95	2.9	0.355	0.61	38.5	mid	MMT Taper Iron 95	taper
S	95	2.9	0.355	0.61	38	mid	MMT Taper Iron 95	taper
S	95	2.9	0.355	0.61	37.5	mid	MMT Taper Iron 95	taper
S	95	2.9	0.355	0.61	37	mid	MMT Taper Iron 95	taper
S	95	2.9	0.355	0.61	36.5	mid	MMT Taper Iron 95	taper
S	95	2.9	0.355	0.61	36	mid	MMT Taper Iron 95	taper
S	95	2.9	0.355	0.61	35.5	mid	MMT Taper Iron 95	taper
S	105	2.8	0.355	0.598	39	mid	MMT Taper Iron 105	taper
S	105	2.8	0.355	0.598	38.5	mid	MMT Taper Iron 105	taper
S	105	2.8	0.355	0.598	38	mid	MMT Taper Iron 105	taper
S	105	2.8	0.355	0.598	37.5	mid	MMT Taper Iron 105	taper
S	105	2.8	0.355	0.598	37	mid	MMT Taper Iron 105	taper
S	105	2.8	0.355	0.598	36.5	mid	MMT Taper Iron 105	taper
S	105	2.8	0.355	0.598	36	mid	MMT Taper Iron 105	taper
S	105	2.8	0.355	0.598	35.5	mid	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	39	MID/HIGH	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	38.5	MID/HIGH	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	38	MID/HIGH	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	37.5	MID/HIGH	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	37	MID/HIGH	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	36.5	MID/HIGH	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	36	MID/HIGH	MMT Taper Iron 105	taper
TX	113	2.8	0.355	0.606	35.5	MID/HIGH	MMT Taper Iron 105	taper
S	124	2.8	0.355	0.606	39	MID/HIGH	MMT Taper Iron 125	taper
S	124	2.8	0.355	0.606	38.5	MID/HIGH	MMT Taper Iron 125	taper
S	124	2.8	0.355	0.606	38	MID/HIGH	MMT Taper Iron 125	taper
S	124	2.8	0.355	0.606	37.5	MID/HIGH	MMT Taper Iron 125	taper
S	124	2.8	0.355	0.606	37	MID/HIGH	MMT Taper Iron 125	taper
S	124	2.8	0.355	0.606	36.5	MID/HIGH	MMT Taper Iron 125	taper
S	124	2.8	0.355	0.606	36	MID/HIGH	MMT Taper Iron 125	taper
S	124	2.8	0.355	0.606	35.5	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	39	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	38.5	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	38	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	37.5	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	37	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	36.5	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	36	MID/HIGH	MMT Taper Iron 125	taper
TX	125	2.7	0.355	0.608	35.5	MID/HIGH	MMT Taper Iron 125	taper

Stock in 2 heads

Callaway Apex Pro '24

iron · 27 builds · Regular 85g · Stiff 95g · X-Stiff 105g

TaylorMade P·790 Irons

iron · 27 builds · Regular · Stiff · X-Stiff

What's on this page

In progress2 of 3 built

2 of 3 parts of this shaft page are built, and we're filling in the rest.

Mitsubishi Chemical's own specs, partly built.Taken from Mitsubishi Chemical's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
Flex options, built.77 flexes, each with a published weight.
Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.

The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.

Know something about this shaft? 1 field we don't hold — or tell us something here is wrong