Mitsubishi Chemical shaft
The Mitsubishi Chemical MMT AMC Irons is an iron shaft in 39 flexes — it weighs 40–90 g with 2.8–6° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
45 distinct weight-and-torque points across 55 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Mitsubishi Chemical does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
STIFFNESS BY SECTION
Neither Mitsubishi Chemical nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 55 flex options: weight on 54 of 55 and torque on 54 of 55; no tip diameter, launch rating, spin rating and kick point at all.
55 rows, unsorted, showing the start of the table.
| R4 #4 | 40 | 6 | 38.5 |
| R4 #5 | 40 | 6 | 38 |
| R4 #6 | 40 | 5.9 | 37.5 |
| R4 #7 | 41 | 5.9 | 37 |
| R4 #8 | 42 | 5.5 | 36.5 |
| R4 #9 | 44 | 4.9 | 36 |
| R4 #W | 46 | 4.6 | 35.5 |
| R3 #4 | 48 | 4.1 | 39.5 |
| R3 #5 | 48 | 4.1 | 39 |
| R3 #6 | 48 | 4.1 | 38.5 |
| R3 #7 | 48 | 4.1 | 38 |
| R3 #8 | 50 | 3.7 | 37.5 |
| R3 #9 | 52 | 3.6 | 37 |
| R3 #W | 54 | 3.3 | 36.5 |
| R2 #4 | 55 | 4.2 | 39.5 |
| R2 #5 | 55 | 4.1 | 39 |
| R2 #6 | 55 | 4.1 | 38.5 |
| R2 #7 | 56 | 4 | 38 |
| R2 #8 | 58 | 3.5 | 37.5 |
| R2 #9 | 60 | 3.2 | 37 |
| R2 #W | 62 | 3.1 | 36.5 |
| R #3 | 57 | 4.1 | 40 |
| R #4 | 57 | 4.1 | 39.5 |
| R #5 | 57 | 4.1 | 39 |
| R #6 | 57 | 4 | 38.5 |
| R #7 | 57 | 3.9 | 38 |
| R #8 | 59 | 3.7 | 37.5 |
| R #9 | 61 | 3.4 | 37 |
| R #W | 63 | 3.2 | 36.5 |
| R #3 | 60 | 4.1 | 40 |
| R #4 | 60 | 4.1 | 39.5 |
| R #5 | 60 | 3.9 | 39 |
| R #6 | 60 | 3.9 | 38.5 |
| R #7 | 60 | 4 | 38 |
| R #8 | 62 | 3.8 | 37.5 |
| R #9 | 65 | 3.4 | 37 |
| R #W | 66 | 3.2 | 36.5 |
| FLEX | not published | not published | not published |
| R #3 | 73 | 3.6 | 40 |
| R #4 | 74 | 3.2 | 39.5 |
| R #5 | 76 | 3.2 | 39 |
| R #6 | 79 | 3.1 | 38.5 |
| R #7 | 81 | 3 | 38 |
| R #8 | 83 | 3 | 37.5 |
| R #9 | 84 | 2.9 | 37 |
| R #W | 86 | 2.9 | 36.5 |
| S #2 | 76 | 3.4 | 40.5 |
| S #3 | 78 | 3.4 | 40 |
| S #4 | 79 | 3.2 | 39.5 |
| S #5 | 80 | 3.1 | 39 |
| S #6 | 84 | 3.1 | 38.5 |
| S #7 | 85 | 3 | 38 |
| S #8 | 87 | 3 | 37.5 |
| S #9 | 89 | 2.8 | 37 |
| S #W | 90 | 2.8 | 36.5 |
What's on this page
In progress1 of 3 built
1 of 3 parts of this shaft page are built, and we're filling in the rest.
- Mitsubishi Chemical's own specs, partly built.Taken from Mitsubishi Chemical's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.55 flexes, 54 of them with a published weight.
- Launch, spin and torque, partly built.Published for 54 of 55 flexes.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.