Mitsubishi Chemical shaft
The Mitsubishi Chemical Diamana Thump Fairway is a fairway shaft in 3 flexes — it weighs 57–89 g with 2.9–4.1° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
9 distinct weight-and-torque points across 9 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every fairway shaft
Every fairway shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Mitsubishi Chemical does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
STIFFNESS BY SECTION
Neither Mitsubishi Chemical nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 9 flex options: weight, torque, tip diameter and kick point on every one; no launch rating and spin rating at all.
9 rows, unsorted, showing the start of the table.
| R | 57 | 4.1 | 0.335 | 0.602 | 43 | 3.5 | MID/HIGH |
| S | 58 | 4.1 | 0.335 | 0.604 | 43 | 3.5 | MID/HIGH |
| R | 65 | 3.6 | 0.335 | 0.602 | 43 | 3.5 | MID/HIGH |
| S | 67 | 3.6 | 0.335 | 0.606 | 43 | 3.5 | MID/HIGH |
| X | 70 | 3.5 | 0.335 | 0.61 | 43 | 3.5 | MID/HIGH |
| S | 77 | 3.1 | 0.335 | 0.606 | 43 | 3.5 | MID/HIGH |
| X | 79 | 3 | 0.335 | 0.61 | 43 | 3.5 | MID/HIGH |
| S | 86 | 2.9 | 0.335 | 0.606 | 43 | 3.5 | MID/HIGH |
| X | 89 | 2.9 | 0.335 | 0.61 | 43 | 3.5 | MID/HIGH |
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Mitsubishi Chemical's own specs, partly built.Taken from Mitsubishi Chemical's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.9 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.