Fujikura shaft
The Fujikura Vista PRO Iron is an iron shaft in 4 flexes — it weighs 49–75 g with 3.6–5.2° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
9 distinct weight-and-torque points across 9 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Fujikura rates this shaft high launch and high spin — the shading is how many of the 486 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 9 flex options: weight, torque, launch rating and spin rating on every one; kick point on 7 of 9; no tip diameter at all.
9 rows, unsorted, showing the start of the table.
| R3 | 49 | 5.2 | 0.59 | 40.5 | 6 | 66 | 64 | low | high | high | firm | not published | firm |
| R2 | 49.5 | 4.7 | 0.59 | 40.5 | 6 | 62 | 60 | low | high | high | soft+ | not published | soft+ |
| R3 | 57.5 | 4.6 | 0.595 | 40.5 | 6 | 64 | 62 | low | high | high | mid+ | not published | mid+ |
| R2 | 58.5 | 4.4 | 0.595 | 40.5 | 6 | 60 | 56 | low | high | high | soft+ | not published | soft+ |
| R | 59 | 4.2 | 0.595 | 40.5 | 6 | 56 | 52 | low | high | high | soft | not published | soft |
| R | 67 | 4.1 | 0.6 | 40.5 | 6 | 53 | 51 | not published | high | high | soft+ | not published | soft+ |
| S | 68.5 | 3.9 | 0.6 | 40.5 | 6 | 48 | 48 | not published | high | high | soft | not published | soft |
| R | 74.5 | 3.7 | 0.605 | 40.5 | 6 | 50 | 49 | mid | mid | mid | soft+ | not published | mid+ |
| S | 75 | 3.6 | 0.605 | 40.5 | 6 | 46 | 47 | mid | mid | mid | soft | not published | soft+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.9 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.