Fujikura shaft
The Fujikura Vista PRO is a driver/fairway shaft in 5 flexes — it weighs 48–75.5 g with 4.5–6.4° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
12 distinct weight-and-torque points across 13 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every driver shaft
Every driver shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Fujikura rates this shaft high launch and high spin — the shading is how many of the 816 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 13 flex options: weight, torque, launch rating and spin rating on every one; kick point on 7 of 13; no tip diameter at all.
13 rows, unsorted, showing the start of the table.
| R3 | 48 | 6.4 | 0.595 | 45 | 2.5 | 156 | 126 | low | high | high | firm+ | not published | firm+ |
| R2 | 48 | 6.4 | 0.595 | 45 | 2.5 | 148 | 116 | low | high | high | mid+ | not published | firm |
| R | 49 | 5.8 | 0.595 | 45 | 2.5 | 140 | 106 | low | high | high | mid | not published | mid+ |
| R2 | 56.5 | 5.9 | 0.6 | 46 | 2.5 | 141 | 105 | low | high | high | firm+ | not published | firm+ |
| R | 58 | 5.6 | 0.605 | 46 | 2.5 | 134 | 96 | not published | high | high | mid+ | not published | firm+ |
| S | 58.5 | 5.3 | 0.605 | 46 | 2.5 | 126 | 88 | not published | high | high | soft+ | not published | firm+ |
| R | 63 | 5.2 | 0.6 | 46 | 2.5 | 124 | 94 | not published | high | high | firm+ | not published | firm+ |
| S | 65 | 5 | 0.6 | 46 | 2.5 | 116 | 87 | not published | high | high | firm | not published | firm+ |
| R | 63.5 | 5.3 | 0.6 | 46 | 2.5 | 117 | 96 | mid | mid | mid | firm+ | not published | firm+ |
| S | 65.5 | 5 | 0.6 | 46 | 2.5 | 109 | 88 | mid | mid | mid | firm | not published | firm+ |
| X | 67.5 | 4.8 | 0.605 | 46 | 2.5 | 101 | 81 | mid | mid | mid | mid | not published | firm |
| S | 75 | 4.8 | 0.605 | 46 | 2.5 | 105 | 84 | not published | mid | mid | firm+ | not published | firm+ |
| X | 75.5 | 4.5 | 0.605 | 46 | 2.5 | 98 | 78 | not published | mid | mid | firm | not published | firm+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.13 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.