Fujikura shaft
The Fujikura Speeder Evolution I is a shaft in 5 flexes — it weighs 47–79 g with 2.6–4.8° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
WEIGHT AND TORQUE
This record carries no club category, so there is no peer field to place it in.
Launch and spin, as published
Fujikura rates this shaft mid launch and mid spin — the shading is how many of the 0 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 18 flex options: weight, torque, launch rating, spin rating and kick point on every one; no tip diameter at all.
18 rows, unsorted, showing the start of the table.
| S | 78 | 2.7 | 0.615 | 47 | 2.5 | 100 | 73 | high | mid | low | mid | not published | mid+ |
| X | 79 | 2.7 | 0.615 | 47 | 2.5 | 95 | 68 | high | mid | low | soft+ | not published | mid |
| S | 78 | 2.6 | 0.62 | 46 | 2.5 | 95 | 73 | high | low | low | mid | not published | mid |
| X | 78 | 2.6 | 0.62 | 46 | 2.5 | 90 | 68 | high | low | low | soft+ | not published | soft+ |
| R | 64 | 3.2 | 0.605 | 47 | 2.5 | 110 | 85 | mid | mid | mid | firm | not published | firm |
| S | 66 | 3.2 | 0.605 | 47 | 2.5 | 100 | 80 | mid | mid | mid | mid | not published | mid |
| X | 68 | 3.2 | 0.605 | 47 | 2.5 | 95 | 75 | mid | mid | mid | soft+ | not published | soft+ |
| S | 68 | 3.5 | 0.605 | 46 | 2.5 | 105 | 80 | mid | mid | M/L | mid | not published | mid+ |
| X | 68 | 3.5 | 0.605 | 46 | 2.5 | 100 | 75 | mid | mid | M/L | soft+ | not published | mid |
| R2 | 57 | 3.7 | 0.6 | 47 | 2.5 | 120 | 96 | mid | M/H | mid | firm | not published | mid+ |
| R | 58 | 3.7 | 0.605 | 47 | 2.5 | 110 | 90 | mid | M/H | mid | mid | not published | soft+ |
| S | 59 | 3.5 | 0.605 | 47 | 2.5 | 105 | 84 | mid | M/H | mid | soft+ | not published | soft |
| A | 57 | 4.8 | 0.6 | 46 | 4 | 140 | 91 | low | M/H | mid | mid+ | not published | firm+ |
| R | 59 | 4.8 | 0.6 | 46 | 4 | 128 | 86 | mid | mid | mid | soft+ | not published | firm |
| S | 60 | 4.8 | 0.6 | 46 | 4 | 120 | 79 | mid | mid | mid | mid | not published | firm+ |
| X | 60 | 4.8 | 0.6 | 46 | 4 | 116 | 73 | mid | mid | mid | soft+ | not published | firm |
| R2 | 47 | 4.6 | 0.6 | 47 | 2.5 | 130 | 104 | low | M/H | M/H | mid+ | not published | mid+ |
| R | 49 | 4.6 | 0.6 | 47 | 2.5 | 120 | 94 | low | M/H | M/H | soft+ | not published | soft+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.18 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.