Fujikura shaft
The Fujikura Pro Iron is an iron shaft in 5 flexes — it weighs 70–117 g with 2.3–3.1° torque and a mid kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
13 distinct weight-and-torque points across 14 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Fujikura rates this shaft mid launch and mid spin — the shading is how many of the 486 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 14 flex options: weight and torque on every one; launch rating on 10 of 14, spin rating on 10 of 14 and kick point on 10 of 14; no tip diameter at all.
14 rows, unsorted, showing the start of the table.
| R2 | 70 | 3.1 | 0.605 | 40.5 | 6 | 60 | 57 | mid | mid | mid | firm+ | not published | firm+ |
| R | 70 | 3 | 0.605 | 40.5 | 6 | 55 | 51 | mid | mid | mid | mid+ | not published | firm+ |
| S | 71 | 3 | 0.605 | 40.5 | 6 | 49 | 47 | mid | mid | mid | soft | not published | mid |
| R2 | 74 | 3.1 | 0.605 | 40.5 | 6 | 59 | 53 | mid | mid | mid | firm | not published | firm+ |
| R | 76 | 3 | 0.605 | 40.5 | 6 | 54 | 49 | mid | mid | mid | soft+ | not published | firm |
| S | 78 | 3 | 0.605 | 40.5 | 6 | 50 | 45 | mid | mid | mid | soft | not published | mid+ |
| R | 88 | 3 | 0.605 | 40.5 | 6 | 54 | 50 | mid | mid | mid | mid+ | not published | firm |
| S | 89 | 3 | 0.605 | 40.5 | 6 | 49 | 46 | mid | mid | mid | soft+ | not published | soft+ |
| R | 95 | 3 | 0.605 | 40.5 | 6 | 56 | 50 | mid | mid | mid | firm+ | not published | firm+ |
| S | 95 | 3 | 0.605 | 40.5 | 6 | 52 | 47 | mid | mid | mid | mid+ | not published | mid+ |
| TOUR S | 96 | 2.8 | 0.605 | 40.5 | 6 | 42 | 40 | not published | not published | not published | mid | not published | mid |
| TOUR X | 97.5 | 2.7 | 0.605 | 40.5 | 6 | 38 | 37 | not published | not published | not published | soft | not published | soft |
| TOUR S | 116.5 | 2.5 | 0.605 | 40.5 | 6 | 42 | 40 | not published | not published | not published | firm | not published | firm |
| TOUR X | 117 | 2.3 | 0.605 | 40.5 | 6 | 38 | 36 | not published | not published | not published | soft+ | not published | soft+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.14 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.