Fujikura shaft
The Fujikura PRO HB is a hybrid shaft in 4 flexes — it weighs 63–83 g with 2.8–3.7° torque and a mid kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
6 distinct weight-and-torque points across 6 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every hybrid shaft
Every hybrid shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Fujikura rates this shaft mid launch and mid spin — the shading is how many of the 357 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 6 flex options: weight, torque and spin rating on every one; launch rating on 3 of 6 and kick point on 2 of 6; no tip diameter at all.
6 rows, unsorted.
| R2 | 63 | 3.7 | 0.602 | 42 | 3 | 54 | 62 | not published | not published | mid | firm+ | not published | firm |
| R | 63.5 | 3.5 | 0.602 | 42 | 3 | 51 | 56 | not published | not published | mid | mid | not published | mid+ |
| R | 72.5 | 3.5 | 0.602 | 42 | 3 | 50 | 56 | not published | mid | mid | firm+ | not published | firm+ |
| S | 73 | 3.2 | 0.602 | 42 | 3 | 46 | 52 | not published | mid | mid | mid+ | not published | firm |
| S | 83 | 3 | 0.602 | 42 | 3 | 42 | 50 | mid | mid | mid | firm+ | not published | firm+ |
| X | 83 | 2.8 | 0.602 | 42 | 3 | 38 | 46 | mid | not published | mid | mid+ | not published | mid+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.6 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.