Fujikura shaft
The Fujikura Motore X is a driver/fairway shaft in 4 flexes — it weighs 57–85 g with 3.3–5.2° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
13 distinct weight-and-torque points across 13 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every driver shaft
Every driver shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Fujikura does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 13 flex options: weight and torque on every one; spin rating on 8 of 13; no tip diameter, launch rating and kick point at all.
13 rows, unsorted, showing the start of the table.
| R2 | 57 | 5.2 | 0.6 | 46 | 2.5 | 133 | 107 | mid | firm+ | not published | firm+ |
| R | 58 | 4.9 | 0.605 | 46 | 2.5 | 122 | 95 | mid | mid+ | not published | firm+ |
| S | 59 | 4.6 | 0.605 | 46 | 2.5 | 111 | 89 | mid | mid | not published | firm |
| R | 67 | 4.5 | 0.605 | 46 | 2.5 | 114 | 91 | mid | firm+ | not published | firm+ |
| S | 68 | 4.3 | 0.605 | 46 | 2.5 | 106 | 86 | mid | firm | not published | firm+ |
| X | 69 | 4.1 | 0.605 | 46 | 2.5 | 99 | 81 | mid | mid | not published | mid+ |
| S | 76 | 4.1 | 0.605 | 46 | 2.5 | 100 | 80 | mid | firm | not published | firm+ |
| X | 77 | 3.9 | 0.605 | 46 | 2.5 | 94 | 75 | mid | mid+ | not published | firm |
| S | 68 | 4.1 | 0.605 | 46 | 2.5 | 97 | 82 | not published | mid+ | not published | mid+ |
| X | 69 | 3.7 | 0.61 | 46 | 2.5 | 89 | 77 | not published | soft+ | not published | soft |
| S | 78 | 3.8 | 0.605 | 46 | 2.5 | 93 | 77 | not published | mid+ | not published | firm |
| X | 79 | 3.5 | 0.605 | 46 | 2.5 | 88 | 72 | not published | soft+ | not published | soft+ |
| X | 85 | 3.3 | 0.61 | 46 | 2.5 | 91 | 69 | not published | mid+ | not published | firm+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.13 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.