Fujikura shaft
The Fujikura MCI is an iron shaft in 3 flexes — it weighs 65–106 g with 2.6–3° torque and a mid kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
6 distinct weight-and-torque points across 6 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Fujikura does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 6 flex options: weight, torque and kick point on every one; no tip diameter, launch rating and spin rating at all.
6 rows, unsorted.
| R | 65 | 3 | 0.591 | 2.5 | 55 | 67 | mid | firm+ | not published | mid |
| S | 67 | 3 | 0.595 | 2.5 | 53 | 62 | mid | firm+ | not published | soft+ |
| R | 84 | 2.7 | 0.591 | 2.5 | 55 | 60 | mid | firm+ | not published | firm+ |
| S | 86 | 2.7 | 0.595 | 2.5 | 52 | 55 | mid | firm | not published | mid+ |
| S | 104 | 2.6 | 0.595 | 2.5 | 47 | 48 | mid | firm+ | not published | firm+ |
| X | 106 | 2.6 | 0.599 | 2.5 | 45 | 43 | mid | mid | not published | firm+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.6 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.