Fujikura shaft
The Fujikura EXS is an iron shaft in 4 flexes — it weighs 60–78 g with 3.5–4.2° torque and a mid kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
5 distinct weight-and-torque points across 6 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Fujikura rates this shaft high launch and high spin — the shading is how many of the 486 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 6 flex options: weight, torque, tip diameter, launch rating, spin rating and kick point on every one.
6 rows, unsorted.
| R2 | 60 | 3.8 | 0.37 | 0.6 | 41.5 | 65 | 60 | L/M | high | M/H | mid+ | not published | firm+ |
| R | 65 | 3.8 | 0.37 | 0.6 | 41.5 | 57 | 50 | L/M | high | M/H | soft+ | not published | mid+ |
| S | 65 | 3.8 | 0.37 | 0.6 | 41.5 | 45 | 45 | L/M | high | M/H | soft | not published | soft |
| R | 77 | 3.5 | 0.37 | 0.61 | 41 | 55 | 50 | mid | M/H | mid | mid | not published | firm+ |
| S | 78 | 3.5 | 0.37 | 0.61 | 41 | 50 | 45 | mid | M/H | mid | soft | not published | mid+ |
| L | 60 | 4.2 | 0.37 | 0.585 | 40 | 77 | 83 | L/M | high | high | firm+ | not published | firm+ |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.6 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.