Fujikura shaft
The Fujikura 2016 Vista PRO Iron is an iron shaft in 4 flexes — it weighs 51–71 g with 3.2–4.1° torque and a low kick point.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
7 distinct weight-and-torque points across 7 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
Fujikura rates this shaft high launch and mid spin — the shading is how many of the 486 rated shafts on record share each square.
Stiffness by section
Where this shaft is stiff and where it gives — bands DERIVED by ranking each section against the maker's own shafts of the same type and weight.
A hatched section is one with no published rating — it is drawn as unknown rather than shaded at a middle value. Derived profiles carry no mid-section reading at all, because the numbers they are ranked from describe only the tip and the butt.
Specifications by flex
What this record publishes. Across 7 flex options: weight, torque, launch rating, spin rating and kick point on every one; no tip diameter at all.
7 rows, unsorted.
| R3 | 51 | 4.1 | 0.6 | 40.5 | 6 | 67 | 66 | low | high | M/H | firm+ | not published | firm+ |
| R2 | 51 | 3.9 | 0.6 | 40.5 | 6 | 62 | 61 | low | high | M/H | mid | not published | mid |
| R3 | 60 | 3.9 | 0.6 | 40.5 | 6 | 64 | 61 | low | high | M/H | firm | not published | firm |
| R2 | 61 | 3.7 | 0.6 | 40.5 | 6 | 59 | 57 | low | high | M/H | mid+ | not published | mid+ |
| R | 62 | 3.6 | 0.6 | 40.5 | 6 | 54 | 54 | low | high | mid | mid | not published | mid |
| R | 70 | 3.4 | 0.6 | 40.5 | 6 | 56 | 54 | M/L | M/H | mid | firm | not published | firm+ |
| S | 71 | 3.2 | 0.6 | 40.5 | 6 | 52 | 50 | M/L | M/H | mid | mid | not published | firm |
Flex profile is estimated — ranked from Fujikura's tip/butt-flex figures within similar shafts (approximate); the raw numbers are in the table.
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Fujikura's own specs, partly built.Taken from Fujikura's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.7 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.