Aldila shaft
The Aldila NV COMP Iron is an iron shaft in 4 flexes — it weighs 86 g with 2.4–3° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
4 distinct weight-and-torque points across 8 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
LAUNCH AND SPIN
Aldila does not publish a launch or spin rating for this shaft. We do not infer one — a kick point is a related measurement, not the same measurement.
STIFFNESS BY SECTION
Neither Aldila nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 8 flex options: weight, torque, tip diameter and kick point on every one; no launch rating and spin rating at all.
8 rows, unsorted.
| A | 86 | 3 | 0.355 | 0.62 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
| R | 86 | 2.6 | 0.355 | 0.625 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
| S | 86 | 2.5 | 0.355 | 0.625 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
| X | 86 | 2.4 | 0.355 | 0.63 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
| A | 86 | 3 | 0.37 | 0.62 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
| R | 86 | 2.6 | 0.37 | 0.625 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
| S | 86 | 2.5 | 0.37 | 0.625 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
| X | 86 | 2.4 | 0.37 | 0.63 | 0 | MID/HIGH | 40.5-36.5 | NV® Comp Iron 85 | TAPER | A |
What's on this page
In progress2 of 3 built
2 of 3 parts of this shaft page are built, and we're filling in the rest.
- Aldila's own specs, partly built.Taken from Aldila's product page. We haven't found their full spec sheet for this shaft yet, so some figures they publish may be missing.
- Flex options, built.8 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.