ACCRA shaft
The ACCRA iSteel Blue Taper Tip is an iron shaft in 2 flexes — it weighs 95–105 g with 1.5° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
2 distinct weight-and-torque points across 16 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every iron shaft
Every iron shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
ACCRA rates this shaft high launch and high spin — the shading is how many of the 486 rated shafts on record share each square.
STIFFNESS BY SECTION
Neither ACCRA nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 16 flex options: weight, torque, tip diameter, launch rating and spin rating on every one; no kick point at all.
16 rows, unsorted, showing the start of the table.
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 39.5 | high | high | 110 g | 4-iron | Moderate | ACHL95-395-TT-HT |
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 39 | high | high | 110 g | 5-iron | Moderate | ACHL95-39-TT-HT |
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 38.5 | high | high | 110 g | 6-iron | Moderate | ACHL95-385-TT-HT |
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 38 | high | high | 110 g | 7-iron | Moderate | ACHL95-38-TT-HT |
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 37.5 | high | high | 110 g | 8-iron | Moderate | ACHL95-375-TT-HT |
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 37 | high | high | 110 g | 9-iron | Moderate | ACHL95-37-TT-HT |
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 36.5 | high | high | 110 g | PW | Moderate | ACHL95-365-TT-HT |
| M3 | Blue | 95 | 1.5 | 0.355 | 0.6 | 40 | high | high | 110 g | 3-iron | Moderate | ACHL95-40-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 39.5 | high | high | 120 g | 4-iron | Moderate | ACHL105-395-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 39 | high | high | 120 g | 5-iron | Moderate | ACHL105-39-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 38.5 | high | high | 120 g | 6-iron | Moderate | ACHL105-385-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 38 | high | high | 120 g | 7-iron | Moderate | ACHL105-38-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 37.5 | high | high | 120 g | 8-iron | Moderate | ACHL105-375-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 37 | high | high | 120 g | 9-iron | Moderate | ACHL105-37-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 36.5 | high | high | 120 g | PW | Moderate | ACHL105-365-TT-HT |
| M4 | Blue | 105 | 1.5 | 0.355 | 0.6 | 40 | high | high | 120 g | 3-iron | Moderate | ACHL105-40-TT-HT |
What's on this page
Complete3 of 3 built
Everything we publish about a shaft is on this page.
- ACCRA's own specs, built.Read from ACCRA's published spec sheet, linked at the foot of this page.
- Flex options, built.16 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
This shaft is as complete as our sources allow. Coverage sets out what we hold across the whole site, and what we don't.