ACCRA shaft
The ACCRA ARC Aspire is a driver/fairway/hybrid shaft in 4 flexes — it weighs 45–55 g with 4–6° torque.
Weight and torque, one panel eachpublished figures only
How this shaft reads against the database
Flex
4 distinct weight-and-torque points across 5 flexes are ringed. Pick one above to read its exact position.
Weight and torque against every driver shaft
Every driver shaft variant on record publishing both a weight and a torque, binned by density — the ringed marks are this shaft.
Launch and spin, as published
ACCRA rates this shaft high launch and high spin — the shading is how many of the 816 rated shafts on record share each square.
STIFFNESS BY SECTION
Neither ACCRA nor our derived profile has a stiffness reading for the butt, mid and tip of this shaft. Nothing here is estimated, so there is nothing to draw.
Specifications by flex
What this record publishes. Across 5 flex options: weight, torque, tip diameter, launch rating and spin rating on every one; no kick point at all.
5 rows, unsorted.
| M2 | 45 | 6 | 0.335 | 0.58 | 44 | high | high | Driver | Deliberate | not published |
| M3 | 50 | 5 | 0.335 | 0.6 | 45 | high | high | Driver | Deliberate | not published |
| M4 | 55 | 4 | 0.335 | 0.58 | 46 | high | high | Driver | Deliberate | not published |
| Variable | 55 | 4.5 | 0.335 | 0.58 | 43 | high | high | Fairway Wood | Deliberate | 55 g |
| Variable | 55 | 4.5 | 0.335 | 0.58 | 41 | high | high | Hybrid | Deliberate | 55 g |
What's on this page
Complete3 of 3 built
Everything we publish about a shaft is on this page.
- ACCRA's own specs, built.Read from ACCRA's published spec sheet, linked at the foot of this page.
- Flex options, built.5 flexes, each with a published weight.
- Launch, spin and torque, built.Published for every flex — the figures a fitter compares shafts on.
This shaft is as complete as our sources allow. Coverage sets out what we hold across the whole site, and what we don't.