TaylorMade iron
The TaylorMade Burner Superlaunch Iron Set is an iron in 10 options from 20°–56°.
Built against the iron fieldpublished figures only
Image not published
Where this club lands
The field is every iron in the database that publishes both of the chart's figures — every brand, not just TaylorMade.
This set's 7-iron is 33° — 72nd percentile, weaker-lofted than 72% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
TaylorMade Burner Superlaunch Iron Setmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
TaylorMade Burner Superlaunch Iron Set · 7 Iron
- LOFT · X AXIS33°
- 72nd percentile — weaker-lofted than 72% of the 889 sets that publish a 7-iron
- LIE · Y AXIS63°
- 97th percentile — more upright than 97% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
TaylorMade Burner Superlaunch Iron Set · 7 Iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
TaylorMade's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
TaylorMade Burner Superlaunch Iron Setmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
Specifications by option
What this record publishes. Across 10 options: loft, lie, length and swingweight on every one.
10 rows, unsorted, collapsed — use the button below the table to show every option.
| 20 | 3 Iron | 60.25 | 0.256 | 39.5 | D3.5 |
| 23 | 4 Iron | 61 | 0.24 | 38.75 | D3.5 |
| 26 | 5 Iron | 61.75 | 0.224 | 38.25 | D3.5 |
| 29 | 6 Iron | 62.5 | 0.209 | 37.75 | D3.5 |
| 33 | 7 Iron | 63 | 0.181 | 37 | D3.5 |
| 37 | 8 Iron | 63.5 | 0.157 | 36.5 | D3.5 |
| 41 | 9 Iron | 64 | 0.134 | 36 | D3.5 |
| 46 | PW | 64.5 | 0.11 | 35.5 | D3.5 |
| 51 | AW | 64.5 | 0.087 | 35.5 | D3.5 |
| 56 | SW | 64.5 | 0.063 | 35.25 | D5 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means TaylorMade did not publish that figure — we don't estimate.
TaylorMade publishes offset in millimetres; the offset (in) column is that figure converted, and the record keeps TaylorMade's own figure verbatim.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | 2010 | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 33° | =568th of 953 | too few comparable clubs to place | =52nd of 86 TaylorMade irons · =214th of 237 mid-handicap irons |
| Most offset at the 7-iron | 0.181" | =82nd of 583 | too few comparable clubs to place | =15th of 68 TaylorMade irons · 16th of 145 mid-handicap irons |
| Widest loft range | 36° | =280th of 1,104 | too few comparable clubs to place | =44th of 89 TaylorMade irons · =51st of 237 mid-handicap irons |
| Most upright lie | 63° | =33rd of 941 | too few comparable clubs to place | =2nd of 83 TaylorMade irons · =7th of 233 mid-handicap irons |
| Longest | 37" | =265th of 894 | too few comparable clubs to place | =17th of 85 TaylorMade irons · =74th of 227 mid-handicap irons |
player level — derived
This iron reads as built for a mid-handicap player — our deterministic reading of 7-iron offset 0.181", 7-iron loft 33° (traditional players loft). A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs Cleveland CG1 Tour Iron Set · vs Cobra S3 Irons · vs Titleist AP1
More irons
TaylorMade Burner Iron Set 2009 · 19°–60° · 11 options TaylorMade R9 Iron Set 2009 · 20°–55° · 10 options TaylorMade R9 TP Iron Set 2009 · 19.5°–51° · 10 options TaylorMade Tour Preferred CB Iron Set 2011 · 20°–50° · 9 options TaylorMade Tour Preferred Iron Set 2009 · 18°–60° · 12 options TaylorMade Tour Preferred MB Iron Set 2011 · 18°–47° · 9 options TaylorMade Tour Preferred MC Iron Set 2011 · 17°–47° · 9 options Cleveland CG1 Tour Iron Set 2010 · 18°–47° · 9 options
Other TaylorMade irons on record. Irons released in 2010 by other brands, one per brand. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- TaylorMade's own specs, not built yet.We haven't found TaylorMade's own page for this club yet — everything here comes from the sources listed at the foot of the page.
- Published options, built.10 configurations with 5 of the 7 specs an iron can publish.
- Stock shaft, built.TaylorMade names no stock shaft for this club on the sources we hold, so there's nothing to link.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.